What did everyone cook today?
-
The wife picked up some boneless skinless chicken breast and wanted me to do something healthier with them. So I made a salad.
GWG8541 Please id your fryer. Looks good on the stove top. What is the make, and is it low maintenance… I have 2 but never thought about setting one on the stove top… Always counter top
-
Steve Winscot what is the recipe for getting it all together after you chop up the ham
gus4416 I use trimmed pork sirloin soaked in ham cure for the specified time rotating daily, soak it out for 2-3 days rotating it daily so it isn’t too salty, grind and add sure gel binder, about 3 ounces per 25lbs, and high temp cheese. Stuff into red bologna casing and then into the smoker.
-
Steven Winscot That’s one heck of a day’s work.
-
Steve Winscot That part of Montana is a wonderful place to be. Got an extended inspection assignment in Great Falls about 7-8 years ago & really enjoyed that part of the country. I could really live there. The country was great, the people were great, everything. I was there just as Summer was turning to Fall & I did not realize it could get that hot there, then of course the temps could drop pretty well too. Loved it though, no humidity amongst many other things.
calldoctoday You’re correct on that part of Montana. Had various trips up there and if you can’t make it to Alaska, that area is it’s kissin’ cousin. Pictures just do it justice.
-
GWG8541 Please id your fryer. Looks good on the stove top. What is the make, and is it low maintenance… I have 2 but never thought about setting one on the stove top… Always counter top
JoeB its a Sam’s club purchase from years ago. I believe it was branded as a “Emeril” fryer (the chef). I put it on the stove so its directly underneath the kitchen vent, which works out well. Yes its fairly low maintenance. After the oil cools, you turn the knob on the front and the oil self stores in the bottom of the unit. The frying pot removes and can be placed in the dishwasher, although I hand wash. Its the first plug in I’ve owned, and we don’t fry allot, but I’m glad I bought it.
-
JoeB its a Sam’s club purchase from years ago. I believe it was branded as a “Emeril” fryer (the chef). I put it on the stove so its directly underneath the kitchen vent, which works out well. Yes its fairly low maintenance. After the oil cools, you turn the knob on the front and the oil self stores in the bottom of the unit. The frying pot removes and can be placed in the dishwasher, although I hand wash. Its the first plug in I’ve owned, and we don’t fry allot, but I’m glad I bought it.
GWG8541 thanks. Looks good. I’ll look it up
-
Celebrating positive results at the eye doctor and regular doc (including the loss of 7 lbs since last visit). Time to add a couple ounces back by making Pierogies stuffed with my polish sausage/kraut, warmed up with onions and mushrooms in a bourbon/beer based sauce. Not as elegant as others here today. But, needed to have some comfort eats.
-
JoeB its a Sam’s club purchase from years ago. I believe it was branded as a “Emeril” fryer (the chef). I put it on the stove so its directly underneath the kitchen vent, which works out well. Yes its fairly low maintenance. After the oil cools, you turn the knob on the front and the oil self stores in the bottom of the unit. The frying pot removes and can be placed in the dishwasher, although I hand wash. Its the first plug in I’ve owned, and we don’t fry allot, but I’m glad I bought it.
GWG8541 I have the same thing. I got three of them years ago, but I don’t think Sam’s had them when I got them. I believe we got them at a department store. We were happy with them for several months, but not now. Don’t get me wrong, I loved the drain setup & oil storage container, especially when we still had the garage refrigerator & they still look brand new to this day. However, the electronics part went out on all three & they want as much as a new unit (I think they were about $150 each) to repair it. The containers, oil vat, main housings & all look brand new so that was sad as I could not find any other way to get parts & repair them myself either. I even wondered if there was some way I could do some sort of “make fit deal” using something different, but never figured that part out. So, we just went back to a cast iron Dutch oven on the stove or the outside gas burner. Not as neat & nifty & certainly not as convenient. But, it does the trick & holds the heat real well. You could not ask for better there. I thought about getting one of those deep V Cajun fryers, but thought I might be back in the same boat as with the Emeril’s. How long have you had yours? A long time I am gathering. So it sounds like we must have got the only three lemons in the batch.
-
Celebrating positive results at the eye doctor and regular doc (including the loss of 7 lbs since last visit). Time to add a couple ounces back by making Pierogies stuffed with my polish sausage/kraut, warmed up with onions and mushrooms in a bourbon/beer based sauce. Not as elegant as others here today. But, needed to have some comfort eats.
zbigjeff That looks comforting!
-
Celebrating positive results at the eye doctor and regular doc (including the loss of 7 lbs since last visit). Time to add a couple ounces back by making Pierogies stuffed with my polish sausage/kraut, warmed up with onions and mushrooms in a bourbon/beer based sauce. Not as elegant as others here today. But, needed to have some comfort eats.
zbigjeff Congratulations on the results, keep up the good work. That is a good reward I see there.
-
Celebrating positive results at the eye doctor and regular doc (including the loss of 7 lbs since last visit). Time to add a couple ounces back by making Pierogies stuffed with my polish sausage/kraut, warmed up with onions and mushrooms in a bourbon/beer based sauce. Not as elegant as others here today. But, needed to have some comfort eats.
zbigjeff I have a recipe for lazy perigee that I will send A few generations old. Taste great
-
GWG8541 I have the same thing. I got three of them years ago, but I don’t think Sam’s had them when I got them. I believe we got them at a department store. We were happy with them for several months, but not now. Don’t get me wrong, I loved the drain setup & oil storage container, especially when we still had the garage refrigerator & they still look brand new to this day. However, the electronics part went out on all three & they want as much as a new unit (I think they were about $150 each) to repair it. The containers, oil vat, main housings & all look brand new so that was sad as I could not find any other way to get parts & repair them myself either. I even wondered if there was some way I could do some sort of “make fit deal” using something different, but never figured that part out. So, we just went back to a cast iron Dutch oven on the stove or the outside gas burner. Not as neat & nifty & certainly not as convenient. But, it does the trick & holds the heat real well. You could not ask for better there. I thought about getting one of those deep V Cajun fryers, but thought I might be back in the same boat as with the Emeril’s. How long have you had yours? A long time I am gathering. So it sounds like we must have got the only three lemons in the batch.
calldoctoday thanks for the evaluation. It just looked good and caught my eye
-
calldoctoday thanks for the evaluation. It just looked good and caught my eye
JoeB Yes, They look great. Ours still look great, but they don’t work any longer due to the electronics. I tried to see if I could repair them easily (as I used to be able to repair pretty much most anything electrical or mechanical up until lets say 25 years ago), but could not see it with what I had available & their cost was prohibitive. They are very convenient, somewhat durable (except the electronics), efficient, & accurate. But, they are now sitting in their respective boxes in one of our pantries. I wish someone could just prove me wrong & set me strait, & show me some ideas on how to get them going again. Believe me. If anyone has any ideas, please let me know. I would have never dreamed of discussing them here, but this is a fantastic neighborhood to be in & it will consistently blow your mind as far as the amount of knowledge, ingenuity, & fantastic cooking (eating) that can come through at any given moment.
-
JoeB Yes, They look great. Ours still look great, but they don’t work any longer due to the electronics. I tried to see if I could repair them easily (as I used to be able to repair pretty much most anything electrical or mechanical up until lets say 25 years ago), but could not see it with what I had available & their cost was prohibitive. They are very convenient, somewhat durable (except the electronics), efficient, & accurate. But, they are now sitting in their respective boxes in one of our pantries. I wish someone could just prove me wrong & set me strait, & show me some ideas on how to get them going again. Believe me. If anyone has any ideas, please let me know. I would have never dreamed of discussing them here, but this is a fantastic neighborhood to be in & it will consistently blow your mind as far as the amount of knowledge, ingenuity, & fantastic cooking (eating) that can come through at any given moment.
calldoctoday thank you for the back brief. So sad but now well armed. Thanks.
-
GWG8541 I have the same thing. I got three of them years ago, but I don’t think Sam’s had them when I got them. I believe we got them at a department store. We were happy with them for several months, but not now. Don’t get me wrong, I loved the drain setup & oil storage container, especially when we still had the garage refrigerator & they still look brand new to this day. However, the electronics part went out on all three & they want as much as a new unit (I think they were about $150 each) to repair it. The containers, oil vat, main housings & all look brand new so that was sad as I could not find any other way to get parts & repair them myself either. I even wondered if there was some way I could do some sort of “make fit deal” using something different, but never figured that part out. So, we just went back to a cast iron Dutch oven on the stove or the outside gas burner. Not as neat & nifty & certainly not as convenient. But, it does the trick & holds the heat real well. You could not ask for better there. I thought about getting one of those deep V Cajun fryers, but thought I might be back in the same boat as with the Emeril’s. How long have you had yours? A long time I am gathering. So it sounds like we must have got the only three lemons in the batch.
calldoctoday I’m sure mine will bite the dust any day. I’ve had it about 2 to 3 years now. I have my Dutch oven ready as well. I also bought one of the square copper fryer/deep skillet with fry basket. I was using that until buying the plug in unit. I got the Emeril at a great price, or I would still be using the square pan with basket on the stove. Heck, I don’t think I paid much more than 150 for it new. Thats crazy they want that much to fix one. In fact, I paid less than 100 for it.
-
Steven Winscot Somebody has been extremely busy!
calldoctoday Meat sale at Winco, couldn’t pass up a good deal.
-
calldoctoday I’m sure mine will bite the dust any day. I’ve had it about 2 to 3 years now. I have my Dutch oven ready as well. I also bought one of the square copper fryer/deep skillet with fry basket. I was using that until buying the plug in unit. I got the Emeril at a great price, or I would still be using the square pan with basket on the stove. Heck, I don’t think I paid much more than 150 for it new. Thats crazy they want that much to fix one. In fact, I paid less than 100 for it.
GWG8541 The concept behind the Emeril was fantastic & exactly what I had been thinking up & looking for at the time. If they could have just kept is simple & old school as far as the heating elements or rather controls went, I think it would be great. Other than that or the cast iron on the stovetop, which is really the most durable & reliable & once cheapest, we would have to go back outside to either the iron or a Cajun propane setup. Emeril is definitely convenient & efficient though & the concept is great!
-
GWG8541 I have the same thing. I got three of them years ago, but I don’t think Sam’s had them when I got them. I believe we got them at a department store. We were happy with them for several months, but not now. Don’t get me wrong, I loved the drain setup & oil storage container, especially when we still had the garage refrigerator & they still look brand new to this day. However, the electronics part went out on all three & they want as much as a new unit (I think they were about $150 each) to repair it. The containers, oil vat, main housings & all look brand new so that was sad as I could not find any other way to get parts & repair them myself either. I even wondered if there was some way I could do some sort of “make fit deal” using something different, but never figured that part out. So, we just went back to a cast iron Dutch oven on the stove or the outside gas burner. Not as neat & nifty & certainly not as convenient. But, it does the trick & holds the heat real well. You could not ask for better there. I thought about getting one of those deep V Cajun fryers, but thought I might be back in the same boat as with the Emeril’s. How long have you had yours? A long time I am gathering. So it sounds like we must have got the only three lemons in the batch.
calldoctoday I just did some quick online research and it appears the Emeril deep fryers were made by 2 seperate company’s. By the looks, mine is a Kalorik and T-Fal made some for him also. I not sure if there were others. You may want to check, I saw an entire T-fal heating element and controller for about $ 30 just now while looking into it for you. It may be worth a shot.
-
calldoctoday I just did some quick online research and it appears the Emeril deep fryers were made by 2 seperate company’s. By the looks, mine is a Kalorik and T-Fal made some for him also. I not sure if there were others. You may want to check, I saw an entire T-fal heating element and controller for about $ 30 just now while looking into it for you. It may be worth a shot.
GWG8541 Wow, you really got more information than I did. I always thought ours were the T-Fal models. Although, some of the less expensive parts did not seem to match up. I am going to have to do some research on that again, maybe the prices have gone down (as strange as that is with everything seeming to go up lately). Did you just do a general search or were you looking at a particular site? I think I would always put either the model number or the part number in on ours when I got serious, but it has been quite a while now since it has been probably at least five now since we have just gone back to the cast iron. Thank you for looking, I really appreciate it. I have focus on this work tonight though.
-
GWG8541 Wow, you really got more information than I did. I always thought ours were the T-Fal models. Although, some of the less expensive parts did not seem to match up. I am going to have to do some research on that again, maybe the prices have gone down (as strange as that is with everything seeming to go up lately). Did you just do a general search or were you looking at a particular site? I think I would always put either the model number or the part number in on ours when I got serious, but it has been quite a while now since it has been probably at least five now since we have just gone back to the cast iron. Thank you for looking, I really appreciate it. I have focus on this work tonight though.
calldoctoday my mom used an old aluminum pressure cooker as her deep fry pot for as long as I can remember. She simply dipped items out with a large slotted spoon. It worked great and everything tasted even better. If it didn’t require a deep fry, a good amount of her frying was done in the CI skillet. Simple is definitely more reliable.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register LoginSponsored By:
