Base diameter of Waltons 13MM stuffing tube.
-
I have a 15 # Hakka stuffer and want to use the 13mm Waltons tube to make 19mm snack sticks. The Hakka tube has a 2” OD at the base and just wanted to make sure the Waltons one was the same size.
chippewa see if you can find someone with this tube and see if they can take a dial calipers and measure the outside diameter. Mine is 12.7mm and the 19mm casings barely fit on it. I need to cut the full length into thirds in order to put them on.
-
I have the Walton’s 11# stuffer and all the tubes bases are the same diameter and measured 2".
-
I have the Walton’s 11# stuffer and all the tubes bases are the same diameter and measured 2".
-
I have a 15 # Hakka stuffer and want to use the 13mm Waltons tube to make 19mm snack sticks. The Hakka tube has a 2” OD at the base and just wanted to make sure the Waltons one was the same size.
chippewa I have Hakka 15# and the 13mm tube works well with it. I mainly do 21mm stick using it.
-
I have the Walton’s 11# stuffer and all the tubes bases are the same diameter and measured 2".
mrobisr can you confirm these are 2", and not 2-1/8? That is, 51mm and not 53? I have a Meat! Stuffer with 51mm bases, they supply no stainless tubes, and I haven’t found any actual 2in. I had to buy the 53mm and grind down to fit… would LOVE to find actual 2in base tubes!
Thx -
mrobisr can you confirm these are 2", and not 2-1/8? That is, 51mm and not 53? I have a Meat! Stuffer with 51mm bases, they supply no stainless tubes, and I haven’t found any actual 2in. I had to buy the 53mm and grind down to fit… would LOVE to find actual 2in base tubes!
ThxDave in AZ Sorry my caliper died and have another one ordered, but until then here is a pic with tape measure.
-
Dave in AZ Sorry my caliper died and have another one ordered, but until then here is a pic with tape measure.
mrobisr sweet, thx! Great to know, I need to get some stainless tubes on order for all sizes.
-
mrobisr sweet, thx! Great to know, I need to get some stainless tubes on order for all sizes.
-
mrobisr sweet, thx! Great to know, I need to get some stainless tubes on order for all sizes.
Dave in AZ Sorry I misled you, but as you can see they are indeed 53mm.
-
Dave in AZ Sorry I misled you, but as you can see they are indeed 53mm.
mrobisr no worries, I have 3 or 4 on order for the sizes I need, that had a nice solid base f l a n g e wide enough for me to grind.
Went with 10mm for 16 to 18mm casings
12mm for 19mm casings,
12.7mm i.e 0.5in for 21mm casings,
and 19mm I think. Maybe 1 is a real 2in base, rest will be ground.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register LoginSponsored By:
