Chicago Brat time.
-
Yeah I’m all about well made stuff, but I take into account value/cost. I’ve got allot of hobbies and through them all I have very few regrettable purchases.
pr0wlunwoof don’t we all.
-
It has begun. Will only be a 5lb batch as walmart decided that for me on delivery. Everything has been prepped just waiting on my second set of hands to get here.
Boned the butt then sliced and diced and ran through the kitchen aid grinder as the old #32 belt driven grinder seemed like overkill. I remember why I built the #32 the kitchen aid is god awful slow.
-
-
Went pretty well.
pr0wlunwoof Would you post a few pictures of the #32 belt drive grinder. Thanks
-
Here is a screen shot from a video I did. This is the front of it.
This is a picture of motor specs.
It has a 3 inch pulley on the motor. I want to change that to a 1 inch, but haven’t been able to find one.
The grinder has a 12 in pulley that comes with a handle for hand cranking. Took that off and run a v-belt from the hardware store.
Use a turn-buckle to tension the belt. And wired a light switch in line.
-
It grinds pretty much as fast as you can put it in. Fastest we have clocked it is about 10lb a minute, but if you expanded the hopper with some type of funnel (which I have seen on youtube) you could probably go faster than that. Only thing I would change is probably slowing it down with a smaller motor pulley, but that would just be to ease my mind as its north of 400RPM if I did my math right. A 1 inch pulley would bring it down to around 150RPM. Probably going to get some more plates/knives for it as that is the only one it has.
I take care when putting it together as to make sure the bearings and everything are running true so their is no metal on metal action.
-
Got what we arent eating tonight all packaged up. Definately room for improvement, but all in a great experience.
-
Here is a screen shot from a video I did. This is the front of it.
This is a picture of motor specs.
It has a 3 inch pulley on the motor. I want to change that to a 1 inch, but haven’t been able to find one.
The grinder has a 12 in pulley that comes with a handle for hand cranking. Took that off and run a v-belt from the hardware store.
Use a turn-buckle to tension the belt. And wired a light switch in line.
pr0wlunwoof Thanks, that’s such a good backup. I wanted a manual grinder just in case power was out, having that as an option is terrific. I have several pulleys and motors, sure I could get one to work. Kill two birds with one purchase.
-
pr0wlunwoof Thanks, that’s such a good backup. I wanted a manual grinder just in case power was out, having that as an option is terrific. I have several pulleys and motors, sure I could get one to work. Kill two birds with one purchase.
Chef
No problem. I think it would be a good backup/secondary for you. For the $120 I got in it im pretty happy. Cleanup isn’t too bad I just take it apart and off the 4 bolts and throw everything in the dish washer. They make a stainless steal version, but i haven’t gone looking for it. Rust doesn’t scare me, but I’m not using it to make a living.
Main issues I have seen is folks not getting everything running true. Its not hard just allot of people don’t pay attention to what their doing. -
Direct from China $139
-
Direct from China $139
pr0wlunwoof What site was that. I found one that had a #32 with pulley for $139 but they wanted $159 to ship it. I just won’t go there.
-
Ali express. I didn’t look at shipping costs. Same shipping cost you found.
-
Ali express. I didn’t look at shipping costs. Same shipping cost you found.
pr0wlunwoof I think at 64 years old, I’ll not wear out a cast iron grinder.
-
Yeah I can’t find one without ridiculous shipping costs.
-
Yeah I can’t find one without ridiculous shipping costs.
pr0wlunwoof Okay, the censor god took out the link, can try the chat or email me, it’s on my profile
-
Turned out great. The mother-in-law said she hasn’t had a good bratwurst in over 8 years. So I guess we are in the clear. Everyone says the new hobby is a
-
pr0wlunwoof Okay, the censor god took out the link, can try the chat or email me, it’s on my profile
Chef I will do some looking after everyone is in bed. Everything I am finding is out of stock.
Its a Sportsman Series Number-32 Cast Iron Meat Grinder with Pulley. No where online has stock.
-
Chef I will do some looking after everyone is in bed. Everything I am finding is out of stock.
Its a Sportsman Series Number-32 Cast Iron Meat Grinder with Pulley. No where online has stock.
pr0wlunwoof Yep, that’s what I’m finding. I guess people are preparing for something more than I ever anticipated. I can only pray that all this concern is for nothing… We’ll know soon
-
Here is a screen shot from a video I did. This is the front of it.
This is a picture of motor specs.
It has a 3 inch pulley on the motor. I want to change that to a 1 inch, but haven’t been able to find one.
The grinder has a 12 in pulley that comes with a handle for hand cranking. Took that off and run a v-belt from the hardware store.
Use a turn-buckle to tension the belt. And wired a light switch in line.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register LoginSponsored By:
