Smoker Upgrade!
-
Retired157 I use a mortar mixing tub, they are food grade and come it two sizes. I use the smaller of the two, clean up isn’t too bad as they are smooth and the ends are sloped so not much for corners.
bocephus said in Smoker Upgrade!:
Retired157 I use a mortar mixing tub, they are food grade and come it two sizes. I use the smaller of the two, clean up isn’t too bad as they are smooth and the ends are sloped so not much for corners.
I ordered one of these and it should be in tomorrow for clean ups, hopefully it will make things easier. I will keep it unhooked so I can move it around, so we will see.
-
bocephus said in Smoker Upgrade!:
Retired157 I use a mortar mixing tub, they are food grade and come it two sizes. I use the smaller of the two, clean up isn’t too bad as they are smooth and the ends are sloped so not much for corners.
I ordered one of these and it should be in tomorrow for clean ups, hopefully it will make things easier. I will keep it unhooked so I can move it around, so we will see.
I might have to see if I can’t ‘incorporate’ that in my garage. I actually did a lot of my clean up in the bath tub. My wife was not at home… she didn’t ‘ask’ so I’m guessing I did ok.
-
I might have to see if I can’t ‘incorporate’ that in my garage. I actually did a lot of my clean up in the bath tub. My wife was not at home… she didn’t ‘ask’ so I’m guessing I did ok.
Retired157 Ok that is too funny!!!
-
I might have to see if I can’t ‘incorporate’ that in my garage. I actually did a lot of my clean up in the bath tub. My wife was not at home… she didn’t ‘ask’ so I’m guessing I did ok.
Retired157 that is a very nice muley in your avatar
-
Retired157 that is a very nice muley in your avatar
Thanks… sometimes I do get lucky.
-
Wow, what a great thread. So much great knowledge and interesting builds! Plus all the wildlife etc.
Well, I spent all day reading about Sausages instead of making my snack sticks, just reading old threads and replying to a few… couldn’t let my attention wander too much and make sausage. This seems like a great place to explain why … NEW LAB PUPPY, HER FIRST DAY AT HOME!! Yep, spent the day puppy priofing house, cleaning up messes, bonding etc, and reading this great community!
-
Wow, what a great thread. So much great knowledge and interesting builds! Plus all the wildlife etc.
Well, I spent all day reading about Sausages instead of making my snack sticks, just reading old threads and replying to a few… couldn’t let my attention wander too much and make sausage. This seems like a great place to explain why … NEW LAB PUPPY, HER FIRST DAY AT HOME!! Yep, spent the day puppy priofing house, cleaning up messes, bonding etc, and reading this great community!
-
Wow, what a great thread. So much great knowledge and interesting builds! Plus all the wildlife etc.
Well, I spent all day reading about Sausages instead of making my snack sticks, just reading old threads and replying to a few… couldn’t let my attention wander too much and make sausage. This seems like a great place to explain why … NEW LAB PUPPY, HER FIRST DAY AT HOME!! Yep, spent the day puppy priofing house, cleaning up messes, bonding etc, and reading this great community!
Dave in AZ Sounds like a day that you will remember. Glad you found it entertaining as we do.
-
Dave in AZ our Spinone is 9 month and there is no puppy proofing that will stop a determined nose. Good luck with your new buddy.
-
Dave in AZ That’s a cutie you have there. A quick learner, He already knows how to pose for the camera. He deserves a treat.
By the way, welcome to the Community. -
Wow, what a great thread. So much great knowledge and interesting builds! Plus all the wildlife etc.
Well, I spent all day reading about Sausages instead of making my snack sticks, just reading old threads and replying to a few… couldn’t let my attention wander too much and make sausage. This seems like a great place to explain why … NEW LAB PUPPY, HER FIRST DAY AT HOME!! Yep, spent the day puppy priofing house, cleaning up messes, bonding etc, and reading this great community!
Dave in AZ said in Smoker Upgrade!:
Wow, what a great thread. So much great knowledge and interesting builds! Plus all the wildlife etc.
Well, I spent all day reading about Sausages instead of making my snack sticks, just reading old threads and replying to a few… couldn’t let my attention wander too much and make sausage. This seems like a great place to explain why … NEW LAB PUPPY, HER FIRST DAY AT HOME!! Yep, spent the day puppy priofing house, cleaning up messes, bonding etc, and reading this great community!
Sounds like a great way to spend a day. Enjoy your pup.
-
Dave in AZ beautiful puppy thanks for sharing
-
I agree, this is an awesome thread. I learned a lot. I only had a 30 inch tall smoker and was handcuffed to the length of sausage I could hang.
I cut the legs off and welded up a box to replace them. Switched from propane to electric and added a thermal blanket enclosing all in wood. I had a Bradley smoke generator hanging around so I mounted that also. Build a PID thanks to this thread!!!
I’m almost finished with this build, I need to add a fan. I promise to add pictures when I finish this with some sausage photos. -
I agree, this is an awesome thread. I learned a lot. I only had a 30 inch tall smoker and was handcuffed to the length of sausage I could hang.
I cut the legs off and welded up a box to replace them. Switched from propane to electric and added a thermal blanket enclosing all in wood. I had a Bradley smoke generator hanging around so I mounted that also. Build a PID thanks to this thread!!!
I’m almost finished with this build, I need to add a fan. I promise to add pictures when I finish this with some sausage photos.scottfletcher Holding you to those pictures. Always interesting to see the homemade modifications people do to enhance their equipment.
-
The more I read, them more I’m leaning to a PID temp controlled chamber with convection recirc fan to ensure even temps throughout, electric and just add an external smoke generator. Probably Bellas cold smoke generator by Smokin It. I need to read more and ask more… but all the smoker needs to do is accurate and even temp control 60 to 180 deg or so, those smoke gens put out good for 8 hrs, plenty enough smoke. Then add some humidifier PID sensor and feed to it. I live in AZ, so not a lot of heat generation needed…
I just am not finding a commercial ready made one with both humidity and temp, am I missing an obvious one? -
The more I read, them more I’m leaning to a PID temp controlled chamber with convection recirc fan to ensure even temps throughout, electric and just add an external smoke generator. Probably Bellas cold smoke generator by Smokin It. I need to read more and ask more… but all the smoker needs to do is accurate and even temp control 60 to 180 deg or so, those smoke gens put out good for 8 hrs, plenty enough smoke. Then add some humidifier PID sensor and feed to it. I live in AZ, so not a lot of heat generation needed…
I just am not finding a commercial ready made one with both humidity and temp, am I missing an obvious one?Dave in AZ I use a inkbird to control my smoker. Since the inkbird wiring cant take the 15amp load of the smoker, it controls a relay box. That 20amp relay let’s the outlet connect to the smoker. By putting the temp probe near the heating element I can control temps ± 5degrees. Inkbird also make a humidity controller but with a water pan and chamois rags my Rh seems adequate. Either temp or humid is about 30 bucks on offer up or marketplace.
-
samspade I am curious about your temp probe location near the element? Have you monitored your chamber temperature with a separate external temp probe at a few locations in the chamber to see how close they are to the set point? I see you are using an ink bird controller. Which one, and is it a PID?
Dave in AZ I have been sort of thinking about humidity control as well. I am not aware of any off-the-shelf solutions for smokers that out there either.Paul
-
samspade I am curious about your temp probe location near the element? Have you monitored your chamber temperature with a separate external temp probe at a few locations in the chamber to see how close they are to the set point? I see you are using an ink bird controller. Which one, and is it a PID?
Dave in AZ I have been sort of thinking about humidity control as well. I am not aware of any off-the-shelf solutions for smokers that out there either.processhead I use the ITC310C. It’s a 12 time/temp stage unit. So I can set my whole cook up and just walk away.
My masterbuilt draws 15 amps I think and the inkbird can only handle 10-12amps.
We made box that plugs into the outlet has one 120 receptical on the box, a 20amp rated relay attached to a 20amp rated cord with female plug. The the on/off relay connects to a cord and plug that attaches to the inkbird heating-cooling female plug.The temp probe goes in the open door and sits very close to the heating element.
Once the smoker has warmed up (usually 130 to 140) I plug everything together. The pod will turn the element on and off every 1-2 mins as it sees the temp increasing rapidly. Since the element stays warm for a while after it looses power the temp falls slowly until the pid turns back on.
It works really well.Oh, when I start I have the smoker directly connected to the wall and turned to about 140. When its warmed up I unplug it and plug everything together.
Temps from both wireless and wired probes show the temps stay close to program you just have to find the sweet spot for the temp prob. To close to the element and it does not get to the desired temp. To far and you get wide swings.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register LoginSponsored By:
