How To Make Homemade Snack Sticks
-
fourgonefishn I personally would not do snack sticks on a dehydrator. That doesn’t mean it cannot be done, but I think you will end up with a much better product by using a smoker. If you don’t have a smoker, then I’d use an oven, and dehydrator would be my last choice. A dehydrator just doesn’t have a high enough temperature to completely cook meat snacks. You could start some of the lower temps of the cook cycle with a dehydrator, but finishing in a smoker or oven would be ideal.
Austin
Hey, I’m new here so not even sure if this is the right way to post a question… but I’m looking to make pepperoni snack sticks and the article said it could be done without a casing…I have a jerky shooter with a snack stick attachment but do not have a smoker so would need to do this in the oven. Do you have a step by step recipe on how to accomplish this using venison meat? Thanks!! -
Austin
Hey, I’m new here so not even sure if this is the right way to post a question… but I’m looking to make pepperoni snack sticks and the article said it could be done without a casing…I have a jerky shooter with a snack stick attachment but do not have a smoker so would need to do this in the oven. Do you have a step by step recipe on how to accomplish this using venison meat? Thanks!!lucius
If you want to use an oven, check out this post here for some helpful tips:
https://meatgistics.waltonsinc.com/topic/1463/meat-processing-equipment-208-low-temp-ovenFor making a skinless snack stick, you can follow the same beginning process. Same ingredients, grind, mix, etc. When you stuff, you are just using the jerky shooter instead of a stuffer, and no casing. So, you want to stuff the sticks directly onto a cooking rack, or pan, etc. that you can place in the oven. To get the oven to stick to the temperatures you will want to try to hit in the cook cycle, read the article above, but you will also have to experiment a bit with your oven to see how you can make it work best in your case. They key is a low starting temp with a gradual increase. Starting the cooking process with a higher heat will end up with a less than desirable product, but at least still edible as long as you cook to a 160 internal temp.
We don’t have any other full write-ups using a jerky shooter. Just try to follow the info in the recipe here as closely as you can, or also read through the Meatgistics University article here: https://meatgistics.waltonsinc.com/topic/1463/meat-processing-equipment-208-low-temp-oven and when it comes to cooking, trying to follow the same cook cycle as you would on a smoker, but read the article about cooking in an oven above.
-
Hey guys, I’m the new kid in the neighborhood and have only made a couple of posts on this forum. I have read extensively all of the post concerning prepping homemade snack sticks and I’'m ready to try my hand. I know I’ll make mistakes but I learn by doing. I’m as familiar as I can be with your on line processes and procedures, and you have done well in your presentations.
OK, Back to me and my problems. Hardware ??? 1. I have in-house a medium size household food grinder that I plan on trying?? to use. 2. I have a Hobart commercial stand mixer, 3 speed, 1/3 hp pulling 8.2 amps. I plan to buy the 16 lb. Walton stuffier. I can’t justify the Walton smoker at this time. Help needed on a reasonably priced and quality SS smoker. Thank You Tommy -
Hey guys, I’m the new kid in the neighborhood and have only made a couple of posts on this forum. I have read extensively all of the post concerning prepping homemade snack sticks and I’'m ready to try my hand. I know I’ll make mistakes but I learn by doing. I’m as familiar as I can be with your on line processes and procedures, and you have done well in your presentations.
OK, Back to me and my problems. Hardware ??? 1. I have in-house a medium size household food grinder that I plan on trying?? to use. 2. I have a Hobart commercial stand mixer, 3 speed, 1/3 hp pulling 8.2 amps. I plan to buy the 16 lb. Walton stuffier. I can’t justify the Walton smoker at this time. Help needed on a reasonably priced and quality SS smoker. Thank You TommyOde -Tom The Masterbuilt 40 models are good bang for the buck and Pit Boss 5 series vertical seems like a good option. If their smoker is anything like the grill I bought recently it should perform well. Both companies also have good customer support should you need it.
-
Ode -Tom Another option would be a smoker/pellet grill combo like the GMG, Yoder (might be a little pricey) or something like that? More bang for your buck and while not necessarily ideal for smoking snack sticks it 100% can be done and it gives you more use. I personally use only my pellet grill/smokerat home now. Though, admittedly when I do snack sticks or something I have either the PK 100 or the big commercial smoker here that I can use.
-
Hi Guys, I’m still in the hunt for a affordable smoker that will fit into wallet. You folks are the best at follow up. Thanks to all of you. I do have an idea and a direction for my temporary smoker. Will investigate further tomorrow. My best regards Tommy
-
problems with hydration in making snack sticks using excalibur maple-bacon mix. I’m working with aged Akaushi beef. age can be up to 60 to 70 days. I’m using 16mm smoked casings. in the directions for the mix no water is added. the first ingredient in the mix is brown sugar. Sugar is hygroscopic I added water to loosen (1# H2O/25# protein) it a bit and to make up for the dehydration during the aging. After cooking the next day the water leached out and the flavors were very weak. The next batch i made without water it set up like cement. I had to add some water to loosen it (to stuff). My electric stuffers won’t handle the load. I used my cured sausage stuffer (it has gears on it like a 59 ford 9 inch rear end, it is a beast) it did the job but it was a workout. The standard summer sausage mix i use calls for 3#of water per 25# of meat. It’s not excalibur brand and it works great. I know i have an issue with the age, and casing size. But i work as the butcher for a shop that raises the Beef. So it’s the product i use. I have 30 years experience in charcuterie and have always used my own seasonings I mixed myself. The water i added will effect the PH level and shy of doing an emulsification and with the marbling of the meat I think that will be a lost cause. I’m lost here. Any suggestions? Thanks
-
problems with hydration in making snack sticks using excalibur maple-bacon mix. I’m working with aged Akaushi beef. age can be up to 60 to 70 days. I’m using 16mm smoked casings. in the directions for the mix no water is added. the first ingredient in the mix is brown sugar. Sugar is hygroscopic I added water to loosen (1# H2O/25# protein) it a bit and to make up for the dehydration during the aging. After cooking the next day the water leached out and the flavors were very weak. The next batch i made without water it set up like cement. I had to add some water to loosen it (to stuff). My electric stuffers won’t handle the load. I used my cured sausage stuffer (it has gears on it like a 59 ford 9 inch rear end, it is a beast) it did the job but it was a workout. The standard summer sausage mix i use calls for 3#of water per 25# of meat. It’s not excalibur brand and it works great. I know i have an issue with the age, and casing size. But i work as the butcher for a shop that raises the Beef. So it’s the product i use. I have 30 years experience in charcuterie and have always used my own seasonings I mixed myself. The water i added will effect the PH level and shy of doing an emulsification and with the marbling of the meat I think that will be a lost cause. I’m lost here. Any suggestions? Thanks
-
toby-wall I usually don’t smoke for the first hour as smoke won’t adhere then anyway. I then usually leave it on the rest of the time as the smoke from the wood chips usually burns out of my pan in about 2 hours which is as long as I want to apply smoke anyway. If you are working with a commercial smoker where you can constantly pump in smoke then I would say do it from 140° until you jump the temp to 175°.
Some people like a lighter smoke and some like a heavier smoke but I usually recommend changing the type of smoke you are using for that instead of the amount of smoke. For example I tend to like a light smoke on things like chicken so I use Pecan or Apple which have a little lighter smoke flavor than Mesquite or Hickory.
-
Tomg Get a good probe thermometer that will let you measure ambient temps accurately. The Grill Eye Pro Plus is what we have been using, (the recent firmware update allows you to connect through wifi more consistently and from “anywhere”) and then experiment with propping the lid.
We’ve done this recently with our oven and were able to stabilize the top rack at almost exactly 120°. We didnt have to prop the door open too much either, just a little bit to let the heat escape was all that was required.
So, prop the lid with your ambient temp thermometer and move it around a few places to find hot/cold spots. After the 125° phase you can either try to get to 140° by increasing the temp or closing the lid more OR go right to 150°, the 10° difference isn’t going to make or break the snack stick though if it were me I would try for the 140°.
Get more help with your processing questions and learn more about processing meat by subscribing to our waltonsinc.com youtube page at https://wltns.link/waltonstv I am a Gorilla, love yourself
-
Tomg Get a good probe thermometer that will let you measure ambient temps accurately. The Grill Eye Pro Plus is what we have been using, (the recent firmware update allows you to connect through wifi more consistently and from “anywhere”) and then experiment with propping the lid.
We’ve done this recently with our oven and were able to stabilize the top rack at almost exactly 120°. We didnt have to prop the door open too much either, just a little bit to let the heat escape was all that was required.
So, prop the lid with your ambient temp thermometer and move it around a few places to find hot/cold spots. After the 125° phase you can either try to get to 140° by increasing the temp or closing the lid more OR go right to 150°, the 10° difference isn’t going to make or break the snack stick though if it were me I would try for the 140°.
Jonathon
Speaking of hot and cold spots. Never realized how much outside air temp comes into play until this last snack stick smoke. Being that I use LP and drawing air through there was a wide variance in temps. My smoker is thermostatically controlled. Early morning outside temp was 60 deg. No problem getting down to 122 for drying. Three hours later when the sun came out and the temps rose, had to keep adjusting it down because of temp spikes.The older MB 30 I had to prop lower door open even on lowest setting. The wind also comes into play.
Wow…This is fun stuff!
-
PapaSop Outside temp and air flow sometimes absolutely comes into play! With a well-insulated smoker (Parksider is going to appreciate his PK100 in the cold cold upstate NY winters) it’s not as big of a deal but it certainly still comes into play!
These are the things we have to deal with when home processing, and when you take all of that into account and realize we are making a product at least 90% as good as a commercial processor it’s pretty amazing!
-
Tomg Get a good probe thermometer that will let you measure ambient temps accurately. The Grill Eye Pro Plus is what we have been using, (the recent firmware update allows you to connect through wifi more consistently and from “anywhere”) and then experiment with propping the lid.
We’ve done this recently with our oven and were able to stabilize the top rack at almost exactly 120°. We didnt have to prop the door open too much either, just a little bit to let the heat escape was all that was required.
So, prop the lid with your ambient temp thermometer and move it around a few places to find hot/cold spots. After the 125° phase you can either try to get to 140° by increasing the temp or closing the lid more OR go right to 150°, the 10° difference isn’t going to make or break the snack stick though if it were me I would try for the 140°.
-
Hi Guys, tried my 1st SS. Made a 1/4 batch (6.25 lbs.) Willies and followed all the directions and the correct ratios. 4 my taste buds a little too spicy for me. Salt and heat is OK. Where or what do I change in the recipe to cut the spices a bit? Stay with me, I’ma learning. Tommy
-
Ode -Tom First thing I would try is using more meat per amount of seasoning. So, if you were going to use an entire bag that makes 25 lb, try using 30 lb of meat top distribute the seasoning amongst more meat. It is going to take some testing to get exactly what you want but that’s generally the best way to tone down a seasoning.
-
Fblemler I’d recommend taking an already sweet blend like BBQ Snack stick or Honey BBQ and then adding sugar as opposed to trying t create your own. It’s difficult to get the correct ratio, especially for salt content when making a seasoning mix at home.
You will have to play around with how much sugar to add per lb and it might change if you were to switch between seasonings.
Get more help with your processing questions and learn more about processing meat by subscribing to our waltonsinc.com youtube page at https://wltns.link/waltonstv I am a Gorilla, love yourself
-
Fblemler I’d recommend taking an already sweet blend like BBQ Snack stick or Honey BBQ and then adding sugar as opposed to trying t create your own. It’s difficult to get the correct ratio, especially for salt content when making a seasoning mix at home.
You will have to play around with how much sugar to add per lb and it might change if you were to switch between seasonings.
Jonathon Instead of the sugar you have at home couldn’t you use Dextrose to add some sweetness? That’s what I do when making Sweet Italian, I use the Mild Italian seasoning and add Dextrose to it and it works out great, in my opinion anyway. Just wondering if it makes a difference on the source of sweetener you use. I know Dextrose is just a simple sugar that is similar to the sugar most people have at home.
-
AdamCA Actually a lot of people use dextrose instead of sugar in making sausage and it has about 75% the sweetness of sugar so if you switch back and forth be sure to remember that. It is often used as a fermentation aid though.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register LoginSponsored By:
