Give me other options besides pk100
-
twilliams Same here, but I tried at least to they cannot say I did not give them a chance & the opportunity. I don’t know if Kernersville sells Ford or not. However, there prices & service helped me decide to switch to Dodge. You might want to look them up. A lady named Mary helped us a lot as well as some others.
calldoctoday I just did, prices seem to be about the same on their fb page. I will see if they have a Ford dealership
-
calldoctoday I just did, prices seem to be about the same on their fb page. I will see if they have a Ford dealership
twilliams Wow, maybe they have changed. I am shocked or maybe it is a regional thing where they are all just ridiculous around here, along with stock being limited so they want to sell you some really over built models that are too fancy along with no diesel unless it is a $65,000.00 - $70,000 truck half the time.
-
@randie-nulph you just clarified it for yourself in your comment, NOTHING will compare to the PK100 besides a bigger model. And if $500 is throwing you off you definitely dont want to see the price of bigger models. I do get your reluctance though as i am in the same boat of purchasing a 2022 Ford F250, i just have a hard time spending $65,000 when it should be no more than $40,000
-
depending on how handy you are people here have built their own and the old timers always did
-
depending on how handy you are people here have built their own and the old timers always did
craigrice said in Give me other options besides pk100:
depending on how handy you are people here have built their own and the old timers always did
That is going to be my next smoker.
-
calldoctoday I just did, prices seem to be about the same on their fb page. I will see if they have a Ford dealership
twilliams I just looked too. Wow, I don’t know what happened to them. Their inventory looks way down though & a lot of the trucks were only next year & this year, so it looks like they have sold everything but the latest. I saw the prices too. Believe me, I paid no where near that much, not even close, & could not afford it if I had to. That is crazy. I hope you are able to find something right. You would think by nearly October you would be able to. I got mine on September 1st of last year & it was perfect for the most part as I indicated. I don’t know if you talk to them if they might have something else or not. There used to be another one like them in Hempstead, Texas. However, I understand they went out of business. My brother said a NFL football player bought them out & drove the business into the ground with debt. Wishing you the very best.
-
RafterW i have a kbq 60. Temp range is unbeatable. U can get as low as room temp. Downside is that they require babysitting. If you run one correctly, though, the smoke quality is 2nd to none
-
twilliams I just looked too. Wow, I don’t know what happened to them. Their inventory looks way down though & a lot of the trucks were only next year & this year, so it looks like they have sold everything but the latest. I saw the prices too. Believe me, I paid no where near that much, not even close, & could not afford it if I had to. That is crazy. I hope you are able to find something right. You would think by nearly October you would be able to. I got mine on September 1st of last year & it was perfect for the most part as I indicated. I don’t know if you talk to them if they might have something else or not. There used to be another one like them in Hempstead, Texas. However, I understand they went out of business. My brother said a NFL football player bought them out & drove the business into the ground with debt. Wishing you the very best.
calldoctoday yeah it’s like this all over, lack of vehicles, high demand so prices are above the bar. That’s ok, I’m not ordering til July 2022. If the market don’t settle down by then, I will just put all my money to paying off my house. It doesn’t look like it’s gonna get better anytime soon since they are shutting down the GM plants and cutting way back on Ford. Haven’t heard what Stellantis (Dodge,Chrysler,RAM) is planning yet due to these chip shortages. Rumor has it Ford is doing a body redesign for 2023, that’s making me nervous since I like the design they currently have, just wish the options were different
-
calldoctoday yeah it’s like this all over, lack of vehicles, high demand so prices are above the bar. That’s ok, I’m not ordering til July 2022. If the market don’t settle down by then, I will just put all my money to paying off my house. It doesn’t look like it’s gonna get better anytime soon since they are shutting down the GM plants and cutting way back on Ford. Haven’t heard what Stellantis (Dodge,Chrysler,RAM) is planning yet due to these chip shortages. Rumor has it Ford is doing a body redesign for 2023, that’s making me nervous since I like the design they currently have, just wish the options were different
twilliams I am with you. Yes, the further into the future we seem to go, the less I like many of the new body designs. Call me what you want.
-
RafterW i have a kbq 60. Temp range is unbeatable. U can get as low as room temp. Downside is that they require babysitting. If you run one correctly, though, the smoke quality is 2nd to none
IVERYAN nice. I was reading up on them on the amazing ribs site and they mentioned a limited temp range. They are pretty popular with the guys on the BGE forum. Do you really find yourself having to stoke the firebox every 30 minutes? That is also what amazing ribs claims.
Matt W.
-
IVERYAN nice. I was reading up on them on the amazing ribs site and they mentioned a limited temp range. They are pretty popular with the guys on the BGE forum. Do you really find yourself having to stoke the firebox every 30 minutes? That is also what amazing ribs claims.
RafterW the coal bed on it needs tended at least every 30 min. In my opinion that is one of its biggest drawbacks. The top end temp is probably the range issue they are discussing. I think it can get into the low 300s, but ive never needed to go there when smoking. I love it for smoking sausage because i can easily start my drying cycle around 100 degrees.
-
So, I have been looking to get a pk100 to try for quite a while and even close to ordering a couple times this year. Last time I checked they were “sold out” . Now I get on to check and it is like $500 more and that is turning me off from buying one right now and really disappointed.
With that being said, does anyone know of another smoker to check out that is comparable to the pk100 ? Help me find some options.@randie-nulph said in Give me other options besides pk100:
So, I have been looking to get a pk100 to try for quite a while and even close to ordering a couple times this year. Last time I checked they were “sold out” . Now I get on to check and it is like $500 more and that is turning me off from buying one right now and really disappointed.
With that being said, does anyone know of another smoker to check out that is comparable to the pk100 ? Help me find some options.As others have mentioned, building your own electric smoker is a viable option for many people.
The PK100 is just an insulated cabinet, an electric heat source with controls, and air controls. The smoke source is low tech, just a pan of chips on the heat source.
Where the PK100 shines (literally) is the nice SS construction. Its possible to find an insulated SS cabinet to make your own smoker, but it can take some time. I used a hospital blanket warmer to make mine.
Paul
-
@randie-nulph said in Give me other options besides pk100:
So, I have been looking to get a pk100 to try for quite a while and even close to ordering a couple times this year. Last time I checked they were “sold out” . Now I get on to check and it is like $500 more and that is turning me off from buying one right now and really disappointed.
With that being said, does anyone know of another smoker to check out that is comparable to the pk100 ? Help me find some options.As others have mentioned, building your own electric smoker is a viable option for many people.
The PK100 is just an insulated cabinet, an electric heat source with controls, and air controls. The smoke source is low tech, just a pan of chips on the heat source.
Where the PK100 shines (literally) is the nice SS construction. Its possible to find an insulated SS cabinet to make your own smoker, but it can take some time. I used a hospital blanket warmer to make mine.
processhead that thing is a beast and looks awesome. Great job.
-
@randie-nulph said in Give me other options besides pk100:
So, I have been looking to get a pk100 to try for quite a while and even close to ordering a couple times this year. Last time I checked they were “sold out” . Now I get on to check and it is like $500 more and that is turning me off from buying one right now and really disappointed.
With that being said, does anyone know of another smoker to check out that is comparable to the pk100 ? Help me find some options.As others have mentioned, building your own electric smoker is a viable option for many people.
The PK100 is just an insulated cabinet, an electric heat source with controls, and air controls. The smoke source is low tech, just a pan of chips on the heat source.
Where the PK100 shines (literally) is the nice SS construction. Its possible to find an insulated SS cabinet to make your own smoker, but it can take some time. I used a hospital blanket warmer to make mine.
processhead How in the devil did you come across that beautiful piece of furniture?
-
@randie-nulph said in Give me other options besides pk100:
So, I have been looking to get a pk100 to try for quite a while and even close to ordering a couple times this year. Last time I checked they were “sold out” . Now I get on to check and it is like $500 more and that is turning me off from buying one right now and really disappointed.
With that being said, does anyone know of another smoker to check out that is comparable to the pk100 ? Help me find some options.As others have mentioned, building your own electric smoker is a viable option for many people.
The PK100 is just an insulated cabinet, an electric heat source with controls, and air controls. The smoke source is low tech, just a pan of chips on the heat source.
Where the PK100 shines (literally) is the nice SS construction. Its possible to find an insulated SS cabinet to make your own smoker, but it can take some time. I used a hospital blanket warmer to make mine.
processhead You are so on point. I made two of them from food warming cabinets. Really didn’t need much modification, just hook up a controller and ready to go. Good from ambient temperature to well hotter than I could ever use.
I do take advantage for the 3 cold days I get in Texas for cold smoking, so I watch the weather forecast during the winter.
I did use a humidifier that sprays a mist on the humidity pan on the bottom, Most warmers have a humidity control.
I which they were made from stainless, but aluminum is not too bad to keep clean.
Best part is most restaurant auctions sell them for less than $200.
-
That look great. And not much modifications would need to be made.
-
@randie-nulph you just clarified it for yourself in your comment, NOTHING will compare to the PK100 besides a bigger model. And if $500 is throwing you off you definitely dont want to see the price of bigger models. I do get your reluctance though as i am in the same boat of purchasing a 2022 Ford F250, i just have a hard time spending $65,000 when it should be no more than $40,000
-
twilliams the closest I had seen has been the sausage maker smokers. Very similar. Not quite as heavy of construction, they only go down to 100 deg and the size. The 50lb smoker is 220v and I don’t have 220 at my house.
@randie-nulph You probably have 240 VAC, you may just need to add a dedicated circuit for it, if there is sufficient availability. You would have to first find out if you have the electrical space & capacity, then decide if you want the expense of adding it, whether or not it is worth it.
-
twilliams the closest I had seen has been the sausage maker smokers. Very similar. Not quite as heavy of construction, they only go down to 100 deg and the size. The 50lb smoker is 220v and I don’t have 220 at my house.
@randie-nulph Smokin Tex, Cook shack, Blaze. Not sure if these were mentioned
-
processhead How in the devil did you come across that beautiful piece of furniture?
calldoctoday said in Give me other options besides pk100:
processhead How in the devil did you come across that beautiful piece of furniture?
That’s an interesting story. A guy had the blanket warmer and a big commercial refrigerator listed for sale on Craig’s List. He was experimenting with building meat smokers too and lost interest after scorching the vinyl siding off part of his house with one of his “projects”. I suspect his wife might have had something to do with his loss of interest.
I bought both the warmer and the refrigerator and hauled them home.
The blanket warmer became my sausage and cured meat smoker. The refrigerator needed some reassembly and repair work, but all the parts where there. It’s big enough to hold 3 cut up deer so its pretty handy to have around. It stays at our deer camp.
Paul
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register LoginSponsored By:
