Electric smoker help. Anybody?
-
I don’t think that model will ever be right. With the burner at the bottom your always going to have that overcook half problem. Time for a new cooker…
-
I don’t know if there are grates or just hanging sticks. Use the grates and move around. Or hang loops and rotate top section to bottom. Pretty puttsy. Not sure a fan will really help, I would think you will need to pull the air through, might just make it run hotter.
-
Joe1 That’s a tough one, I would say that getting some air moving in there is going to help but as I have never used one of those I can’t say for sure. What are the dimensions of your smoker? Then we can figure out how many cubic feet per minute of air that you need to move. I’m going to guess that the 6.5 isn’t going to do it for you and the 20 will be needed. Someone check me here but cubic measurements are height x width x depth so 6.5 would be a container that is 2" x 2" x 1.5" (slightly more) and I am guessing yours is bigger than that?
Also, I think we need a confirmed sarcasm font for meatgistics? What about strikethrough? Might be tough though,
as there are just soooo many times I want to use strikethrough hereItalics might be better though, even though strikethrough is so easy to read? -
I don’t think that model will ever be right. With the burner at the bottom your always going to have that overcook half problem. Time for a new cooker…
-
Joe1 then I would say if you wanted to try it the 6.5 cubic feet per minute fan might be enough. Another option is to not hang them past the top half? That wouldn’t let you do much at once though.
-
I don’t know if there are grates or just hanging sticks. Use the grates and move around. Or hang loops and rotate top section to bottom. Pretty puttsy. Not sure a fan will really help, I would think you will need to pull the air through, might just make it run hotter.
YooperDog @ Jonathon it has grates that work with 19mm casings, the sausage fits between the grates. I remove the lower grate so it’s about 1 foot from the top grate to water pan. It holds 12 lbs snugly but not touching. I’m wondering if it is too big a load not allowing air flow between sticks?
-
Joe1 So, you hang them from the top and they go through the lower grates? Yeah, I can see if there was a solid wall of either the grate and meat blocking the spaces in between then that might be causing an issue. We are going to talk with Dylan on the podcast soon about how important airflow in a smoker is.
-
Joe1 So, you hang them from the top and they go through the lower grates? Yeah, I can see if there was a solid wall of either the grate and meat blocking the spaces in between then that might be causing an issue. We are going to talk with Dylan on the podcast soon about how important airflow in a smoker is.
-
YooperDog @ Jonathon it has grates that work with 19mm casings, the sausage fits between the grates. I remove the lower grate so it’s about 1 foot from the top grate to water pan. It holds 12 lbs snugly but not touching. I’m wondering if it is too big a load not allowing air flow between sticks?
Joe1 might want to try what Jonathan suggested. Shortening your loops. Will reduce amount processed, but you may end up with a better product.
-
Adding some airflow (convection) will help at least a little, but (as discussed) you’re real problem is with radiant heat from the burner. It is hard to know what a fan really will do for you until you try. You also can try a larger water pan to act as something of a barrier between the burner and the sausage. I’ve only seen very old versions of that same cooker, so I’m only vaguely aware of what you might be able to get away with in there.
In addition to keeping things further from the burner, you also can try insulating the outside. That way, the burner won’t run as much. Of course, you may not get the smoke you want if you do that, but you are going to have to deal with some sort of tradeoff with that cooker.
-
I cannot help you with that smoker but i agree with get a new one. I have had a Cook Shack electric for 20 years and it is the bomb. it doesn’t have a fan but seals tight and is super insulated so you can smoke in the Kansas winter and still come out great.
-
What are the set points on your pid? I have a pid in my Masterbuilt and put the temp probe within a few inches of the element. I have it set for a swing of 3 degrees so yes at the beginning it will cycle on and off rapidly. But as the chamber heats up the cycles slow down, and the temp settles. My MB has no air vents and only one small fluid drip, and one upper access holes. I checked temps using four wired thermometers spaced top to bottom and after warm up it was pretty stable. Hope this helps a little.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register LoginSponsored By:
