Smoker Upgrade!
-
Retired157 looks like a Spinone. Ours just turned 7 months and she is a busy one and loves the snow.
We have had a German wirehair, a Brittany, cocker spaniel and a basset as hunting dogs. The GW was the hardest working but also the most hard headed, the spaniels the easiest going and the basset the mix of the two former. The Spinone seems to be a blend of all those breeds. Looking forward to this fall hunting and this upcoming spring training.
YooperDog
Love the pictures of your spinone.
Great looking dog in a beautiful snow-setting. -
Retired157 looks like a Spinone. Ours just turned 7 months and she is a busy one and loves the snow.
We have had a German wirehair, a Brittany, cocker spaniel and a basset as hunting dogs. The GW was the hardest working but also the most hard headed, the spaniels the easiest going and the basset the mix of the two former. The Spinone seems to be a blend of all those breeds. Looking forward to this fall hunting and this upcoming spring training.
YooperDog great pictures and beautiful dog
-
Retired157 USPS says Monday, says it is still in Kent as of last night which is about 40 miles from me and a hub. Not sure whether they will put it on a truck or plane. Alaska Air only has one flight out of Seattle to GF everyday and it’s a one day roll by long haul truck. USPS usually goes by air if it is over 600 miles which you are.
Hey John… just checked and the binder is here in GF as we speak! I will have it on Monday. I am getting soooo close to doing this!!!
-
Hey John… just checked and the binder is here in GF as we speak! I will have it on Monday. I am getting soooo close to doing this!!!
Retired157 good luck my friend. You’ll do great
and don’t forget the pictures. -
Hey John… just checked and the binder is here in GF as we speak! I will have it on Monday. I am getting soooo close to doing this!!!
Retired157 When I checked last night it was in Billings, great news. They must have put it on a truck.
-
YooperDog
Love the pictures of your spinone.
Great looking dog in a beautiful snow-setting.processhead cdavis Thank you. She is a ball of energy and a constant explorer.
-
processhead cdavis Thank you. She is a ball of energy and a constant explorer.
YooperDog you can tell she definitely loves the snow
. -
cdavis Get her near a snow bank and she will dig her way in looking for something. Lots of snow here for her dive into.
-
cdavis Get her near a snow bank and she will dig her way in looking for something. Lots of snow here for her dive into.
YooperDog My dogs have all loved the snow, don’t get much here in NM but when we would go to MN for Christmas, they had a blast digging through the snow. The first time we went back home with my first yellow lab my Mom was so worried that it he was going to be too cold. I was doing dishes one evening and he was outside asleep on top of a snowbank, called my Mom over to see him, told her he was either frozen or doing alright in the snow.
-
cdavis Get her near a snow bank and she will dig her way in looking for something. Lots of snow here for her dive into.
YooperDog Here’s mine finding her ball under the snow. Our love it as well, they just go out and lay in it and act like puppies again.
-
YooperDog Here’s mine finding her ball under the snow. Our love it as well, they just go out and lay in it and act like puppies again.
johnsbrewhouse bocephus yeah I think they enjoy their fur coats this time of year, not so much during the summer.
-
Retired157 When I checked last night it was in Billings, great news. They must have put it on a truck.
Just checked now and it’s listed as ‘Out for Delivery’. Our mail usually arrives later afternoon so I think I will spend some time today ‘laying’ things out… organizing. My wife says she’s going to Lewistown today to see her girlfriend for a few days, so it would be a perfect time for me to get this Summer Sausage thing done… and have a beer! : )
I’ll keep you posted but it appears that the ‘time’ has come.
-
YooperDog Here’s mine finding her ball under the snow. Our love it as well, they just go out and lay in it and act like puppies again.
Ok John… as I sit here waiting on the mailman, I’ve been getting things laid out in the garage and running around town a little. Here’s my ‘stuff’ as I prepare for the big day tomorrow.
/Users/Ron/Pictures/Ron’s Photos Library.photoslibrary/resources/renders/6/6287D7D2-FA00-4EC1-B08A-FBAD4832F9B8_1_201_a.jpegJust trying to make sure that everything I will need is out where I can get to it. I have all the grinder parts in the freezer so they’ll be cold. Do I lube them before the freezer trick or after… ?
I’ve got all my meat out and thawing. I’ll watch it as the day goes on and put it in the refrigerator before it completely thaws… trying to keep it frosty.
Got my wood, Hickory, ready for the smoker when the time comes. I’m going to use those ‘disposable’ baking pans for water/humidity for the smoker. Went and got a couple of sponges to aid in the evaporation process; even ‘equipped’ them with two ‘wicks’ each… just thought it might help keeping that ‘upward’ draw. Here’s a pic…
/Users/Ron/Pictures/Ron’s Photos Library.photoslibrary/resources/renders/9/92A45C39-9270-40C0-9E95-EF54C0FD556A_1_201_a.jpegYes; I even made myself a ‘fake’ SS… just trying to get the ‘fit’ right both here in the smoker and also my Sous Vide cooler cooker.
Just about ready to measure/weigh out my spices & additive’s. I have to run back to the store and grab two bags of ice; forgot that as I was out but hey, I did remember the beer!
/Users/Ron/Pictures/Ron’s Photos Library.photoslibrary/resources/renders/B/B83E80A7-B2C2-462A-9255-67FEA443D7DE_1_201_a.jpegIf you think I’m missing anything, speak up now or forever hold your beer!
-
Ok John… as I sit here waiting on the mailman, I’ve been getting things laid out in the garage and running around town a little. Here’s my ‘stuff’ as I prepare for the big day tomorrow.
/Users/Ron/Pictures/Ron’s Photos Library.photoslibrary/resources/renders/6/6287D7D2-FA00-4EC1-B08A-FBAD4832F9B8_1_201_a.jpegJust trying to make sure that everything I will need is out where I can get to it. I have all the grinder parts in the freezer so they’ll be cold. Do I lube them before the freezer trick or after… ?
I’ve got all my meat out and thawing. I’ll watch it as the day goes on and put it in the refrigerator before it completely thaws… trying to keep it frosty.
Got my wood, Hickory, ready for the smoker when the time comes. I’m going to use those ‘disposable’ baking pans for water/humidity for the smoker. Went and got a couple of sponges to aid in the evaporation process; even ‘equipped’ them with two ‘wicks’ each… just thought it might help keeping that ‘upward’ draw. Here’s a pic…
/Users/Ron/Pictures/Ron’s Photos Library.photoslibrary/resources/renders/9/92A45C39-9270-40C0-9E95-EF54C0FD556A_1_201_a.jpegYes; I even made myself a ‘fake’ SS… just trying to get the ‘fit’ right both here in the smoker and also my Sous Vide cooler cooker.
Just about ready to measure/weigh out my spices & additive’s. I have to run back to the store and grab two bags of ice; forgot that as I was out but hey, I did remember the beer!
/Users/Ron/Pictures/Ron’s Photos Library.photoslibrary/resources/renders/B/B83E80A7-B2C2-462A-9255-67FEA443D7DE_1_201_a.jpegIf you think I’m missing anything, speak up now or forever hold your beer!
Retired157 I would lube it just before you put it together for grinding
-
Retired157 I would lube it just before you put it together for grinding
10-4… afterwards it’ll be. I am all caught up now…
Look what I just got!
/Users/Ron/Pictures/Ron’s Photos Library.photoslibrary/resources/renders/8/838AD67B-E6B5-4B1C-A180-5BB86E1A6843_1_201_a.jpegThanks buddy! As soon as I’m done with this beer, I’ll measure out this one last item… Summer Sausage here I come.
-
Ok John… as I sit here waiting on the mailman, I’ve been getting things laid out in the garage and running around town a little. Here’s my ‘stuff’ as I prepare for the big day tomorrow.
/Users/Ron/Pictures/Ron’s Photos Library.photoslibrary/resources/renders/6/6287D7D2-FA00-4EC1-B08A-FBAD4832F9B8_1_201_a.jpegJust trying to make sure that everything I will need is out where I can get to it. I have all the grinder parts in the freezer so they’ll be cold. Do I lube them before the freezer trick or after… ?
I’ve got all my meat out and thawing. I’ll watch it as the day goes on and put it in the refrigerator before it completely thaws… trying to keep it frosty.
Got my wood, Hickory, ready for the smoker when the time comes. I’m going to use those ‘disposable’ baking pans for water/humidity for the smoker. Went and got a couple of sponges to aid in the evaporation process; even ‘equipped’ them with two ‘wicks’ each… just thought it might help keeping that ‘upward’ draw. Here’s a pic…
/Users/Ron/Pictures/Ron’s Photos Library.photoslibrary/resources/renders/9/92A45C39-9270-40C0-9E95-EF54C0FD556A_1_201_a.jpegYes; I even made myself a ‘fake’ SS… just trying to get the ‘fit’ right both here in the smoker and also my Sous Vide cooler cooker.
Just about ready to measure/weigh out my spices & additive’s. I have to run back to the store and grab two bags of ice; forgot that as I was out but hey, I did remember the beer!
/Users/Ron/Pictures/Ron’s Photos Library.photoslibrary/resources/renders/B/B83E80A7-B2C2-462A-9255-67FEA443D7DE_1_201_a.jpegIf you think I’m missing anything, speak up now or forever hold your beer!
Retired157 Dude; you are ready for LAUNCH!
Improvise, Adapt and Overcome! Semper Fi
-
Retired157 Dude; you are ready for LAUNCH!
I’m trying! I hope u r right.
-
Get picks of you using the new toys.
-
Yep… I’ll guess I’ll end this ‘conversation’ tomorrow with some pics of what I made! Nothing like PRESSURE!
-
Time to bag up that binder…
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register LoginSponsored By:
