#12 Knife does not fit my grinder
-
-
This post is deleted!
-
-
Jonathon I mailed it back yesterday. You should try to catch it and see if there are any discrepancies from other #12’s. It would be nice to see if there is a consistency issue and nail it down so there’s do not lose money sending it back. If you need any numbers I can mic my auger. I sent it back attn: RMA 3740 if that helps.
-
iowa arborist that is a big difference.
BrianB I think so as well. I’m kinda waiting to hear back on how I should proceed
-
BrianB I will ask that it be brought to me when it comes in.
-
BrianB iowa arborist This arrived yesterday and I had the time to do some checking this morning and it does NOT work with a Weston #12 Butcher or Pro Series Grinder. I have updated the website to include that information and am very sorry, the #22 everlasting knife works perfectly with the #22 Pro Series Grinder, so I have no clue why this would be different with a #12.
I also tried a few other knives to make sure that it wasn’t just this particular one and it is all of them that have a problem.
Get more help with your processing questions and learn more about processing meat by subscribing to our waltonsinc.com youtube page at https://wltns.link/waltonstv I am a Gorilla, love yourself
-
BrianB iowa arborist This arrived yesterday and I had the time to do some checking this morning and it does NOT work with a Weston #12 Butcher or Pro Series Grinder. I have updated the website to include that information and am very sorry, the #22 everlasting knife works perfectly with the #22 Pro Series Grinder, so I have no clue why this would be different with a #12.
I also tried a few other knives to make sure that it wasn’t just this particular one and it is all of them that have a problem.
Jonathon I have the butcher series #32 so do they just not fit any of the butcher series then? Mine goes on fine its just to thick to let the plate fit correctly
-
BrianB iowa arborist This arrived yesterday and I had the time to do some checking this morning and it does NOT work with a Weston #12 Butcher or Pro Series Grinder. I have updated the website to include that information and am very sorry, the #22 everlasting knife works perfectly with the #22 Pro Series Grinder, so I have no clue why this would be different with a #12.
I also tried a few other knives to make sure that it wasn’t just this particular one and it is all of them that have a problem.
-
iowa arborist I just checked against a #32 butcher series grinder and it DOESN’T work. I dont have a #32 pro to compare it to but I can say it absolutely works on the #22 Pro Series.
-
iowa arborist and I am now questioning this. I might be using the Value Hard Grinder. I am going to do some testing and I will update
-
iowa arborist and anyone else, I was right the #22 pro works with the everlast and the Value Hard Knife.
Get more help with your processing questions and learn more about processing meat by subscribing to our waltonsinc.com youtube page at https://wltns.link/waltonstv I am a Gorilla, love yourself
-
iowa arborist and anyone else, I was right the #22 pro works with the everlast and the Value Hard Knife.
Jonathon
What about the #22 butcher series? -
Argh, I dont have one to test right now but I believe that they will. Once we get a butcher series back in stock I will test it right away.
-
This is odd. Everlasting knife vs value hard knife. After one grind and wash the value hard showed immediate signs of rust. Must be the metal composition. Even worse two days later. Both were sprayed with silicon after drying. It did cut very nicely but…
-
I bought some knives years ago for my thunderbird #12 grinder and they were too thick and would not let the auger turn, I never got around to grinding the sholders off to let them work. I am contemplating purchasing a #32 butcher series hopefully they get the issue resolved.
-
PapaSop I’ve seen that on the back edge of the knife but never on the leading edge. Hitting it with silicon will do the trick.
-
This is odd. Everlasting knife vs value hard knife. After one grind and wash the value hard showed immediate signs of rust. Must be the metal composition. Even worse two days later. Both were sprayed with silicon after drying. It did cut very nicely but…
PapaSop that’s because the blades of the Value hard are brazed onto cheap casting. The Everlasting is cast and machined out of one piece of steel.
-
PapaSop that’s because the blades of the Value hard are brazed onto cheap casting. The Everlasting is cast and machined out of one piece of steel.
johnsbrewhouse
Thanks for the info. Everlasting going forward. -
P processhead referenced this topic on
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register LoginSponsored By:
