Walk in cooler about ready!
-
Thanks all.
I have a friend who is a certified welder that is going to build a free-standing rail system to hang from. Not really tall enough for trolley so going with rail hooks. Beef quarters will be hung with pulleys or some other means and a rolling work table to just lay them down on when ready to process. I’m a grandpa and have learned how to definitely work smarter and not harder.
Hopefully the compressor hasn’t crapped the bed on me. It had 2 when original, but the previous owner scrapped parts out of one. The company that made the cooler said one compressor and one evaporator will be enough for the size I have cut it down too.Still will have to make things like skinning cradles, benches, etc. Will take awhile to get the flow down and since this is only for family use it won’t get used more than two or three times a year but at least I won’t have to worry about the high price of meat! We’ve always had other’s butcher out stuff before but with all the small shops booked out through next year it’s time to take the plunge and butcher more than just deer
knifemaker3 That is awesome, sounds like you have a pretty good plan going forward. I am sure as you work on your set up you will improve how you do things.
-
knifemaker3 NICE! Iff there is one skill I wish I had it would be welding. Could come in handy in so many ways
Get more help with your processing questions and learn more about processing meat by subscribing to our waltonsinc.com youtube page at https://wltns.link/waltonstv I am a Gorilla, love yourself
-
knifemaker3 NICE! Iff there is one skill I wish I had it would be welding. Could come in handy in so many ways
Jonathon you can pick up a lincoln “tombstone” for a couple hundred and start learning in your garage pretty cheaply. They are great little stick welders. They make two versions, an AC only and an AC/DC. The AC only run about $300 new but keep an eye out on the buy/sell/trades and auctions.
-
RafterW Thanks! I will keep an eye out for one for sale. I am assuming having both currents is preferable?
Get more help with your processing questions and learn more about processing meat by subscribing to our waltonsinc.com youtube page at https://wltns.link/waltonstv I am a Gorilla, love yourself
-
RafterW Thanks! I will keep an eye out for one for sale. I am assuming having both currents is preferable?
Jonathon Hobart, the same company that makes industrial food machinery, also make some decent welders. The price point is close to Lincoln. They have a great welding school about 40 miles north of me. Most of the people going to the school have job offers before they graduate, and that was before the pandemic.
-
Thanks all.
I have a friend who is a certified welder that is going to build a free-standing rail system to hang from. Not really tall enough for trolley so going with rail hooks. Beef quarters will be hung with pulleys or some other means and a rolling work table to just lay them down on when ready to process. I’m a grandpa and have learned how to definitely work smarter and not harder.
Hopefully the compressor hasn’t crapped the bed on me. It had 2 when original, but the previous owner scrapped parts out of one. The company that made the cooler said one compressor and one evaporator will be enough for the size I have cut it down too.Still will have to make things like skinning cradles, benches, etc. Will take awhile to get the flow down and since this is only for family use it won’t get used more than two or three times a year but at least I won’t have to worry about the high price of meat! We’ve always had other’s butcher out stuff before but with all the small shops booked out through next year it’s time to take the plunge and butcher more than just deer
knifemaker3 man you have a good plan going. Congrats to you sir.
-
Jonathon Preferable, yes. AC will work just fine if a good deal on an AC225 welder comes up for you but DC is easier to stick weld with so it might be worth holding out for the AC/DC 225/125. The AC model has one dial on the face and the AC/DC has two dials on the face. Other than that, they look nearly identical.
-
I had a stick welder for many years and they work fine for many projects. Since I fabricate a lot of projects with thinner gauge steel and metal tubing, I decided to get a MIG welder a few years ago since they allow poor welders like me to do acceptable welds on thin steel and even sheet metal.
Hobart makes a good light duty one that runs on 120 volt AC. I ended up getting a similar model by Miller that will handle up to 3/8 " thick material but runs off of 220 volts.
With MIG welders you need a bottle of argon for the shield gas. You can also get flux core wire for it to do welding without the gas shield which works fine, but makes rougher looking beads.
I ended up selling the stick welder. -
bocephus I’m already working on how to convince my lovely wife that we really need one of these.
GWG8541 I was looking at a 20’ shipping container with a coolbot but I don’t have the room currently.
-
I had a stick welder for many years and they work fine for many projects. Since I fabricate a lot of projects with thinner gauge steel and metal tubing, I decided to get a MIG welder a few years ago since they allow poor welders like me to do acceptable welds on thin steel and even sheet metal.
Hobart makes a good light duty one that runs on 120 volt AC. I ended up getting a similar model by Miller that will handle up to 3/8 " thick material but runs off of 220 volts.
With MIG welders you need a bottle of argon for the shield gas. You can also get flux core wire for it to do welding without the gas shield which works fine, but makes rougher looking beads.
I ended up selling the stick welder.processhead I have a couple of machines, a Lincoln MP210 that gives me MIG, TIG, Stick and Spool Gun capability and I have my Miller Bobcat 225 with 12VS suitcase MIG. The Miller also give my a 10Kw generator when the power goes out for extended period. The buzz box just wasn’t suitable for my welding needs.
-
Lincoln and miller were the ones a friend of mine recommended as he was a welder by trade , he could pass ultrasound , x ray and was certified to weld on nuclear sadly cancer got him ,he could MiG, tig and stick, look at a weld and tell you what rod you used and he always said that a Lincoln or a miller were the best
-
GWG8541 I was looking at a 20’ shipping container with a coolbot but I don’t have the room currently.
bocephus I had a chance to pick up a shipping container a few years back and passed. Man do I regret that.
“You never really die until you end up on the wall at a Cracker Barrel”
-
bocephus I had a chance to pick up a shipping container a few years back and passed. Man do I regret that.
GWG8541 You don’t want to try to buy one now, the prices are outrageous. They used to be cheap.
-
bocephus I had a chance to pick up a shipping container a few years back and passed. Man do I regret that.
GWG8541 said in Walk in cooler about ready!:
bocephus I had a chance to pick up a shipping container a few years back and passed. Man do I regret that.
Wow…. That would have been cool. I don’t think my subdivision HOA would approve tho
-
Got the meat trolley all welded up thanks to my friend!
-
Got the meat trolley all welded up thanks to my friend!
knifemaker3 take some pics and post them when you have a chance. That is one cool project
-
GWG8541 said in Walk in cooler about ready!:
bocephus I had a chance to pick up a shipping container a few years back and passed. Man do I regret that.
Wow…. That would have been cool. I don’t think my subdivision HOA would approve tho
Dr_Pain the benefits of living on the outskirts.
-
Got the meat trolley all welded up thanks to my friend!
knifemaker3 congrats on the progress
. Let’s see some pictures. -
GWG8541 Wish I had more room, I would love to set up a shop that I didn’t have to pack everything away all the time.
-
Maybe hard to tell anything from the picture. Made to use hooks only instead of the rolling trolley type hooks. Didn’t have enough height for rolling
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register LoginSponsored By:
