How To Make Homemade Snack Sticks
-
Joe Hell I have a Master Built 40 smoker. After we started smoking at 175F, we smoked the sticks for another 6 hours and only got the internal temperature to 142F. Tried several thermometer, all were within a couple degrees
doug7777 I also have the MB40 and have had one hell of a time trying to get to temp in a reasonable amount of time. They are well insulated and always hold the desired temp within a few degrees so I’m not sure what the issue is. I have also used multiple thermometers and even an oven thermometer and it always checks out. There is enough humidity that it drips constantly down the front glass panel. My previous MB30’s were much faster. I could generally guess the time/temp off the top of my head and hit my marks within 20 minutes. Something is amiss with the 40.
…I will often use an additional drip tray. According to the manual you should not be adding foil to any of the racks for a similar purpose as this may reduce proper airflow. Perhaps that is my issue?
-
I have really been struggling with making snack sticks, with several failed attempts to the point I’m almost ready to give up.
My issue isn’t flavor, its look and texture. I cannot get that tight, lightly wrinkled look of a snack stick. My meat just doesn’t seem to bind to the casing like it should. The casing always ends up kind of loose, and when you bite into it or try and break a piece in half, the casing and meat separate which is pretty unappetizing.
I am using wild game meat, and I have been experimenting with fat ratios, some batches I know I have done too lean.
I haven’t been adding the protein binder, or citric acid (I am not sure why, not reading the recipe correct I guess) but this next batch I plan to use it and see if that helps, if I fail again though I’m ready to throw in the towel, its getting frustrating so I’d love some help and input. Snack sticks are a great way to eat up ground wild game but it sure is kicking my butt so far.
weatherbow21 I agree with Jonathon of several points. I have been making snack sticks and summer sausage for years and I have scrapped my fair share of batches. There is certainly a difference between wild game and beef or pork from the store. My advice on this, buy a 10lb “log” of 80/20 from Sam’s. This takes out the grinding and having to mix in the right amount of fat. I have made several successful batches this way. BE PATIENT! The more meat you have in the smoker, the longer it is going to take, however, you will find that your temps will fluctuate less. If you get impatient and crank up the heat, you increase your chances of “fatting out”. Been there, done that.
You don’t have to put the entire batch in the smoker at one time as long as you are not using citric acid. Put in a few pounds, follow the temp settings in the recipe, and you will likely have good results in 4-5 hours max. I never set my smokers above 170, but I may try since I am seeing 175 a lot in the Walton’s recipes.
For a binder, I always use soy protein, but the type of binder that you use is based on your preference. I never make a batch without it.
I also document everything from start to finish. I find this helps me to remember not to leave ingredients out of my recipe. It sucks when you get done stuffing and then find your bag of cheese still sitting on the counter.
I document my temp settings, time of day, internal temp, smoke on, smoke off, etc. and I do this with every batch I make. You can then record your results, flavor, texture, presentation. I often go back through my notes just skimming results to see what worked and what didn’t, especially if I am trying a new recipe. If you are fairly new to sausage making and you are not busting casings during the stuffing process, you might not be packing them tight enough. You definitely do not want to under stuff. You will get unsightly fat deposits between the meat and the casing. Don’t give up! -
Joe Hell I have a Master Built 40 smoker. After we started smoking at 175F, we smoked the sticks for another 6 hours and only got the internal temperature to 142F. Tried several thermometer, all were within a couple degrees
doug7777 142 degrees is a stalling point where the fat starts to render. I used to get very impatient and start cranking up the heat to get the INT to go up. That usually results in burning all the fat out of the snack sticks. Be patient. The temp will eventually start to rise again. Once it does, it will continue to do so at a steady pace. I have had snack sticks in the smoker for 24 hours or better due to having 25lbs hanging at one time. I have also had 4-5 lbs at a time in the smoker only take 4-5 hours total.
-
Made my 1st batch of Snack Sticks Following this excellent tutorial. I used 100% Wagyu Brisket Trimmings, Dehydrated Jalapeno, & Cheddar Cheese, & Willies Seasoning. Can’t wait to make some more, and try some other flavor combinations.
Overall for a 1st attempt I was very happy with the final results, but I’ll make a few tweaks to the process next time.
-
Made my 1st batch of Snack Sticks Following this excellent tutorial. I used 100% Wagyu Brisket Trimmings, Dehydrated Jalapeno, & Cheddar Cheese, & Willies Seasoning. Can’t wait to make some more, and try some other flavor combinations.
Overall for a 1st attempt I was very happy with the final results, but I’ll make a few tweaks to the process next time.
-
Made my 1st batch of Snack Sticks Following this excellent tutorial. I used 100% Wagyu Brisket Trimmings, Dehydrated Jalapeno, & Cheddar Cheese, & Willies Seasoning. Can’t wait to make some more, and try some other flavor combinations.
Overall for a 1st attempt I was very happy with the final results, but I’ll make a few tweaks to the process next time.
PaulGrant
Man, those look nice! I’d celebrate with some Tito’s.
-
Made my 1st batch of Snack Sticks Following this excellent tutorial. I used 100% Wagyu Brisket Trimmings, Dehydrated Jalapeno, & Cheddar Cheese, & Willies Seasoning. Can’t wait to make some more, and try some other flavor combinations.
Overall for a 1st attempt I was very happy with the final results, but I’ll make a few tweaks to the process next time.
PaulGrant
What cut of beef did you use? I’ve never tried all beef. Looks like you did a fine grind on those. -
Made my 1st batch of Snack Sticks Following this excellent tutorial. I used 100% Wagyu Brisket Trimmings, Dehydrated Jalapeno, & Cheddar Cheese, & Willies Seasoning. Can’t wait to make some more, and try some other flavor combinations.
Overall for a 1st attempt I was very happy with the final results, but I’ll make a few tweaks to the process next time.
PaulGrant
Oops, just seen the Wagyu. -
PaulGrant
What cut of beef did you use? I’ve never tried all beef. Looks like you did a fine grind on those.PapaSop It was a coarse and then a fine grind. I then ran it through a meat mixer to get good protein extraction. added the cheese and mixed in by hand. I trim dozens of Wagyu briskets a year and usually end up with a couple hundred pounds of trimmings that need to be used for something.
-
PaulGrant You should be happy with those results, they look amazing! Good choice on the Willie’s, I have a batch in the smoker right now of Willie’s with Encapsulated Citric Acid, Cheddar cheese and Sure Gel. It is 70% pheasant and 30% pork fat, I can’t wait to see how they turn out!
Get more help with your processing questions and learn more about processing meat by subscribing to our waltonsinc.com youtube page at https://wltns.link/waltonstv I am a Gorilla, love yourself
-
PaulGrant You should be happy with those results, they look amazing! Good choice on the Willie’s, I have a batch in the smoker right now of Willie’s with Encapsulated Citric Acid, Cheddar cheese and Sure Gel. It is 70% pheasant and 30% pork fat, I can’t wait to see how they turn out!
-
PaulGrant They were actually excellent! I am surprised and extremely pleased with how tasty they were. I used 4 lb of pheasant breast, 1 lb of pork fat that I just trimmed off of a pork butt that I bought this morning. They have a great consistency, texture, snap and taste. I’d highly recommend this to anyone who hunts pheasant and likes making snack sticks!
-
fourgonefishn I personally would not do snack sticks on a dehydrator. That doesn’t mean it cannot be done, but I think you will end up with a much better product by using a smoker. If you don’t have a smoker, then I’d use an oven, and dehydrator would be my last choice. A dehydrator just doesn’t have a high enough temperature to completely cook meat snacks. You could start some of the lower temps of the cook cycle with a dehydrator, but finishing in a smoker or oven would be ideal.
Austin
Hey, I’m new here so not even sure if this is the right way to post a question… but I’m looking to make pepperoni snack sticks and the article said it could be done without a casing…I have a jerky shooter with a snack stick attachment but do not have a smoker so would need to do this in the oven. Do you have a step by step recipe on how to accomplish this using venison meat? Thanks!! -
Austin
Hey, I’m new here so not even sure if this is the right way to post a question… but I’m looking to make pepperoni snack sticks and the article said it could be done without a casing…I have a jerky shooter with a snack stick attachment but do not have a smoker so would need to do this in the oven. Do you have a step by step recipe on how to accomplish this using venison meat? Thanks!!lucius
If you want to use an oven, check out this post here for some helpful tips:
https://meatgistics.waltonsinc.com/topic/1463/meat-processing-equipment-208-low-temp-ovenFor making a skinless snack stick, you can follow the same beginning process. Same ingredients, grind, mix, etc. When you stuff, you are just using the jerky shooter instead of a stuffer, and no casing. So, you want to stuff the sticks directly onto a cooking rack, or pan, etc. that you can place in the oven. To get the oven to stick to the temperatures you will want to try to hit in the cook cycle, read the article above, but you will also have to experiment a bit with your oven to see how you can make it work best in your case. They key is a low starting temp with a gradual increase. Starting the cooking process with a higher heat will end up with a less than desirable product, but at least still edible as long as you cook to a 160 internal temp.
We don’t have any other full write-ups using a jerky shooter. Just try to follow the info in the recipe here as closely as you can, or also read through the Meatgistics University article here: https://meatgistics.waltonsinc.com/topic/1463/meat-processing-equipment-208-low-temp-oven and when it comes to cooking, trying to follow the same cook cycle as you would on a smoker, but read the article about cooking in an oven above.
-
Hey guys, I’m the new kid in the neighborhood and have only made a couple of posts on this forum. I have read extensively all of the post concerning prepping homemade snack sticks and I’'m ready to try my hand. I know I’ll make mistakes but I learn by doing. I’m as familiar as I can be with your on line processes and procedures, and you have done well in your presentations.
OK, Back to me and my problems. Hardware ??? 1. I have in-house a medium size household food grinder that I plan on trying?? to use. 2. I have a Hobart commercial stand mixer, 3 speed, 1/3 hp pulling 8.2 amps. I plan to buy the 16 lb. Walton stuffier. I can’t justify the Walton smoker at this time. Help needed on a reasonably priced and quality SS smoker. Thank You Tommy -
Hey guys, I’m the new kid in the neighborhood and have only made a couple of posts on this forum. I have read extensively all of the post concerning prepping homemade snack sticks and I’'m ready to try my hand. I know I’ll make mistakes but I learn by doing. I’m as familiar as I can be with your on line processes and procedures, and you have done well in your presentations.
OK, Back to me and my problems. Hardware ??? 1. I have in-house a medium size household food grinder that I plan on trying?? to use. 2. I have a Hobart commercial stand mixer, 3 speed, 1/3 hp pulling 8.2 amps. I plan to buy the 16 lb. Walton stuffier. I can’t justify the Walton smoker at this time. Help needed on a reasonably priced and quality SS smoker. Thank You TommyOde -Tom The Masterbuilt 40 models are good bang for the buck and Pit Boss 5 series vertical seems like a good option. If their smoker is anything like the grill I bought recently it should perform well. Both companies also have good customer support should you need it.
-
Ode -Tom Another option would be a smoker/pellet grill combo like the GMG, Yoder (might be a little pricey) or something like that? More bang for your buck and while not necessarily ideal for smoking snack sticks it 100% can be done and it gives you more use. I personally use only my pellet grill/smokerat home now. Though, admittedly when I do snack sticks or something I have either the PK 100 or the big commercial smoker here that I can use.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register LoginSponsored By:
