Sous vide snack sticks
-
Just did trail bologna in the SV. Man what a difference! Before, I stayed away from 2.5”x24 casings because of the loooong cook. My last batch was smoked to 130 then finished in SV until 160deg. Only took an hour!! I will never do sausage again with smokehouse only. Oh, I didn’t bag. Straight into the bath. Perfect.
If the women don’t find you handsome, they should at least find you handy - Red Green
-
Just did trail bologna in the SV. Man what a difference! Before, I stayed away from 2.5”x24 casings because of the loooong cook. My last batch was smoked to 130 then finished in SV until 160deg. Only took an hour!! I will never do sausage again with smokehouse only. Oh, I didn’t bag. Straight into the bath. Perfect.
smokinbubba do you lose any flavor in the water? For some reason in my mind, I think how you boil other things to make stock
-
kyle I fought back against this for a long time because of that but you’re going to keep your water temp at 177 or around there so I don’t know if that makes a difference or what but it REALLY doesn’t reduce either the smoke or seasoning flavor as long as you let it smoke to 130 or so.
Get more help with your processing questions and learn more about processing meat by subscribing to our waltonsinc.com youtube page at https://wltns.link/waltonstv I am a Gorilla, love yourself
-
kyle I fought back against this for a long time because of that but you’re going to keep your water temp at 177 or around there so I don’t know if that makes a difference or what but it REALLY doesn’t reduce either the smoke or seasoning flavor as long as you let it smoke to 130 or so.
Jonathon thanks. So the one you have on sale for $75, would that be a good place to start, or would I be better off with the more expensive one? I hate to spend a lot on something I don’t understand. I did go back and watch your videos on this again. I know PapaSop started doing this. what one does he have?
hey vegetarians, my food poops on your food!
-
Jonathon thanks. So the one you have on sale for $75, would that be a good place to start, or would I be better off with the more expensive one? I hate to spend a lot on something I don’t understand. I did go back and watch your videos on this again. I know PapaSop started doing this. what one does he have?
kyle I’m not PapaSop but I will weigh in that I have used a unit very similar to the Weston on sale and for home use it has worked great for 2 yrs
Also I highly recommend adapting an insulated cooler for your processing vessel
I cut a snug fitting hole in the lid of a Coleman 20 can party stacker and am very happy with itGive a man a fish and he eats for a day
Teach a man to fish and he drinks beer for a lifetime -
kyle I’m not PapaSop but I will weigh in that I have used a unit very similar to the Weston on sale and for home use it has worked great for 2 yrs
Also I highly recommend adapting an insulated cooler for your processing vessel
I cut a snug fitting hole in the lid of a Coleman 20 can party stacker and am very happy with itglen thank you for your response. Do you put your meat in bags when finishing in water? I have been making sausage for many years, but this sous vide thing is all new to me. just want to learn a bit before investing in another “tool”
-
kyle I’m not PapaSop but I will weigh in that I have used a unit very similar to the Weston on sale and for home use it has worked great for 2 yrs
Also I highly recommend adapting an insulated cooler for your processing vessel
I cut a snug fitting hole in the lid of a Coleman 20 can party stacker and am very happy with itglen The Weston unit is really a good unit, it has a slight learning curve with the digital controls, but they are fairly easy to learn. The unit likes to default to certain things is what I found. You can’t go wrong with the price and quality of the Weston unit.
-
glen thank you for your response. Do you put your meat in bags when finishing in water? I have been making sausage for many years, but this sous vide thing is all new to me. just want to learn a bit before investing in another “tool”
kyle I vacuum bag but many here swear by "naked " Which I haven’t tried
I generally remove the product after short a heavy smoke then use the graduated step up heat method in the sous vide.
Also remember the direct heat conductivity of souse vide heats the internals relatively quickly and in my humble opinion at temps higher than 160 you can quickly over heat the product if not careful.
Monitor internals with your thermometer.
Don’t be intimidated, it’s much easier to learn than smokingThere are souse vide diameter/heat/time/pasteurization charts on line that are very helpful.
Kind of hard to find and it just occurred to me to print them out next time I need them LOLGive a man a fish and he eats for a day
Teach a man to fish and he drinks beer for a lifetime -
No bags are necessary
-
kyle I’m not PapaSop but I will weigh in that I have used a unit very similar to the Weston on sale and for home use it has worked great for 2 yrs
Also I highly recommend adapting an insulated cooler for your processing vessel
I cut a snug fitting hole in the lid of a Coleman 20 can party stacker and am very happy with itglen I’d like to see a picture of that if it’s not too much trouble. Thanks
-
kyle I vacuum bag but many here swear by "naked " Which I haven’t tried
I generally remove the product after short a heavy smoke then use the graduated step up heat method in the sous vide.
Also remember the direct heat conductivity of souse vide heats the internals relatively quickly and in my humble opinion at temps higher than 160 you can quickly over heat the product if not careful.
Monitor internals with your thermometer.
Don’t be intimidated, it’s much easier to learn than smokingThere are souse vide diameter/heat/time/pasteurization charts on line that are very helpful.
Kind of hard to find and it just occurred to me to print them out next time I need them LOLglen I was asking for a picture of the cooler setup you use.
-
thanks to all for your input.
-
I used a PVC slip connector to make the hole solid and glued it in with expanding foam
The black marks are from the drawing used to saw the hole, learned later they were permanent!
If you are lucky you may find a hole saw the right size for yoursGive a man a fish and he eats for a day
Teach a man to fish and he drinks beer for a lifetime -
I used a PVC slip connector to make the hole solid and glued it in with expanding foam
The black marks are from the drawing used to saw the hole, learned later they were permanent!
If you are lucky you may find a hole saw the right size for yoursglen
That is perfect. I got to do it now too. -
-
Inside is 11"x8.5"x 13.5" deep
It holds the heat so well I could have gone bigger but it is just the right size for my needsGive a man a fish and he eats for a day
Teach a man to fish and he drinks beer for a lifetime -
Inside is 11"x8.5"x 13.5" deep
It holds the heat so well I could have gone bigger but it is just the right size for my needsglen Thanks for the pictures. I see this in near future. Awesome
-
I used a PVC slip connector to make the hole solid and glued it in with expanding foam
The black marks are from the drawing used to saw the hole, learned later they were permanent!
If you are lucky you may find a hole saw the right size for yoursglen
Great idea. -
Jonathon thanks. So the one you have on sale for $75, would that be a good place to start, or would I be better off with the more expensive one? I hate to spend a lot on something I don’t understand. I did go back and watch your videos on this again. I know PapaSop started doing this. what one does he have?
kyle
A couple pics. May have some more if I can find them. -
I use a electric roaster works great get my water to 160-165 while meat is in the smoker pull it when it’s 140° into the water no vac bags I do everything that way now saves so much time I can get 12# snack sticks or 4 summer sausage logs 2.9x20
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register LoginSponsored By:
