Meat Stuffer HACK!!!
-
Have you ever been frustrated with the amount of mince left over in the elbow of your stuffer? Well I have.
A week or so ago I posed the question on the board and got some inspiring response. As a result, and based on my background as a physical therapist, I took the suggestion of a “sacrificial bolus” and found a reusable alternative. I did some quick research and ordered some thermoplastic rubber stress ball and low and behold my problem was solved. The b@lls are BPA/phthalate/latex free, are soft enough to conform, but also resilient enough to be squeezed by the stuffer without breaking apart.
I wonder if Austin and Jonathon would consider carrying some and calling them "Dr_Pain’s stuffer b@lls " ROFL!!
Anyway, I made some snack stick this past Sunday and they worked like a charm. I bottomed out the piston, retracted it, pushed the first ball in the mince, bottomed out the piston again and added 2 more (same process). I should add that I did clean them with soap and hot water and sanitized it with a diluted iodoform solution (before and after).
Enjoy the pictures!
Dr_Pain Thanks for the experiment, one of the reasons this sight is so nice, everyone has great information and I learn things I wouldn’t even thought about.
-
ND Mike said in Meat Stuffer HACK!!!:
Dr_Pain is that the 11 lb stuffer?
Mike, that is actually a 7lbs stuffer but I think the 11lbs has the same elbow size. I’m sending you a pic of the diameter measurement. Should be easy to see if that size would work for your application
-
Do they make a cool sound when firing out of there?
HerbcoFood said in Meat Stuffer HACK!!!:
Do they make a cool sound when firing out of there?
I was actually disappointed that there was no guttural sound or farting type noise as they were being compressed but since the horn was still attached there was a “failure to launch”
-
Dr_Pain Thanks for the experiment, one of the reasons this sight is so nice, everyone has great information and I learn things I wouldn’t even thought about.
bocephus said in Meat Stuffer HACK!!!:
Dr_Pain Thanks for the experiment, one of the reasons this sight is so nice, everyone has great information and I learn things I wouldn’t even thought about.
You are welcome buddy! I don’t always have good ideas but sometimes… I have worse ideas LOL!
-
HerbcoFood said in Meat Stuffer HACK!!!:
Do they make a cool sound when firing out of there?
I was actually disappointed that there was no guttural sound or farting type noise as they were being compressed but since the horn was still attached there was a “failure to launch”
Dr_Pain said in Meat Stuffer HACK!!!:
HerbcoFood said in Meat Stuffer HACK!!!:
Do they make a cool sound when firing out of there?
I was actually disappointed that there was no guttural sound or farting type noise as they were being compressed but since the horn was still attached there was a “failure to launch”
boooo
-
ND Mike said in Meat Stuffer HACK!!!:
Dr_Pain is that the 11 lb stuffer?
Mike, that is actually a 7lbs stuffer but I think the 11lbs has the same elbow size. I’m sending you a pic of the diameter measurement. Should be easy to see if that size would work for your application
-
Have you ever been frustrated with the amount of mince left over in the elbow of your stuffer? Well I have.
A week or so ago I posed the question on the board and got some inspiring response. As a result, and based on my background as a physical therapist, I took the suggestion of a “sacrificial bolus” and found a reusable alternative. I did some quick research and ordered some thermoplastic rubber stress ball and low and behold my problem was solved. The b@lls are BPA/phthalate/latex free, are soft enough to conform, but also resilient enough to be squeezed by the stuffer without breaking apart.
I wonder if Austin and Jonathon would consider carrying some and calling them "Dr_Pain’s stuffer b@lls " ROFL!!
Anyway, I made some snack stick this past Sunday and they worked like a charm. I bottomed out the piston, retracted it, pushed the first ball in the mince, bottomed out the piston again and added 2 more (same process). I should add that I did clean them with soap and hot water and sanitized it with a diluted iodoform solution (before and after).
Enjoy the pictures!
Dr_Pain
Great idea! You got a lot of bals trying that!
Had to misspell to avoid the censor. Really! -
Now I’m curious. He had a bunch of basketballs. He had a bunch of basket [censored].
Interesting… Austin? This is not one of the “seven words”. LOL
-
I find it interesting that the concern is left over meat in the throat meanwhile I still have 2 lbs left in the bottom of my stuffer. I use extra washers to put my plunger further down as a hack to reduce it to 1 1/2 lbs. Now what do I gotta do for a hack to get the rest out……thinking a new stuffer is in order.
-
I find it interesting that the concern is left over meat in the throat meanwhile I still have 2 lbs left in the bottom of my stuffer. I use extra washers to put my plunger further down as a hack to reduce it to 1 1/2 lbs. Now what do I gotta do for a hack to get the rest out……thinking a new stuffer is in order.
twilliams That is what it sounds to me too, that is a lot of meat left in the bottom, I would think the plunger should bottom out.
-
I find it interesting that the concern is left over meat in the throat meanwhile I still have 2 lbs left in the bottom of my stuffer. I use extra washers to put my plunger further down as a hack to reduce it to 1 1/2 lbs. Now what do I gotta do for a hack to get the rest out……thinking a new stuffer is in order.
twilliams said in Meat Stuffer HACK!!!:
I find it interesting that the concern is left over meat in the throat meanwhile I still have 2 lbs left in the bottom of my stuffer. I use extra washers to put my plunger further down as a hack to reduce it to 1 1/2 lbs. Now what do I gotta do for a hack to get the rest out……thinking a new stuffer is in order.
I have done the same thing with my stuffer
-
Now I’m curious. He had a bunch of basketballs. He had a bunch of basket [censored].
Interesting… Austin? This is not one of the “seven words”. LOL
PapaSop said in Meat Stuffer HACK!!!:
Now I’m curious. He had a bunch of basketballs. He had a bunch of basket [censored].
Interesting… Austin? This is not one of the “seven words”. LOL
Lol, that was probably in the list of default censored words. Probably fine for us to remove it!
-
Here is a test… Balls should not be censored anymore. We’ll see if it works.
–Austin Walton
VP of Operations at Walton’s & Meatgistics HostShop waltons.com for Everything but the Meat!
Subscribe to WaltonsTV on YouTube (https://wltns.link/waltonstv) -
Austin said in Meat Stuffer HACK!!!:
Here is a test… Balls should not be censored anymore. We’ll see if it works.
LOL. You’re the best!
-
Dr_Pain We actually showed this off at last nights BHA event and just like the last time we did it, it worked like a charm! Its a great trick and I recommend everyone try this!
Get more help with your processing questions and learn more about processing meat by subscribing to our waltonsinc.com youtube page at https://wltns.link/waltonstv I am a Gorilla, love yourself
-
Dr_Pain We actually showed this off at last nights BHA event and just like the last time we did it, it worked like a charm! Its a great trick and I recommend everyone try this!
Jonathon said in Meat Stuffer HACK!!!:
Dr_Pain We actually showed this off at last nights BHA event and just like the last time we did it, it worked like a charm! Its a great trick and I recommend everyone try this!
Thanks Jon! Do you think Walton is gonna start carrying it and call it The Crazy Canuck’s squishy stuffer balls??
-
Jonathon said in Meat Stuffer HACK!!!:
Dr_Pain We actually showed this off at last nights BHA event and just like the last time we did it, it worked like a charm! Its a great trick and I recommend everyone try this!
Thanks Jon! Do you think Walton is gonna start carrying it and call it The Crazy Canuck’s squishy stuffer balls??
Dr_Pain great idea
and great name 
-
Jonathon said in Meat Stuffer HACK!!!:
Dr_Pain We actually showed this off at last nights BHA event and just like the last time we did it, it worked like a charm! Its a great trick and I recommend everyone try this!
Thanks Jon! Do you think Walton is gonna start carrying it and call it The Crazy Canuck’s squishy stuffer balls??
Dr_Pain that has a nice ring to it!
-
Jonathon said in Meat Stuffer HACK!!!:
Dr_Pain We actually showed this off at last nights BHA event and just like the last time we did it, it worked like a charm! Its a great trick and I recommend everyone try this!
Thanks Jon! Do you think Walton is gonna start carrying it and call it The Crazy Canuck’s squishy stuffer balls??
Dr_Pain I am going to have to order a set. That is one of the great things about this sight all the new ideas that come out.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register LoginSponsored By:
