aluminum lined smoker
-
cdavis same here, I’m thinking the aluminum would be fine, but since I’ve never made one, I’d like to know.
GWG8541 I passed up one of those last year because it was aluminum lined. I might be kicking myself when we get the answer.
-
I have one but dont remember if it is alum lined it also has some black plastic around the door frame if I remember I took the inside of the door off and replaced it with metal next I lined the door edge (glued) a fire rope around the door for a better seal
-
I have one but dont remember if it is alum lined it also has some black plastic around the door frame if I remember I took the inside of the door off and replaced it with metal next I lined the door edge (glued) a fire rope around the door for a better seal
fisherman43 the one I have has no plastic in or on it at all. my other concern is with fiberglass insulation, will that hurt anything? It is sealed good on the inside, but dont want any funky flavors
-
I am following to hear processhead’s answer. I would venture the guess that it is perfectly good to use
-
I would have no problem using a cabinet with an aluminum lining for a smoker. Fiberglass insulation is fine too, assuming it is not exposed, which would be pretty unusual in an undamaged refrigerator.
At smoking/cooking temps, aluminum presents no problems, nor does fiberglass when it is behind/ under a metal liner.
This sounds like the basis of an excellent smoker.Paul
-
I would have no problem using a cabinet with an aluminum lining for a smoker. Fiberglass insulation is fine too, assuming it is not exposed, which would be pretty unusual in an undamaged refrigerator.
At smoking/cooking temps, aluminum presents no problems, nor does fiberglass when it is behind/ under a metal liner.
This sounds like the basis of an excellent smoker. -
I would have no problem using a cabinet with an aluminum lining for a smoker. Fiberglass insulation is fine too, assuming it is not exposed, which would be pretty unusual in an undamaged refrigerator.
At smoking/cooking temps, aluminum presents no problems, nor does fiberglass when it is behind/ under a metal liner.
This sounds like the basis of an excellent smoker.processhead thanks for your input. It’s a very solid old fridge. When I get it done, it’s going to be another wood fired smoker like my one made out of a old vending machine, but I might make it where I can slide a propane element in if I’m feeling lazy. Thanks again for responding
hey vegetarians, my food poops on your food!
-
processhead thanks for your input. It’s a very solid old fridge. When I get it done, it’s going to be another wood fired smoker like my one made out of a old vending machine, but I might make it where I can slide a propane element in if I’m feeling lazy. Thanks again for responding
Here is a pic of the outsidehey vegetarians, my food poops on your food!
-
kyle That looks like a beast. Since you are using wood as a fuel, is your plan to have the fire inside or to have an external fire box?
The reason I ask is because a wood fire inside can get pretty hot. You would probably want to come up with some kind of heavy metal base and grate to protect the bottom of the cabinet.
-
kyle Dang, what a find!!
processhead Thanks for the input. Now I will be on the hunt for one
-
kyle Please keep us up to date with how that goes. As far as aluminum goes, the only time it is an issue (that I can think of right now) is when you are trying to marinade something in an acidic solution The acidity reacts with the aluminum, how big of a deal this is I really don’t know but I know I stopped doing it within months of doing these videos as someone pointed it out to me and I looked it up. As far as just lined in the smoker it wont be a problem. I put things in aluminum pans when I am smoking/cold smoking all the time.
-
kyle That looks like a beast. Since you are using wood as a fuel, is your plan to have the fire inside or to have an external fire box?
The reason I ask is because a wood fire inside can get pretty hot. You would probably want to come up with some kind of heavy metal base and grate to protect the bottom of the cabinet.
processhead said in aluminum lined smoker:
kyle That looks like a beast. Since you are using wood as a fuel, is your plan to have the fire inside or to have an external fire box?
The reason I ask is because a wood fire inside can get pretty hot. You would probably want to come up with some kind of heavy metal base and grate to protect the bottom of the cabinet.
It is going to be on 1 course of block, where the legs are, it will be filled in, and on the front will be a door to access the fire box. I have skid-plates off a kubota that will be the heat diffuser (its pretty heavy and already has slots and holes in it) between the firebox and smoke chamber. Still in the planning process, but in my head it will work great when its done
hey vegetarians, my food poops on your food!
-
I would have no problem using a cabinet with an aluminum lining for a smoker. Fiberglass insulation is fine too, assuming it is not exposed, which would be pretty unusual in an undamaged refrigerator.
At smoking/cooking temps, aluminum presents no problems, nor does fiberglass when it is behind/ under a metal liner.
This sounds like the basis of an excellent smoker.processhead thanks for your reply.
-
kyle Please keep us up to date with how that goes. As far as aluminum goes, the only time it is an issue (that I can think of right now) is when you are trying to marinade something in an acidic solution The acidity reacts with the aluminum, how big of a deal this is I really don’t know but I know I stopped doing it within months of doing these videos as someone pointed it out to me and I looked it up. As far as just lined in the smoker it wont be a problem. I put things in aluminum pans when I am smoking/cold smoking all the time.
Jonathon It will be interesting following the build, keep us up to date.
-
kyle man that thing looks awesome
. It has smoker written all over it. -
processhead said in aluminum lined smoker:
kyle That looks like a beast. Since you are using wood as a fuel, is your plan to have the fire inside or to have an external fire box?
The reason I ask is because a wood fire inside can get pretty hot. You would probably want to come up with some kind of heavy metal base and grate to protect the bottom of the cabinet.
It is going to be on 1 course of block, where the legs are, it will be filled in, and on the front will be a door to access the fire box. I have skid-plates off a kubota that will be the heat diffuser (its pretty heavy and already has slots and holes in it) between the firebox and smoke chamber. Still in the planning process, but in my head it will work great when its done
kyle congrats on a great find.
-
cdavis thanks. If I didn’t take it, it was going to the scrap yard and I just couldn’t let that happen. With hunting season on now, it might be a while before its done, but its in my shop so I can monkey around with it
hey vegetarians, my food poops on your food!
-
cdavis thanks. If I didn’t take it, it was going to the scrap yard and I just couldn’t let that happen. With hunting season on now, it might be a while before its done, but its in my shop so I can monkey around with it
kyle wish I was closer I’d love to help you tinker with that thing.
-
cdavis said in aluminum lined smoker:
kyle wish I was closer I’d love to help you tinker with that thing.
I looked it up, it would only be a 14 hour drive, 948 miles. And all this time I thought you were my friend.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register LoginSponsored By:
