I have a 15 # Hakka stuffer and want to use the 13mm Waltons tube to make 19mm snack sticks. The Hakka tube has a 2” OD at the base and just wanted to make sure the Waltons one was the same size.

]]>https://waltonsdev.nodebb.com/topic/4771/base-diameter-of-waltons-13mm-stuffing-tubeRSS for NodeFri, 11 Sep 2026 00:42:23 GMTThu, 16 Dec 2021 21:59:29 GMT60mrobisr no worries, I have 3 or 4 on order for the sizes I need, that had a nice solid base f l a n g e wide enough for me to grind.
Went with 10mm for 16 to 18mm casings
12mm for 19mm casings,
12.7mm i.e 0.5in for 21mm casings,
and 19mm I think. Maybe 1 is a real 2in base, rest will be ground.

]]>https://waltonsdev.nodebb.com/post/73938https://waltonsdev.nodebb.com/post/73938Fri, 25 Mar 2022 07:00:19 GMTDave in AZ Sorry I misled you, but as you can see they are indeed 53mm.

]]>https://waltonsdev.nodebb.com/post/73902https://waltonsdev.nodebb.com/post/73902Fri, 25 Mar 2022 00:35:16 GMTDave in AZ

]]>https://waltonsdev.nodebb.com/post/73901https://waltonsdev.nodebb.com/post/73901Fri, 25 Mar 2022 00:33:38 GMTmrobisr sweet, thx! Great to know, I need to get some stainless tubes on order for all sizes.

]]>https://waltonsdev.nodebb.com/post/73491https://waltonsdev.nodebb.com/post/73491Mon, 21 Mar 2022 01:42:31 GMTDave in AZ Sorry my caliper died and have another one ordered, but until then here is a pic with tape measure.

]]>https://waltonsdev.nodebb.com/post/73474https://waltonsdev.nodebb.com/post/73474Mon, 21 Mar 2022 00:31:06 GMTmrobisr can you confirm these are 2", and not 2-1/8? That is, 51mm and not 53? I have a Meat! Stuffer with 51mm bases, they supply no stainless tubes, and I haven’t found any actual 2in. I had to buy the 53mm and grind down to fit… would LOVE to find actual 2in base tubes!
Thx

]]>https://waltonsdev.nodebb.com/post/73378https://waltonsdev.nodebb.com/post/73378Sun, 20 Mar 2022 08:50:23 GMTchippewa I have Hakka 15# and the 13mm tube works well with it. I mainly do 21mm stick using it.

]]>https://waltonsdev.nodebb.com/post/62063https://waltonsdev.nodebb.com/post/62063Sat, 18 Dec 2021 13:18:05 GMTmrobisr thank you so much. I placed the order for it.

]]>https://waltonsdev.nodebb.com/post/61852https://waltonsdev.nodebb.com/post/61852Fri, 17 Dec 2021 11:41:18 GMTI have the Walton’s 11# stuffer and all the tubes bases are the same diameter and measured 2".

]]>https://waltonsdev.nodebb.com/post/61817https://waltonsdev.nodebb.com/post/61817Fri, 17 Dec 2021 02:58:00 GMTI have standard dial calipers Trying to find the best balance of stuff ability and fitting on the tube. My Hakka tubes are way to small and just to big.

]]>https://waltonsdev.nodebb.com/post/61777https://waltonsdev.nodebb.com/post/61777Fri, 17 Dec 2021 00:13:59 GMTchippewa see if you can find someone with this tube and see if they can take a dial calipers and measure the outside diameter. Mine is 12.7mm and the 19mm casings barely fit on it. I need to cut the full length into thirds in order to put them on.

]]>https://waltonsdev.nodebb.com/post/61771https://waltonsdev.nodebb.com/post/61771Thu, 16 Dec 2021 23:10:56 GMT