Sous Vide suggestions and questions- 25lb Batches
-
Not trying to beat a dead horse but looking for suggestions on what model Sous Vide everyone is using for bigger batches.
I know some say they can only heat up X amounts of water but what if you start with hot water?
What is everyones cook schedule? Heat in smoker till 130 then finish in Sous Vide to X temp?
Jonathon & Austin will Waltons be carrying any Sous Vide options in the near future?
Gmoran Heads up Costco has the Anova Precision Cooker Kit (Anova unit plus water tub/lid) on sale for $159 online and in-store (mine at least). Is normally $200.
-
Gmoran Heads up Costco has the Anova Precision Cooker Kit (Anova unit plus water tub/lid) on sale for $159 online and in-store (mine at least). Is normally $200.
Jamieson22 Thanks for the heads up. I just ordered one.
-
Lance said in Sous Vide suggestions and questions- 25lb Batches:
Have you modified the Anova pro to fit through the lid of a cooler like that? I’ve been looking at trying it.
I cut a hole in cooler lid for my Anova, however it raises it up so much it it takes a lot of water to reach the Min line on the unit. So the times I’ve used it I just clamped the Anova onto the side wall of cooler and left lid open. If I were doing a long cook I’d be concerned but for a 2 hour max cook for sausage I wasn’t worried about heat/evap loss.
Here’s how I designed my ‘solution’ to that problem of having the Anova held ‘to high’ from the water… using 3" PVC. Now my Anova actually goes ‘through’ the lid and sits well ‘inside’ the cooler. It sits about 3" ‘deeper’ doing it this way… and with a full cooler, my water level is nearly at the ‘MAX’ line. In fact, if I were to make that ‘slot’ you see there in the first pic (it’s to allow for the power chord) even deeper (to the bottom of the lid), I could submerge the Anova another 1" into the water but from what I can tell, this design gives me all the depth I need. I simply (after placing my SS in) level the water till it’s coming through that hole you see as cut in the bottom of that 3" cap. At that point, the Anova is basically submerged to its ‘MAX’ line. Hope that makes sense…
/Users/Ron/Pictures/Ron’s Photos Library.photoslibrary/originals/D/D131D5B1-6CD0-404B-AD86-4DBB9D4AAF33.jpeg
/Users/Ron/Pictures/Ron’s Photos Library.photoslibrary/originals/9/91DB2BCD-AA88-4CEF-8321-F57C6A5C710E.jpeg
/Users/Ron/Pictures/Ron’s Photos Library.photoslibrary/originals/9/90F19B01-D197-4F65-B32D-F27B7DDD7142.jpeg
/Users/Ron/Pictures/Ron’s Photos Library.photoslibrary/originals/0/00CE50AD-4D73-4AC0-99A0-1DE658067B83.jpeg -
I have the Vacmaster SV1 that Walton’s used to carry. Combined with a 33 quart Coleman party cooler that lkrfletcher turned me onto, it makes a solid sous vide combo for finishing sausage. My tap water is 160 degrees, so I usually just fill the cooler out of the sink and set the SV to 170. About 10 minutes and it is up to temp. There are no bells and whistles, blue tooth or wifi. Just set it and go.
-
I have the Vacmaster SV1 that Walton’s used to carry. Combined with a 33 quart Coleman party cooler that lkrfletcher turned me onto, it makes a solid sous vide combo for finishing sausage. My tap water is 160 degrees, so I usually just fill the cooler out of the sink and set the SV to 170. About 10 minutes and it is up to temp. There are no bells and whistles, blue tooth or wifi. Just set it and go.
Grimpuppy said in Sous Vide suggestions and questions- 25lb Batches:
My tap water is 160 degrees
Unrelated to sous vide but that is kinda dangerously high, no?
-
Grimpuppy said in Sous Vide suggestions and questions- 25lb Batches:
My tap water is 160 degrees
Unrelated to sous vide but that is kinda dangerously high, no?
Jamieson22 said in Sous Vide suggestions and questions- 25lb Batches:
Grimpuppy said in Sous Vide suggestions and questions- 25lb Batches:
My tap water is 160 degrees
Unrelated to sous vide but that is kinda dangerously high, no?
Yes it is, I would not recommend it with children in the house.
-
I have the Vacmaster SV1 that Walton’s used to carry. Combined with a 33 quart Coleman party cooler that lkrfletcher turned me onto, it makes a solid sous vide combo for finishing sausage. My tap water is 160 degrees, so I usually just fill the cooler out of the sink and set the SV to 170. About 10 minutes and it is up to temp. There are no bells and whistles, blue tooth or wifi. Just set it and go.
Grimpuppy that’s some hot tap water! Why is your tap water so hot? 130-135 is about the normal range
-
I like to have hot water available without having to heat it up in a pot I guess.
-
Ordered an Anova Pro. Thanks for the help guys.
-
I use the anova sous vide machine I got at costco. I do 20 lb. batches of snack sticks and summer sausage and they both come out great. I use a cooler I have rigged up to hold the unit and I start with hot water around 155 to 160 degrees. My target temp. is usually 152 and by the time I take the product out of the smoker and vacuum bag it it has cooled some so when it is all put in the water bath the temp is pretty close. A little warmer is better than a little cooler so the machine does’nt have to work so hard to get back up to temp.
-
I use the anova sous vide machine I got at costco. I do 20 lb. batches of snack sticks and summer sausage and they both come out great. I use a cooler I have rigged up to hold the unit and I start with hot water around 155 to 160 degrees. My target temp. is usually 152 and by the time I take the product out of the smoker and vacuum bag it it has cooled some so when it is all put in the water bath the temp is pretty close. A little warmer is better than a little cooler so the machine does’nt have to work so hard to get back up to temp.
-
mdseaside great looking setup
that should hold plenty of meat 
-
Perfect!
-
mdseaside Nice. That is a simple idea that works
-
Gmoran said in Sous Vide suggestions and questions- 25lb Batches:
Ordered an Anova Pro. Thanks for the help guys.
You will not regret it
-
kyle Yes. I had to make one. The original lid held the sousvide machine up to high. I used heavy plexiglass and then cover it with a towel to help with loss.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register LoginSponsored By:
