Rookie Questions on Smoker Sausage

[mikesr]

Thanks Jonathon. I don’t really have a smoke schedule. I put a water pan in the bottom of the smoker and try to keep the temp as close to 225 as possible (the smoker is very inconsistent and will spike to higher temps unless I’m standing over it constantly). Then I just monitor the internal meat temp. It’s taken 2 hours or less for the sausage to come to fully cooked temperature, so I think that amounts to “no schedule”. I do soak the casings, but only in tap water temperature. Thanks again.

[Jonathon]

mikesr Stepping up your temps is the first thing I would try. Follow this smoke schedule and see if it works better
Set up your smoker and hang your sausage on smoke sticks or lay on racks and smoke at
125F for 1 hour
140F for 1 hour
155F for 2 hours
175F until internal meat temp of 160F
Got that from here https://meatgistics.waltonsinc.com/topic/761/cured-sausage-108-basics-for-making-smoked-sausage/2

[mikesr]

Thanks Jonathon. My smoker isn’t capable of anywhere near that degree of precision. I’m ordering a digital temp controller and I think that is going to remedy the smoking schedule / temperature situation. I’ll let you know how it turns out.

[Joe1]

mikesr I have an older charbroil electric smoker. I purchased an auber instruments WSD-1500H-W it was a little pricey at $240.00 but it works great at maintaining temperature and it’s programmable for smoke schedule. Also has an app you can use to monitor/modify schedule on your phone or tablet. It has 1 probe for smoker temperature and 2 for IT. only problem, I could have used the money to upgrade smoker .

[mikesr]

Thanks Joe1. That’s the system my research has led me to. It’s great to hear that it works as advertised. I thought about upgrading my smoker too. Only problem: it’s built in to an outdoor cook center and nothing else would fit. Sounds like the Auber Instruments is at least part of the solution. Thanks!

[Joe1]

This post is deleted!

[Joe1]

mikesr here’s a screenshot of what I got from the app.

[mikesr]

Thanks Joe. Looks like the real deal.

[Joe Hell]

Jonathon I prefer to soak my casings for several hours or overnight in the fridge. The standard 30-60 minutes never gives me the results I’m looking for. They don’t come off the horn as easy as ones soaked longer

[glen]

Joe Hell Good tip, that could explain why my casings are sometimes hard to get along with

[mikesr]

Thank you Joe. Many good tips here for a beginner.

[glen]

mikesr Mike, lots of experience in the community but I don’t think you will find anyone here who hasn’t learned a few things

[mikesr]

And willing to help. Thanks.

[TexLaw]

Jonathon said in Rookie Questions on Smoker Sausage:

140F for 1 hour
155F for 2 hours

I’ve been meaning to ask (and apologize if you’ve answered this somewhere else). For those steps, when do you start the clock?

Is it once you’ve reached the target temperature? That’s what I’ve been doing, and it’s working fine, but I wanted to check on that.

[TexLaw]

mikesr said in Rookie Questions on Smoker Sausage:

Also, the meat filling itself is somewhat dense in texture, even though I use the coarse grinding plate and only run the meat through the grinder one time.

I agree that you probably are overcooking your sausage, especially since you didn’t use an ice bath. You will get some carryover temperature rise, especially if your smoker temperature is getting as high as 250F. I overcooked a batch, and it was very dense–sort of rubbery. It tasted good, but that wasn’t the texture I wanted.

Also, what binder are you using (and how much)? That can make a significant difference on your final product.

[Jonathon]

TexLaw that’s a good question and not one that I think we have covered but you will want to get your smoker up to temp before putting in the sausage. Sort of like pasta to boiling water, best analogy I can come up with right now!

[TexLaw]

Jonathon I get it up to the starting temp before putting it on, but when do you start the clock for the intermediate steps (e.g., 140F for 1 hour). Is it when you go set the temperature to 140F or when the cooker actually gets there?

[Jonathon]

TexLaw Sorry, misunderstood your question. I start the original clock when it it is at temp but then I don’t adjust the future times. So, start at 120 (put product in at 120) for an hour and then as soon as I adjust the temp the next phase has begun and I start counting down. That went from a good question to a great question and it will be on some sort of video post in the future, you’ll get credit for it!

[sidpost]

mikesr said in Rookie Questions on Smoker Sausage:

Thanks Joe1. That’s the system my research has led me to. It’s great to hear that it works as advertised. I thought about upgrading my smoker too. Only problem: it’s built in to an outdoor cook center and nothing else would fit. Sounds like the Auber Instruments is at least part of the solution. Thanks!

The older analog electric smokers can be problematic with temperature control. This doesn’t matter so much with butts, hams, etc. but, with more delicate smokes just doesn’t work well.

A small IVC (Insulated Vertical Cabinet) may fit in your fabbed in spot for the Cookshack. If take measurements, Humphrey’s from the NorthEast can custom build to fit your kitchen center. Backwoods is another possible solution.

The other option for this type of smoking is a cold smoker. You can always finish it off hotter and faster there or give it a quick blast in the Cookshack. Personally, for this type of smoke, I would start with one my WSM (Weber Smokey Mountain) where I can really throttle down for a slow smoke and then open up for a high heat finish. Craigslist and Letsgo is your friend here. I got a 14" and an 18" model both like new and gently used for $100 by watching the listings for one not being loved in someone’s garage or shed.

[TexLaw]

Jonathon Thanks for clearing that up!