Great find! I think?!
-
nothing wrong with a good slicer
-
I had another great marketplace find. Picked up this 827a Berkel 12” slicer for 100 bucks. Needs a little TLC but I think it is going to be great. This is my first slicer so cleaning and lubricating it will probably teach me a lot about it. It started right up and belt and motor seem solid. It is missing the slice deflector which I am debating if I even need. Also the tray gets a little stiff as it approaches the blade. It is getting much better after I added some mineral oil to the rod that it slides on. Hope this is OK to do. Could not think of another way to lubricate the bushings. Also there is an oil hole at the end of the rod which I’m not sure what I’m supposed to do with. I may need a new sharpening stone and could use new feet. But for $100 I don’t mind investing a little.
It has a Somewhat oxidized look to it, may be from something they tried to clean it with previously. Wondering if anybody has any tricks to shine it up. Was thinking maybe barkeepers friend but wasn’t sure.
Surg that thing looks like a beast. I think you’ve got a great find there you lucky dog. Congrats to you
-
I had another great marketplace find. Picked up this 827a Berkel 12” slicer for 100 bucks. Needs a little TLC but I think it is going to be great. This is my first slicer so cleaning and lubricating it will probably teach me a lot about it. It started right up and belt and motor seem solid. It is missing the slice deflector which I am debating if I even need. Also the tray gets a little stiff as it approaches the blade. It is getting much better after I added some mineral oil to the rod that it slides on. Hope this is OK to do. Could not think of another way to lubricate the bushings. Also there is an oil hole at the end of the rod which I’m not sure what I’m supposed to do with. I may need a new sharpening stone and could use new feet. But for $100 I don’t mind investing a little.
It has a Somewhat oxidized look to it, may be from something they tried to clean it with previously. Wondering if anybody has any tricks to shine it up. Was thinking maybe barkeepers friend but wasn’t sure.
Surg great find. For that price you could do a lot of repair work and still come out ahead.
-
Nice find for sure
-
I had another great marketplace find. Picked up this 827a Berkel 12” slicer for 100 bucks. Needs a little TLC but I think it is going to be great. This is my first slicer so cleaning and lubricating it will probably teach me a lot about it. It started right up and belt and motor seem solid. It is missing the slice deflector which I am debating if I even need. Also the tray gets a little stiff as it approaches the blade. It is getting much better after I added some mineral oil to the rod that it slides on. Hope this is OK to do. Could not think of another way to lubricate the bushings. Also there is an oil hole at the end of the rod which I’m not sure what I’m supposed to do with. I may need a new sharpening stone and could use new feet. But for $100 I don’t mind investing a little.
It has a Somewhat oxidized look to it, may be from something they tried to clean it with previously. Wondering if anybody has any tricks to shine it up. Was thinking maybe barkeepers friend but wasn’t sure.
Surg That’s called thievery! Great find though. If you see another like that, send it on down.
-
Looks like a good commercial grade slicer. At that price, you made out, man.
-
I had another great marketplace find. Picked up this 827a Berkel 12” slicer for 100 bucks. Needs a little TLC but I think it is going to be great. This is my first slicer so cleaning and lubricating it will probably teach me a lot about it. It started right up and belt and motor seem solid. It is missing the slice deflector which I am debating if I even need. Also the tray gets a little stiff as it approaches the blade. It is getting much better after I added some mineral oil to the rod that it slides on. Hope this is OK to do. Could not think of another way to lubricate the bushings. Also there is an oil hole at the end of the rod which I’m not sure what I’m supposed to do with. I may need a new sharpening stone and could use new feet. But for $100 I don’t mind investing a little.
It has a Somewhat oxidized look to it, may be from something they tried to clean it with previously. Wondering if anybody has any tricks to shine it up. Was thinking maybe barkeepers friend but wasn’t sure.
Surg Surg looks like a good find. A little TLC and you will be up and running.
-
Great find. I’m looking for a good one now too. Hopefully I’ll make a good grab
-
I love and am scared of deli slicers!!!
-
I had another great marketplace find. Picked up this 827a Berkel 12” slicer for 100 bucks. Needs a little TLC but I think it is going to be great. This is my first slicer so cleaning and lubricating it will probably teach me a lot about it. It started right up and belt and motor seem solid. It is missing the slice deflector which I am debating if I even need. Also the tray gets a little stiff as it approaches the blade. It is getting much better after I added some mineral oil to the rod that it slides on. Hope this is OK to do. Could not think of another way to lubricate the bushings. Also there is an oil hole at the end of the rod which I’m not sure what I’m supposed to do with. I may need a new sharpening stone and could use new feet. But for $100 I don’t mind investing a little.
It has a Somewhat oxidized look to it, may be from something they tried to clean it with previously. Wondering if anybody has any tricks to shine it up. Was thinking maybe barkeepers friend but wasn’t sure.
-
Found a bizerba hd33. The guy wants 300 anyone use or have one of them.
-
That seems to be a pretty high end unit. Not familiar with it however.
https://www.nellaonline.com/products/13-manual-gravity-slicer-33hp-g10
-
I had another great marketplace find. Picked up this 827a Berkel 12” slicer for 100 bucks. Needs a little TLC but I think it is going to be great. This is my first slicer so cleaning and lubricating it will probably teach me a lot about it. It started right up and belt and motor seem solid. It is missing the slice deflector which I am debating if I even need. Also the tray gets a little stiff as it approaches the blade. It is getting much better after I added some mineral oil to the rod that it slides on. Hope this is OK to do. Could not think of another way to lubricate the bushings. Also there is an oil hole at the end of the rod which I’m not sure what I’m supposed to do with. I may need a new sharpening stone and could use new feet. But for $100 I don’t mind investing a little.
It has a Somewhat oxidized look to it, may be from something they tried to clean it with previously. Wondering if anybody has any tricks to shine it up. Was thinking maybe barkeepers friend but wasn’t sure.
Surg I spend a lot of time looking for one of these. There was an old Globe slicer that I missed by a half hour. The hunt continues. Great score!!!
-
Surg I spend a lot of time looking for one of these. There was an old Globe slicer that I missed by a half hour. The hunt continues. Great score!!!
ND Mike Yeah I was looking for a while. I’ve seen a few globes in the $500 range. The other day I just woke up and something told me to check and it had posted only a few hours earlier. Luckily it was close to my parents house so I had my dad grab it for me.
“A smooth sea never made a skilled sailor.”
-
ND Mike Yeah I was looking for a while. I’ve seen a few globes in the $500 range. The other day I just woke up and something told me to check and it had posted only a few hours earlier. Luckily it was close to my parents house so I had my dad grab it for me.
Surg I have learned to always trust my gut when I get a feeling!
-
That seems to be a pretty high end unit. Not familiar with it however.
https://www.nellaonline.com/products/13-manual-gravity-slicer-33hp-g10
processhead yeah it looks legit and is in my town. I just dont know if I should grab it. I’m a home guy and my little 25 dollar slicer sucks. I just don’t know if something that big is worth the hassle.
-
processhead yeah it looks legit and is in my town. I just dont know if I should grab it. I’m a home guy and my little 25 dollar slicer sucks. I just don’t know if something that big is worth the hassle.
samspade if it is in your buget you will not regret it
-
processhead yeah it looks legit and is in my town. I just dont know if I should grab it. I’m a home guy and my little 25 dollar slicer sucks. I just don’t know if something that big is worth the hassle.
samspade said in Great find! I think?!:
processhead yeah it looks legit and is in my town. I just dont know if I should grab it. I’m a home guy and my little 25 dollar slicer sucks. I just don’t know if something that big is worth the hassle.
I would think you could resell it if its not to your liking.
-
samspade I say go for it if it’s still available.
-
I cant believe this. I offered the guy 300 for a 5000 slicer. He said ok. Went over to pick it up and it didnt spin the blade but the controls lit up. I’ve got a guy, so I took it. Got it home and saw the carriage was not set to zero. Closed it and everything works. Now to clean sanitize and lubricate. Got to buy a cart cause it weighs 100lbs or more.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register LoginSponsored By:
