Any Mechanics?
-
there are different grades of parts out there depending on were and how much you spend, aftermarket parts do not always last as long as retail because of the quality of the product
-
Denny Just had the tired replaced and I had the bearing checked and it is still happening. Ghosts?
-
jonathon have you tried jacking up each front wheel and spinning it then place your your hands at 3 & 9 then push back and forth then at 12 and 6 then observe any play then have your wife work the steering back and forth while you look for any play in the connecting joints this will tell much and then pass it on to your mechanic or parts store and they can narrow it down from there
craigrice said in Any Mechanics?:
jonathon have you tried jacking up each front wheel and spinning it then place your your hands at 3 & 9 then push back and forth then at 12 and 6 then observe any play then have your wife work the steering back and forth while you look for any play in the connecting joints this will tell much and then pass it on to your mechanic or parts store and they can narrow it down from there
Have her turn the steering wheel slightly back and forth not to much and have the truck sitting on all 4,
Does the noise come on a gradual curve? Right or left curve?
Sounds like a wheel bearing from what you described -
@s-a-m I had the bearing checked and was told it was fine. when the car isnt in motion there is no noise when the wheel is turned. When driving it only happens when the car is turning or angling to the right.
-
what if any things are showing up on your dash ?
-
craigrice The only thing on my dash that lights up is the battery indicator.
-
When turning right does the noise come from the left front wheel?
-
@s-a-m Yes, left front wheel. Happened the other day when I wasn’t turning.
-
Left wheel bearing! Needs checked that’s classic signs, in a right turn your putting more side load on the left bearing causing the noise
-
@s-a-m I had my mechanic check the wheel bearing and he said it was perfectly fine, he was tearing his hair out trying to figure it out.
Get more help with your processing questions and learn more about processing meat by subscribing to our waltonsinc.com youtube page at https://wltns.link/waltonstv I am a Gorilla, love yourself
-
@s-a-m I had my mechanic check the wheel bearing and he said it was perfectly fine, he was tearing his hair out trying to figure it out.
Jonathon I’m with s.a.m I still say it’s the wheel bearing. I checked mine when it started making noise and it had no play in it. Two months later it was about to fall off.
-
Okay, I will call him today to confirm. I have started to occasionally hear it when going straight now, not all the time but occasionally.
-
If you do a slight weave side to side going down the road (carefully)!you will hear it one way not so much the other.
-
@s-a-m Yup that does happen. Okay, thanks guys I called my mechanic yesterday and asked him to call me and I’ll talk tohim again about the wheel bearing.
Get more help with your processing questions and learn more about processing meat by subscribing to our waltonsinc.com youtube page at https://wltns.link/waltonstv I am a Gorilla, love yourself
-
YooperDog I’ve owned several early 70’s Ford 150’s and 250’s…loved them. Most were bought for around $500. I just picked up a 92’ 250 with a 460 for $500! I’ve made a few hauls to the landfill in the meantime so IMO it’s already paid for itself. It’s still running on the same tank of gas the previous owner provided but as few miles as I’ve put on this rig it’s obvious that it has a drinking problem. That said, anytime I leave the mechanic with a bill for $500 I feel like I dodged a bullet. For that money I’d say fix the things that need fixed anyway and roll the dice that it solves your problem.
Joe Hell - You must have one HELL of a job to feed that 460.
-
@s-a-m Yup that does happen. Okay, thanks guys I called my mechanic yesterday and asked him to call me and I’ll talk tohim again about the wheel bearing.
-
@s-a-m None, the mechanic said he checked wheel bearing and there is no problem with that. We replaced a stuck brake caliper a few months ago but that wasn’t it. He said it still needs the master cylinder replaced. It is happening now occasionally when I am driving straight but it seems to stop when I accelerate or brake so I am wondering if it isn’t something that has come loose and is just flapping. I tried to get my wife to agree to let me drive over here so she could check but in her typical selfish fashion she said no!
-
If your truck is a 4x4, have you checked the U-joints?
-
It is a 4x4 and no…I will look up how to check that, thank you!
Get more help with your processing questions and learn more about processing meat by subscribing to our waltonsinc.com youtube page at https://wltns.link/waltonstv I am a Gorilla, love yourself
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register LoginSponsored By:
