Insulating my smoker
-
Looking for suggestions on how to insulate my Masterbuilt XL propane smoker. I got a needle valve regulator on it and want to smoke when we process near St. Louis and the cold really affects the time. I have a smoke tube so I can give up the smoke part, and I can give up the racks since I’ll hang almost everything. Wanting to insulate it, and can give up the window, since I don’t open it anyway until temp is reached.
-
wayne1952t I’ve never insulated one before but have you considered insulating it from the outside with a smoking blanket instead of going on the inside? Does anyone have any ideas? I wonder if rjsenk has any ideas? I know he has helped one or two other people here.
-
wayne1952t I’ve never insulated one before but have you considered insulating it from the outside with a smoking blanket instead of going on the inside? Does anyone have any ideas? I wonder if rjsenk has any ideas? I know he has helped one or two other people here.
-
Joe Hell Lol the man, the myth the legend…the CIA agent?!
-
Looking for suggestions on how to insulate my Masterbuilt XL propane smoker. I got a needle valve regulator on it and want to smoke when we process near St. Louis and the cold really affects the time. I have a smoke tube so I can give up the smoke part, and I can give up the racks since I’ll hang almost everything. Wanting to insulate it, and can give up the window, since I don’t open it anyway until temp is reached.
I will use my smoker And my grill all winter long here in North Dakota, I use cardboard from appliances/furniture shopping. The Boy Scouts use them too for overnight below zero camp out huts to earn a Zero Hero Badge. Dewey
-
I will use my smoker And my grill all winter long here in North Dakota, I use cardboard from appliances/furniture shopping. The Boy Scouts use them too for overnight below zero camp out huts to earn a Zero Hero Badge. Dewey
deweymeats It does not have to be more than a few inches or more from the unit, just a wind break.
-
I have a round charcoal water smoker with no insulation that I’ve used in the middle of winter in Illinois. I built a plywood box around it with a top just big enough to clear the smoker by a couple inches.The front panel was just propped up for easy access to the smoker. By doing this it creates a warm atmosphere around the smoker from it’s own heat. Worked out great.
-
Getting some pretty good suggestions and ideas. Thanks everyone.
-
Looking for suggestions on how to insulate my Masterbuilt XL propane smoker. I got a needle valve regulator on it and want to smoke when we process near St. Louis and the cold really affects the time. I have a smoke tube so I can give up the smoke part, and I can give up the racks since I’ll hang almost everything. Wanting to insulate it, and can give up the window, since I don’t open it anyway until temp is reached.
wayne1952t
Guess I’m not sure why you want to insulate it. I’m guessing St. Louis can’t be much colder than my locale. Have been using the same smoker for the last 1 1/2 years. Are you looking for a lower temp? I can get mine as low as 125 deg and will hold that temp +/- 2 deg the entire time. I have also used this through out the winter months in Wi with no issues(except for that -14 period, that sucked). I also quit the chip tray and went with the A-Maze-N pellet tube. Smoking does seem to take a little longer in the cold but that’s just more time for cold beverages…
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
