Vacuum sealer
-
There is no sneaking around wives, just bribery… I got my vacuum sealer because she got a sewing machine that was much more than the chamber sealer.
johnsbrewhouse said in Vacuum sealer:
There is no sneaking around wives, just bribery… I got my vacuum sealer because she got a sewing machine that was much more than the chamber sealer.
Can relate to that. After the Ex bought her third sewing machine… I bought the telescope I always wanted. It’s give and take.
-
Trying to decide on a upgrade from my food saver. It would be for processing wild game. Looking at weston 2300, weston 2600 and weston 3000. Found a 2300 for $250 but not sure to buy it because mixed reviews breaking in a year or less.
bedcitty Got to say that the chamber vacuum sealers are worth their cost. It saves so much food in the log run, bags are much cheaper, and can be used for so many things around the house. If you can hang in there, it may be worth the wait.
And guys, just remember what is yours is hers and what is hers is hers.
-
Trying to decide on a upgrade from my food saver. It would be for processing wild game. Looking at weston 2300, weston 2600 and weston 3000. Found a 2300 for $250 but not sure to buy it because mixed reviews breaking in a year or less.
bedcitty Hi, i own a 2300. Had it for 10yrs+ It has done well for me, vacpacing over a a 1000 packs of sausage with only a few seal failures… 5-6, and they were my fault by oversight. The good thing about the machine is that you have a 16" seal bar for big things like full 7 bone roasts and pork butts which i S.V. Down side is you can’t vacpac liquids or semi liquids that can be vac’d in a chamber. I also have a vp230 chamber sealer. It’s great, but the size of the bags are limited. It will pac my chilies, and soups. It’s quite and faster with little over-site while processing. Bottom line here the money you want to spend and use of the equipment.
My final thought is that the 2300 is a great entry level starter. A vac chamber $1500+ or an upgrade vac sealer $400-$500 is a future thought after you see the need, based on your dynamically changing requirements. It would be and upgrade, but don’t buy if you don’t understand the need… Hope this helps. Ask questions… Joe
-
bedcitty Got to say that the chamber vacuum sealers are worth their cost. It saves so much food in the log run, bags are much cheaper, and can be used for so many things around the house. If you can hang in there, it may be worth the wait.
And guys, just remember what is yours is hers and what is hers is hers.
Chef Hi, good to hear fm you. There is a hack for the food bags to use the vac chamber bags with food saver. Just have to say it’s all about returns for money spent. What you need vs what you want… For most entry level Sausage Warriors of the first level it is overwhelming. I say start slow and with experience they will find the need vs the want
-
PapaSop said in Vacuum sealer:
John Belvedere
Wish you the best on the sneaking part. Been there… done that. LOLCurrently on my third Foodsaver. Could have paid for a chambered one and then some.
You mean I can’t use the “Look what I found in the basement” line
John Belvedere Never tried that line, but then again, I’ve never had a basement.
-
PapaSop said in Vacuum sealer:
John Belvedere
Wish you the best on the sneaking part. Been there… done that. LOLCurrently on my third Foodsaver. Could have paid for a chambered one and then some.
You mean I can’t use the “Look what I found in the basement” line
John Belvedere I couldn’t use that line as well, the basement is her craft room. The whole thing. You think we have an obsession with our hobby, try living with a quilter. I have a quilting machine, two embroidery machine, a sewing machine and a serger in the basement I am not allowed to even touch. And scissors, I have to get my own, I don’t dare use any for downstairs if I care to live. I generally don’t have to ask to hard to buy something as long as it not expensive and we plan for it.
-
John Belvedere I’ve had the VacMaster Pro380 for a couple of years. It has an 16" seal bar which makes it perfect for roasts and ribs and larger items. This past fall and winter I sealed well over 250 bags with smoked cheese or smoked nuts. I only had 1 seal failure that I found and that was my fault. We also do a couple of bushels of roasted chile each fall without problem.
-
How big of an item do most chamber vacs hold? I was looking at getting one, but I frequently seal whole pork butts (or close to it). Do they generally accommodate something that size?
-
John Belvedere I’ve had the VacMaster Pro380 for a couple of years. It has an 16" seal bar which makes it perfect for roasts and ribs and larger items. This past fall and winter I sealed well over 250 bags with smoked cheese or smoked nuts. I only had 1 seal failure that I found and that was my fault. We also do a couple of bushels of roasted chile each fall without problem.
Bob Stehlik how much does the 380 weigh? My vp230 is apx 100lbs.
-
How big of an item do most chamber vacs hold? I was looking at getting one, but I frequently seal whole pork butts (or close to it). Do they generally accommodate something that size?
Midwest_kc my vp230 will do a b.o butt. Max bag is 14x16. H 5” center dome. MSRP $1799. Sale $1200
-
Midwest_kc my vp230 will do a b.o butt. Max bag is 14x16. H 5” center dome. MSRP $1799. Sale $1200
-
Bob Stehlik how much does the 380 weigh? My vp230 is apx 100lbs.
JoeB My VacMaster Pro 380 is a counter top/table top model and weighs approximately 23 lbs. I purchased it from Waltons’s approx. 3 yrs. ago. It is a non- chambered unit.
-
JoeB Thanks!
Midwest_kc My Weston vac sealer 2300 has as 16" seal bar and will do any length bag you cut… . . no liquids msrp apx $390, sale $290.
-
JoeB Thanks!
Midwest_kc My Weston vac sealer 2300 has as 16" seal bar and will do any length bag you cut… . . no liquids msrp apx $390, sale $290.
-
JoeB My VacMaster Pro 380 is a counter top/table top model and weighs approximately 23 lbs. I purchased it from Waltons’s approx. 3 yrs. ago. It is a non- chambered unit.
Bob Stehlik ok, i was confused… 2nd thing that stops working after 70
Thought you were talking about a vac chamber 380 that would be a monster because my vac chamber 230 is 100lbs -
Midwest_kc My Weston vac sealer 2300 has as 16" seal bar and will do any length bag you cut… . . no liquids msrp apx $390, sale $290.
JoeB I’ve got a food saver right now for a non chambered unit. Really looking for a chambered one, just want to make sure I get one that will meet my needs.
-
JoeB I’ve got a food saver right now for a non chambered unit. Really looking for a chambered one, just want to make sure I get one that will meet my needs.
Midwest_kc Now I understand, i moved up from a food saver to a master pro 2300 apx 10 yrs ago. It is a good product and did a great job for me. More labor intense than a vac chamber, but also expedientialy less expensive. Chambers are wonderful, and i use mine often, but i still fall back on my vac sealer 2300 for big boy stuff with no liquids… I would do the $300 and grow into the $1700 in time. One last thing, over the last 10yrs with my 2300, i have bagged 1000+. Replaced the seals once, and the heat wire once. Both cost under $15 easy repair. Best to buy what you need, not what you want… That’s my rule. joe
-
I am a little ashamed, yet proud to admit that I have the cheapest model of Food Saver vac sealer that I found on sale at Menards for $95 over 12 years ago. It has served me well and keeps on sealing perfect packages as long as I feed it quality film.
I am sure some day it will die, and I will need to upgrade, but until then, it keeps soldiering on. -
Trying to decide on a upgrade from my food saver. It would be for processing wild game. Looking at weston 2300, weston 2600 and weston 3000. Found a 2300 for $250 but not sure to buy it because mixed reviews breaking in a year or less.
-
I am a little ashamed, yet proud to admit that I have the cheapest model of Food Saver vac sealer that I found on sale at Menards for $95 over 12 years ago. It has served me well and keeps on sealing perfect packages as long as I feed it quality film.
I am sure some day it will die, and I will need to upgrade, but until then, it keeps soldiering on.processhead Well stated Paul. For most things in my life and hobbies i use the same philosophy. . … . Replace when failure occurs with possible upgrade
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register LoginSponsored By:
