Chicago Brat time.
-
Went pretty well.
pr0wlunwoof Would you post a few pictures of the #32 belt drive grinder. Thanks
-
Here is a screen shot from a video I did. This is the front of it.
This is a picture of motor specs.
It has a 3 inch pulley on the motor. I want to change that to a 1 inch, but haven’t been able to find one.
The grinder has a 12 in pulley that comes with a handle for hand cranking. Took that off and run a v-belt from the hardware store.
Use a turn-buckle to tension the belt. And wired a light switch in line.
-
It grinds pretty much as fast as you can put it in. Fastest we have clocked it is about 10lb a minute, but if you expanded the hopper with some type of funnel (which I have seen on youtube) you could probably go faster than that. Only thing I would change is probably slowing it down with a smaller motor pulley, but that would just be to ease my mind as its north of 400RPM if I did my math right. A 1 inch pulley would bring it down to around 150RPM. Probably going to get some more plates/knives for it as that is the only one it has.
I take care when putting it together as to make sure the bearings and everything are running true so their is no metal on metal action.
-
Got what we arent eating tonight all packaged up. Definately room for improvement, but all in a great experience.
-
Here is a screen shot from a video I did. This is the front of it.
This is a picture of motor specs.
It has a 3 inch pulley on the motor. I want to change that to a 1 inch, but haven’t been able to find one.
The grinder has a 12 in pulley that comes with a handle for hand cranking. Took that off and run a v-belt from the hardware store.
Use a turn-buckle to tension the belt. And wired a light switch in line.
pr0wlunwoof Thanks, that’s such a good backup. I wanted a manual grinder just in case power was out, having that as an option is terrific. I have several pulleys and motors, sure I could get one to work. Kill two birds with one purchase.
-
pr0wlunwoof Thanks, that’s such a good backup. I wanted a manual grinder just in case power was out, having that as an option is terrific. I have several pulleys and motors, sure I could get one to work. Kill two birds with one purchase.
Chef
No problem. I think it would be a good backup/secondary for you. For the $120 I got in it im pretty happy. Cleanup isn’t too bad I just take it apart and off the 4 bolts and throw everything in the dish washer. They make a stainless steal version, but i haven’t gone looking for it. Rust doesn’t scare me, but I’m not using it to make a living.
Main issues I have seen is folks not getting everything running true. Its not hard just allot of people don’t pay attention to what their doing. -
Direct from China $139
-
Direct from China $139
pr0wlunwoof What site was that. I found one that had a #32 with pulley for $139 but they wanted $159 to ship it. I just won’t go there.
-
Ali express. I didn’t look at shipping costs. Same shipping cost you found.
-
Ali express. I didn’t look at shipping costs. Same shipping cost you found.
pr0wlunwoof I think at 64 years old, I’ll not wear out a cast iron grinder.
-
Yeah I can’t find one without ridiculous shipping costs.
-
Yeah I can’t find one without ridiculous shipping costs.
pr0wlunwoof Okay, the censor god took out the link, can try the chat or email me, it’s on my profile
-
Turned out great. The mother-in-law said she hasn’t had a good bratwurst in over 8 years. So I guess we are in the clear. Everyone says the new hobby is a
-
pr0wlunwoof Okay, the censor god took out the link, can try the chat or email me, it’s on my profile
Chef I will do some looking after everyone is in bed. Everything I am finding is out of stock.
Its a Sportsman Series Number-32 Cast Iron Meat Grinder with Pulley. No where online has stock.
-
Chef I will do some looking after everyone is in bed. Everything I am finding is out of stock.
Its a Sportsman Series Number-32 Cast Iron Meat Grinder with Pulley. No where online has stock.
pr0wlunwoof Yep, that’s what I’m finding. I guess people are preparing for something more than I ever anticipated. I can only pray that all this concern is for nothing… We’ll know soon
-
Here is a screen shot from a video I did. This is the front of it.
This is a picture of motor specs.
It has a 3 inch pulley on the motor. I want to change that to a 1 inch, but haven’t been able to find one.
The grinder has a 12 in pulley that comes with a handle for hand cranking. Took that off and run a v-belt from the hardware store.
Use a turn-buckle to tension the belt. And wired a light switch in line.
-
pr0wlunwoof Yep, that’s what I’m finding. I guess people are preparing for something more than I ever anticipated. I can only pray that all this concern is for nothing… We’ll know soon
Chef Yeah. I dunno. Stopped watching and reading the “news” and turned off facebook back in June. A whole lot of misinformation and fear mongering. Started doing my own fact checking and devising my own plan based on those facts. Hopefully others have done the same.
-
Chef Yeah. I dunno. Stopped watching and reading the “news” and turned off facebook back in June. A whole lot of misinformation and fear mongering. Started doing my own fact checking and devising my own plan based on those facts. Hopefully others have done the same.
pr0wlunwoof I agree, fact checking is important. Sad, can’s always do it with Google, they tend to give biased hits. Proved that to myself months ago. They promote their agenda. Haven’t really found a search engine to use that just is not biased.
-
pr0wlunwoof Yeah, looking at things outside the main stream is important. Trying to find unbiased sources could drive you crazy. Speaking of plans, they are really important and we’ve hamered it home time and time again on the podcast but having some plan for your meat supply is critical. I was pretty worried about all of this and then we had something happen near us, I laid out a plan with my wife on what we were going to do and slept like a baby that night. I just had to endure her looking at me like I was crazy for a few minutes, small price to pay for some additional security to both ourselves and our food!
Get more help with your processing questions and learn more about processing meat by subscribing to our waltonsinc.com youtube page at https://wltns.link/waltonstv I am a Gorilla, love yourself
-
pr0wlunwoof Yeah, looking at things outside the main stream is important. Trying to find unbiased sources could drive you crazy. Speaking of plans, they are really important and we’ve hamered it home time and time again on the podcast but having some plan for your meat supply is critical. I was pretty worried about all of this and then we had something happen near us, I laid out a plan with my wife on what we were going to do and slept like a baby that night. I just had to endure her looking at me like I was crazy for a few minutes, small price to pay for some additional security to both ourselves and our food!
Jonathon yeah with us being pregnant we had to make allot of plans. We have good friends and family to lean on and haven’t had to yet, but its definately not getting better before it gets worse. Id say we are lucky, but as much as we can we make our own luck. Allot of people don’t understand the basics of home economics, living within your means, and planning for the future. We had good upbringings I guess most aren’t as fortunate.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register LoginSponsored By:
