Give me other options besides pk100

[IVERYAN]

RafterW i have a kbq 60. Temp range is unbeatable. U can get as low as room temp. Downside is that they require babysitting. If you run one correctly, though, the smoke quality is 2nd to none

[twilliams]

calldoctoday yeah it’s like this all over, lack of vehicles, high demand so prices are above the bar. That’s ok, I’m not ordering til July 2022. If the market don’t settle down by then, I will just put all my money to paying off my house. It doesn’t look like it’s gonna get better anytime soon since they are shutting down the GM plants and cutting way back on Ford. Haven’t heard what Stellantis (Dodge,Chrysler,RAM) is planning yet due to these chip shortages. Rumor has it Ford is doing a body redesign for 2023, that’s making me nervous since I like the design they currently have, just wish the options were different

[calldoctoday]

twilliams I am with you. Yes, the further into the future we seem to go, the less I like many of the new body designs. Call me what you want.

[RafterW]

IVERYAN nice. I was reading up on them on the amazing ribs site and they mentioned a limited temp range. They are pretty popular with the guys on the BGE forum. Do you really find yourself having to stoke the firebox every 30 minutes? That is also what amazing ribs claims.

[IVERYAN]

RafterW the coal bed on it needs tended at least every 30 min. In my opinion that is one of its biggest drawbacks. The top end temp is probably the range issue they are discussing. I think it can get into the low 300s, but ive never needed to go there when smoking. I love it for smoking sausage because i can easily start my drying cycle around 100 degrees.

[processhead]

@randie-nulph said in Give me other options besides pk100:

So, I have been looking to get a pk100 to try for quite a while and even close to ordering a couple times this year. Last time I checked they were “sold out” . Now I get on to check and it is like $500 more and that is turning me off from buying one right now and really disappointed.
With that being said, does anyone know of another smoker to check out that is comparable to the pk100 ? Help me find some options.

As others have mentioned, building your own electric smoker is a viable option for many people.

The PK100 is just an insulated cabinet, an electric heat source with controls, and air controls. The smoke source is low tech, just a pan of chips on the heat source.

Where the PK100 shines (literally) is the nice SS construction. Its possible to find an insulated SS cabinet to make your own smoker, but it can take some time. I used a hospital blanket warmer to make mine.

[cdavis]

processhead that thing is a beast and looks awesome. Great job.

[calldoctoday]

processhead How in the devil did you come across that beautiful piece of furniture?

[Chef]

processhead You are so on point. I made two of them from food warming cabinets. Really didn’t need much modification, just hook up a controller and ready to go. Good from ambient temperature to well hotter than I could ever use.

I do take advantage for the 3 cold days I get in Texas for cold smoking, so I watch the weather forecast during the winter.

I did use a humidifier that sprays a mist on the humidity pan on the bottom, Most warmers have a humidity control.

I which they were made from stainless, but aluminum is not too bad to keep clean.

Best part is most restaurant auctions sell them for less than $200.

[samspade]

That look great. And not much modifications would need to be made.

[Randie N]

twilliams the closest I had seen has been the sausage maker smokers. Very similar. Not quite as heavy of construction, they only go down to 100 deg and the size. The 50lb smoker is 220v and I don’t have 220 at my house.

[calldoctoday]

@randie-nulph You probably have 240 VAC, you may just need to add a dedicated circuit for it, if there is sufficient availability. You would have to first find out if you have the electrical space & capacity, then decide if you want the expense of adding it, whether or not it is worth it.

[YooperDog]

@randie-nulph Smokin Tex, Cook shack, Blaze. Not sure if these were mentioned

[processhead]

calldoctoday said in Give me other options besides pk100:

processhead How in the devil did you come across that beautiful piece of furniture?

That’s an interesting story. A guy had the blanket warmer and a big commercial refrigerator listed for sale on Craig’s List. He was experimenting with building meat smokers too and lost interest after scorching the vinyl siding off part of his house with one of his “projects”. I suspect his wife might have had something to do with his loss of interest.

I bought both the warmer and the refrigerator and hauled them home.

The blanket warmer became my sausage and cured meat smoker. The refrigerator needed some reassembly and repair work, but all the parts where there. It’s big enough to hold 3 cut up deer so its pretty handy to have around. It stays at our deer camp.

[cdavis]

processhead wow that is quite a find. Congrats

[smokinbubba]

Over the years I have used everything from a 2 drawer file cabinet with propane burner, to a well pressure tank, to a hospital food warmer to make a smoker. But now,
For “Q” I use cookshacks exclusively. Have for over 20 yrs. For sausage I use a vertical offset with a turkey fryer burner for heat, cast iron skillet for sawdust and lid. I usually only take sausage to 130 then go the SV method for finishing. I’m sure the PK is a fine machine but well beyond my budget.

[Randie N]

YooperDog I already have a cookshack. Need something bigger than one I have and also want lower Temps and air flow for cold smoking

[twilliams]

@randie-nulph i dont believe the pk 100 will be good for cold smoking unless you just use a smoking tube and not the burner for saw dust

[Randie N]

twilliams so how low of a temp can you go on the pk and not have problems creating smoke? Dry or wet sawdust?

[twilliams]

@randie-nulph i believe the lowest setting is 100°. You want to run damp sawdust.