Making Summer Sausage with a Bowl Chopper?
-
Pivodog said in Making Summer Sausage with a Bowl Chopper?:
I’ll keep my eyes open for one! Are they all the same drive?
You will want to check the model information on the name plate of your machine and let us know which one you have.
Also, can you post a couple of pictures of your machine’s power drive port? If you can remove the dust cover off the power drive on your chopper and clean off the grease before you take the pictures, we can see what you have.
Your machine most likely uses a #12 Hobart grinder head which has a square drive for the auger and a round, tapered shank for the head.
Here is a picture of the head/ auger from mine that plugs into the power drive.
Another photo shows what the power drive hub looks like viewed from the open end.
The dowel pin on the head holds the head in alignment on the power drive hub. The recess in the grinder head shank aligns with the lock screw on the hub to lock it to the chopper.
-
processhead Mine looks like it has the same dimensions as yours. I’m expecting a couple of slabs of back fat tomorrow. So, it might be a 10lb run of Summer Sausage this weekend.
Pivodog
Do you already have a grinder of some kind you can run the fat and meat through before chopping? -
Yeah, I have a Pro-Cut Grinder, but I’d rather not get it dirty?LOL
What I like about the chopper is that seems to be better at creating a good emulsion/binding.
Pivodog said in Making Summer Sausage with a Bowl Chopper?:
Yeah, I have a Pro-Cut Grinder, but I’d rather not get it dirty?LOL
What I like about the chopper is that seems to be better at creating a good emulsion/binding.
The chopper will get get you a finer emulsion, but you will still want to run everything through the pro-cut coarse and fine plates.
A guy has a like-new #12 Pro-cut for sale on FB market place along with a ton of extra plates, knives and other swag for $500. Wish I needed it. lol
Paul
-
Pivodog said in Making Summer Sausage with a Bowl Chopper?:
Yeah, I have a Pro-Cut Grinder, but I’d rather not get it dirty?LOL
What I like about the chopper is that seems to be better at creating a good emulsion/binding.
The chopper will get get you a finer emulsion, but you will still want to run everything through the pro-cut coarse and fine plates.
A guy has a like-new #12 Pro-cut for sale on FB market place along with a ton of extra plates, knives and other swag for $500. Wish I needed it. lol
-
processhead Do you have a link to the #12 Pro-Cut sale? I’m curious what he has for sale. I probably won’t be able to view it since I don’t have a FB account, but will try.
Pivodog said in Making Summer Sausage with a Bowl Chopper?:
processhead Do you have a link to the #12 Pro-Cut sale? I’m curious what he has for sale. I probably won’t be able to view it since I don’t have a FB account, but will try.
Sure. Just to clarify, his grinder is badged with a Tor-Rey label. As I understand it, they are now marketed as Pro-cut.
Paul
-
Pivodog said in Making Summer Sausage with a Bowl Chopper?:
processhead Do you have a link to the #12 Pro-Cut sale? I’m curious what he has for sale. I probably won’t be able to view it since I don’t have a FB account, but will try.
Sure. Just to clarify, his grinder is badged with a Tor-Rey label. As I understand it, they are now marketed as Pro-cut.
processhead that’s correct! Torey is ProCut. Mine is a ProCut
-
Hope it tastes as good as it looks.
Paul
-
Hope it tastes as good as it looks.
processhead Yes, it does!
-
smokinbubba Yeah we could do something on that for a livestream, I’ve got one in our commercial test kitchen and it seems like people are getting more interested in them.
-
processhead I paid $1100.00 for it from a local used restaurant equipment store. It was pretty dirty when I got it. I ended up taking apart the bottom plate to remove all of the old crap and polished it up. It looks really nice now. I also replaced the blades and locking collar and nut. I’ve been mainly making frankfurters with it along with a loaf of Leberkasse.
Pivodog What did you use to polish your chopper up? It looks really good.
-
When I got the bowl chopper, I took it apart and scrubbed it down with simple green to get rid of the old food and grease stuck on to it and then used a little bit of aluminum polish to shine it up. After that, I washed it down and sanitized it with Clorox and water.
-
I think some of these machines with the cast aluminum housings probably were factory polished with a fine wire wheel buffer and then clear coated to seal the surface. I know on mine, there are areas where it looks like the coating has worn through from repeated cleaning and general wear and tear.
-
This post is deleted!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register LoginSponsored By:
