What did everyone cook today?
-
kyle what a nice thing to do, Kyle. And that meal looks like a really great way to remember.
Dave in AZ thanks. I was told they had chicken at their wedding, but I wanted to try and make it a bit fancier than plain chicken. I cant even pronounce that fine looking meal you made, let alone know how to cook it
-
This thing is definitely a beast. Happy I went with the 1050 though. As you guys have said many times better to go as big as you can and you won’t regret it.
Did the initial burn in and seasoning with cheap charcoal briquettes. For the smoke I did alternating layers of lump charcoal and hickory chunks. I did see a video or two someone using full splits in the hopper with just a few briquettes at the bottom to get things going. Look forward to trying that as well. Could be as close to an automated offset as I could get.
Took Six minutes to hit 225 from the time I lit the fire starter. Supposedly it will get to 700° in 15 minutes. But I didn’t push it that hard yet as I was cooking low and slow. But seems like that would have great potential for reverse sear.
Didn’t have my good thermometer in there but based on the control panel it held the temperature surprisingly tight for charcoal. Will have to do a real test when I have more time but seemed to fluctuate only +/-5°.
Comparing it to my neighbors cooks on his Pellet grill I definitely felt like mine had a better smoke flavor (but that could just be the cook
)So far I love this thing. I will keep you guys posted as I get some more cooks on it.
The one problem I had was with the controller LED. Did not reach out to Masterbuilt yet but I’m sure they will make good on it. I will put a picture below to show what I mean. Some of the lines in the LED were dim or went in and out. Luckily looks like swapping out the controller will be easy if they send me a replacement. Also a little glitchy with connection to the app. But I don’t really use that too much anyway.
Can’t get grill pic to go vertical
Huge surface
Hopper with chunks
Glitchy controller
Surg said in What did everyone cook today?:
Comparing it to my neighbors cooks on his Pellet grill I definitely felt like mine had a better smoke flavor
I have to agree, charcoal and wood = better smoke flavor over pellets and or saw dust.
-
RON PARRISH what flavor steak princes did you use. It looks great
kyle I used the sweet rapture.
-
First cook on the MB Gravity Series 1050 (Father’s Day gift)
.
And a little somethin extra on the side
Surg looks like you put it to the test and looks like it passed with flying colors. Congrats
everything looks great. -
Today would have been my parents 52 anniversary if Dad was still with us. So we had my mom out for supper and had parmesan chicken, asparagus with parmesan and butter garlic spice, cheese potatoes and moms favorite, dill pickle wraps
kyle looks good.I bet your mom was pleased. Congrats
-
RON PARRISH nice choice of protein. Looks delicious
GWG8541 Everything was. We had a combination mothers day fathers day thing with the family. My mother lost her battle last thursday.
-
-
This thing is definitely a beast. Happy I went with the 1050 though. As you guys have said many times better to go as big as you can and you won’t regret it.
Did the initial burn in and seasoning with cheap charcoal briquettes. For the smoke I did alternating layers of lump charcoal and hickory chunks. I did see a video or two someone using full splits in the hopper with just a few briquettes at the bottom to get things going. Look forward to trying that as well. Could be as close to an automated offset as I could get.
Took Six minutes to hit 225 from the time I lit the fire starter. Supposedly it will get to 700° in 15 minutes. But I didn’t push it that hard yet as I was cooking low and slow. But seems like that would have great potential for reverse sear.
Didn’t have my good thermometer in there but based on the control panel it held the temperature surprisingly tight for charcoal. Will have to do a real test when I have more time but seemed to fluctuate only +/-5°.
Comparing it to my neighbors cooks on his Pellet grill I definitely felt like mine had a better smoke flavor (but that could just be the cook
)So far I love this thing. I will keep you guys posted as I get some more cooks on it.
The one problem I had was with the controller LED. Did not reach out to Masterbuilt yet but I’m sure they will make good on it. I will put a picture below to show what I mean. Some of the lines in the LED were dim or went in and out. Luckily looks like swapping out the controller will be easy if they send me a replacement. Also a little glitchy with connection to the app. But I don’t really use that too much anyway.
Can’t get grill pic to go vertical
Huge surface
Hopper with chunks
Glitchy controller
Surg nice looking rig. Congrats to you sir
-
GWG8541 Everything was. We had a combination mothers day fathers day thing with the family. My mother lost her battle last thursday.
RON PARRISH so sorry to hear about your mom. My condolences to you and your family. My prayers as well.
-
Sous vide strip cooked to 129°, spinach, mushrooms and onions.
-
Sous vide strip cooked to 129°, spinach, mushrooms and onions.
HerbcoFood man that looks great
-
RON PARRISH so sorry to hear about your mom. My condolences to you and your family. My prayers as well.
cdavis Thank you sir!
-
wdaly
Ribs and chicken drumsticks all done with steak princess seasoning. All was a big success with everyone!!! -
First cook on the MB Gravity Series 1050 (Father’s Day gift)
. And a little somethin extra on the side
Surg That thing looks like it will hold a ton of meat. Those ribs, thighs, and sea treats look amazing.
-
Today would have been my parents 52 anniversary if Dad was still with us. So we had my mom out for supper and had parmesan chicken, asparagus with parmesan and butter garlic spice, cheese potatoes and moms favorite, dill pickle wraps
kyle What a great thing to do for your Mom. Great food and I’m sure she appreciated it.
-
Sous vide strip cooked to 129°, spinach, mushrooms and onions.
-
Today would have been my parents 52 anniversary if Dad was still with us. So we had my mom out for supper and had parmesan chicken, asparagus with parmesan and butter garlic spice, cheese potatoes and moms favorite, dill pickle wraps
-
This thing is definitely a beast. Happy I went with the 1050 though. As you guys have said many times better to go as big as you can and you won’t regret it.
Did the initial burn in and seasoning with cheap charcoal briquettes. For the smoke I did alternating layers of lump charcoal and hickory chunks. I did see a video or two someone using full splits in the hopper with just a few briquettes at the bottom to get things going. Look forward to trying that as well. Could be as close to an automated offset as I could get.
Took Six minutes to hit 225 from the time I lit the fire starter. Supposedly it will get to 700° in 15 minutes. But I didn’t push it that hard yet as I was cooking low and slow. But seems like that would have great potential for reverse sear.
Didn’t have my good thermometer in there but based on the control panel it held the temperature surprisingly tight for charcoal. Will have to do a real test when I have more time but seemed to fluctuate only +/-5°.
Comparing it to my neighbors cooks on his Pellet grill I definitely felt like mine had a better smoke flavor (but that could just be the cook
)So far I love this thing. I will keep you guys posted as I get some more cooks on it.
The one problem I had was with the controller LED. Did not reach out to Masterbuilt yet but I’m sure they will make good on it. I will put a picture below to show what I mean. Some of the lines in the LED were dim or went in and out. Luckily looks like swapping out the controller will be easy if they send me a replacement. Also a little glitchy with connection to the app. But I don’t really use that too much anyway.
Can’t get grill pic to go vertical
Huge surface
Hopper with chunks
Glitchy controller
-
GWG8541 Everything was. We had a combination mothers day fathers day thing with the family. My mother lost her battle last thursday.
RON PARRISH so sorry to hear about your Mom. I know how hard it can be. I hope you hold on to those good times and I will pray that as time passes the hurt from losing her will lessen.
-
Today would have been my parents 52 anniversary if Dad was still with us. So we had my mom out for supper and had parmesan chicken, asparagus with parmesan and butter garlic spice, cheese potatoes and moms favorite, dill pickle wraps
kyle your a good man.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register LoginSponsored By:
