Dry aged experiment
-
Dave R 2 day fermentation with a weight loss of about 4-5 percent. 1 week in the refrigerator 14-15 percent weight loss. The casing is separating from the stick, which I guess it’s supposed to do. Smells awesome. My uncased test patties look like they are ready, but I’m going to see what the look like at 2 wks.
Dave R week 4. A 41 percent weight loss and finally the sticks are firm enough to slice on my new Walton’s 12" slicer I received for a present. The pepperoni tastes great. However, it took twice as long as Umai dry said it would. The other disappointment was that my new 12" slicer from Walton’s only went down to 2mm.
![IMG_20200520_163213805.jpg]
(/assets/uploads/files/1590014339896-img_20200520_163213805-resized.jpg)
Looking for help on the slicer… are there any adjustments for the thickness and carriage adjustments? -
Dave R week 4. A 41 percent weight loss and finally the sticks are firm enough to slice on my new Walton’s 12" slicer I received for a present. The pepperoni tastes great. However, it took twice as long as Umai dry said it would. The other disappointment was that my new 12" slicer from Walton’s only went down to 2mm.
![IMG_20200520_163213805.jpg]
(/assets/uploads/files/1590014339896-img_20200520_163213805-resized.jpg)
Looking for help on the slicer… are there any adjustments for the thickness and carriage adjustments?Dave R pictures look good how do they taste?
-
I wish I had the room to attempt something like that. Hopefully when I move into a bigger house I can get an old drink cooler or fridge and can start dry curing meat also. Inkbird controllers are the ones I hear/read you want.
-
Dave R I used the 12" to slice our dry-cured lomo (dry-cured pork loin) thin enough to see through, so it can definitely do thinner than 2mm. If it is “jumping”(going right to 2 mm) when you try to make it really thin it might just be stiff, working the action for a while on the knob should make it smoother and allow you to set it as thin as you would like. Then, when you have it thin as you want, go ahead and set the depth protecting screw on the back to keep it at that depth.
-
Dave R those are the brand that I have been using to build my control board. I haven’t had the opportunity to put them to work, still rebuilding the reach in. They work good for control on an ‘essential oil’ still though. Many good reviews.
-
Dave R I used the 12" to slice our dry-cured lomo (dry-cured pork loin) thin enough to see through, so it can definitely do thinner than 2mm. If it is “jumping”(going right to 2 mm) when you try to make it really thin it might just be stiff, working the action for a while on the knob should make it smoother and allow you to set it as thin as you would like. Then, when you have it thin as you want, go ahead and set the depth protecting screw on the back to keep it at that depth.
-
Dave R I used the 12" to slice our dry-cured lomo (dry-cured pork loin) thin enough to see through, so it can definitely do thinner than 2mm. If it is “jumping”(going right to 2 mm) when you try to make it really thin it might just be stiff, working the action for a while on the knob should make it smoother and allow you to set it as thin as you would like. Then, when you have it thin as you want, go ahead and set the depth protecting screw on the back to keep it at that depth.
Jonathon well, I guess I win the dumb azz question of the week award. Thank you. I need to eat my Wheaties I guess. The adjustment knob was super tight and after excercising it back and forth a dozen times I was able to get full adjustment out of it. The Meatgistics forum solves another problem. Just in time my capicola is almost ready for the slicer. Thanks
-
We expect pics as payment! I’m getting so excited to get some free time coming up (haha) and start doing some more dry-cured stuff!
-
We expect pics as payment! I’m getting so excited to get some free time coming up (haha) and start doing some more dry-cured stuff!
This post is deleted! -
We expect pics as payment! I’m getting so excited to get some free time coming up (haha) and start doing some more dry-cured stuff!
-
Dave R Glad to hear it! Yeah, the knob on ours stayed tight like that for the first few times and then eased up a little bit. Let me know if it continues past a few more uses and I will see what can be done as far as removing that and lubricating something in there to make it slide a little easier.
-
Dave R Glad to hear it! Yeah, the knob on ours stayed tight like that for the first few times and then eased up a little bit. Let me know if it continues past a few more uses and I will see what can be done as far as removing that and lubricating something in there to make it slide a little easier.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register LoginSponsored By:
