Electric Smoker OR Landfill: What say you?
-
processhead Have you worked with or researched any combination temperature and humidity controllers that you recommend? So many out there and quite a price range.
Chef said in Electric Smoker OR Landfill: What say you?:
processhead Have you worked with or researched any combination temperature and humidity controllers that you recommend? So many out there and quite a price range.
I have not done much research, but am generally aware that the controls are out there and getting more affordable.
What I have not seen are good plug and play humidity sources that are affordable and have good control capability for our processing applications.
-
processhead Have you worked with or researched any combination temperature and humidity controllers that you recommend? So many out there and quite a price range.
Chef Done the build on the “Sausage Maker” combination temperature and humidity controller setup before. Getting hard to find metal lined refers to convert these days. Sausage Maker, Pricey but reliable. I will be in their Buffalo NY store in a few days. Will send pics and specs if you want. They do sell all the parts for the build as needed. Cheers
-
Chef Done the build on the “Sausage Maker” combination temperature and humidity controller setup before. Getting hard to find metal lined refers to convert these days. Sausage Maker, Pricey but reliable. I will be in their Buffalo NY store in a few days. Will send pics and specs if you want. They do sell all the parts for the build as needed. Cheers
JoeB Yes, please send pictures. I’ll be lining with sheet aluminum whatever unit I use.
Thanks
-
Chef Done the build on the “Sausage Maker” combination temperature and humidity controller setup before. Getting hard to find metal lined refers to convert these days. Sausage Maker, Pricey but reliable. I will be in their Buffalo NY store in a few days. Will send pics and specs if you want. They do sell all the parts for the build as needed. Cheers
JoeB said in Electric Smoker OR Landfill: What say you?:
Chef Done the build on the “Sausage Maker” combination temperature and humidity controller setup before. Getting hard to find metal lined refers to convert these days. Sausage Maker, Pricey but reliable. I will be in their Buffalo NY store in a few days. Will send pics and specs if you want. They do sell all the parts for the build as needed. Cheers
I would be interested in seeing what they offer too. Thanks for offering pics and specs.
-
JoeB Yes, please send pictures. I’ll be lining with sheet aluminum whatever unit I use.
Thanks
Chef Please to share your proposed method to line a refer with aluminum. What are you using to seal the vertical and horizonal meeting Planes?
-
Just a short progress report. The original plastic shelves on the door are gone and replaced with sheet metal. I used aluminum trim coil that I cut and fit to the same dimensions as the plastic shelf. The trim coil was not wide enough to do with a single piece of material so I cut two pieces that overlap and used contact cement to attach them together. You have to look hard to see the joint.
I hung the door back on the cabinet to convince myself I am making progress. lol
Paul
-
A lot of good work their
-
Just a short progress report. The original plastic shelves on the door are gone and replaced with sheet metal. I used aluminum trim coil that I cut and fit to the same dimensions as the plastic shelf. The trim coil was not wide enough to do with a single piece of material so I cut two pieces that overlap and used contact cement to attach them together. You have to look hard to see the joint.
I hung the door back on the cabinet to convince myself I am making progress. lolprocesshead Thanks for the update! Like many others here, I’m watching this build intently.
-
Just a short progress report. The original plastic shelves on the door are gone and replaced with sheet metal. I used aluminum trim coil that I cut and fit to the same dimensions as the plastic shelf. The trim coil was not wide enough to do with a single piece of material so I cut two pieces that overlap and used contact cement to attach them together. You have to look hard to see the joint.
I hung the door back on the cabinet to convince myself I am making progress. lolprocesshead thanks again for an update on the progress.
-
Just a short progress report. The original plastic shelves on the door are gone and replaced with sheet metal. I used aluminum trim coil that I cut and fit to the same dimensions as the plastic shelf. The trim coil was not wide enough to do with a single piece of material so I cut two pieces that overlap and used contact cement to attach them together. You have to look hard to see the joint.
I hung the door back on the cabinet to convince myself I am making progress. lolprocesshead it’s looking good man.
-
Making great progress keep going
-
Just a short progress report. The original plastic shelves on the door are gone and replaced with sheet metal. I used aluminum trim coil that I cut and fit to the same dimensions as the plastic shelf. The trim coil was not wide enough to do with a single piece of material so I cut two pieces that overlap and used contact cement to attach them together. You have to look hard to see the joint.
I hung the door back on the cabinet to convince myself I am making progress. lolprocesshead looks great. Thanks for updating us.
-
If it still cools then a curing chamber would be my other thought, but you’ll need a lot more stuff to do that! My first attempt at a curing chamber is at the dump or maybe now part of a Chinese-made toy. The humidity control is a pain especially for us in the south…
-
Pivodog said in Electric Smoker OR Landfill: What say you?:
Smoker!! Is it all metal inside?
Metal insides. I replaced the plastic shelf on the door with a flat metal panel.
There is some plastic trim pieces that are going to be removed/replaced as well. -
samspade said in Electric Smoker OR Landfill: What say you?:
Making great progress keep going
Thanks for the encouragement!
-
Pivodog said in Electric Smoker OR Landfill: What say you?:
Paul, you could also add an external smokebox so that it could used as a cold smoker.
At this point my plans are to use an A-mazing pellet smoke generator in an external metal enclosure.
-
Pivodog said in Electric Smoker OR Landfill: What say you?:
do you have a pic of the smoke generator?
.I will fabricate a box underneath and put the A-mazing pellet unit inside
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register LoginSponsored By:
