25lb batch of Hot Links with Swiss Cheese
-
Beautiful day to stay inside here in Chicagoland as we are getting DUMPED on with rain.
Did 25lbs of pork Hot Links and added high-temp Swiss cheese. Decided to try a 3mm plate grind vs my usual coarser preference. I am still only grinding once as I fear a 2nd grind on my LEM #8 would suck and I’ve been pretty happy with the single grind product.
I added cure so plan to break in my new PK100 smoker with them tomorrow.
-
Beautiful day to stay inside here in Chicagoland as we are getting DUMPED on with rain.
Did 25lbs of pork Hot Links and added high-temp Swiss cheese. Decided to try a 3mm plate grind vs my usual coarser preference. I am still only grinding once as I fear a 2nd grind on my LEM #8 would suck and I’ve been pretty happy with the single grind product.
I added cure so plan to break in my new PK100 smoker with them tomorrow.
Jamieson22 Looks great, let us know how you like the finer grind
I am going up to the 10mm plate on my next rope sausage for more texture -
Beautiful day to stay inside here in Chicagoland as we are getting DUMPED on with rain.
Did 25lbs of pork Hot Links and added high-temp Swiss cheese. Decided to try a 3mm plate grind vs my usual coarser preference. I am still only grinding once as I fear a 2nd grind on my LEM #8 would suck and I’ve been pretty happy with the single grind product.
I added cure so plan to break in my new PK100 smoker with them tomorrow.
-
Fried up a few patties from the stuffer tube leftovers. Damn this is a tasty sausage!
I am pretty new to sausage making and have been buying all my mixes from Walton - figured I’d take recipe out of the equation and focus on process until I got good. Then plan was to begin making my own seasoning mixes for my batches. But have to say, I’ve been hugely impressed by how tasty the sausages I have made are and not sure why I’d want to mix up my own now.
-
Jamieson22 Looks great, let us know how you like the finer grind
I am going up to the 10mm plate on my next rope sausage for more textureglen said in 25lb batch of Hot Links with Swiss Cheese:
Jamieson22 Looks great, let us know how you like the finer grind
I am going up to the 10mm plate on my next rope sausage for more textureAfter like 5lbs I started regretting my decision. I turned grinder off and went to switch the plate to 6mm or 10mm but then figured I’ll never know unless I try. So went with 3mm the entire batch. Fingers crossed.
-
glen said in 25lb batch of Hot Links with Swiss Cheese:
Jamieson22 Looks great, let us know how you like the finer grind
I am going up to the 10mm plate on my next rope sausage for more textureAfter like 5lbs I started regretting my decision. I turned grinder off and went to switch the plate to 6mm or 10mm but then figured I’ll never know unless I try. So went with 3mm the entire batch. Fingers crossed.
Jamieson22 Yeah, I made 5 lb. of 3mm last week. Even partly frozen was a PITA
Turns out my in-laws really liked the sausage but voted for more particle definition -
I use the LEM #8. Double grind isn’t that bad if you don’t mix your seasoning in until after grinding and keep it cold. If you mix your seasoning in before you grind, it gets pretty sticky by the second grind and you are constantly on the plunger. I just did #20 today through the 3/8” plate then the 3/16”. Went pretty quick.
The hot links look great.
-
Beautiful day to stay inside here in Chicagoland as we are getting DUMPED on with rain.
Did 25lbs of pork Hot Links and added high-temp Swiss cheese. Decided to try a 3mm plate grind vs my usual coarser preference. I am still only grinding once as I fear a 2nd grind on my LEM #8 would suck and I’ve been pretty happy with the single grind product.
I added cure so plan to break in my new PK100 smoker with them tomorrow.
So my first run in the PK100 just kicked off. Currently drying at 110F.
The full batch (25lb butt/2.5lb cheese/5c water/seasoning in 35-38mm casings) fit. Had a few stray singles that I tried to hook - not sure if these will hold. Also since these are paired links they kind of overlap each other at the bottom - again not sure what I can do.
Also having to run it in the garage. We have had CRAZY storms this week and don’t want to be stuck in one. Figure if no rain I’ll open windows for cross-breeze, else rig a fan to blow smoke out.
-
So my first run in the PK100 just kicked off. Currently drying at 110F.
The full batch (25lb butt/2.5lb cheese/5c water/seasoning in 35-38mm casings) fit. Had a few stray singles that I tried to hook - not sure if these will hold. Also since these are paired links they kind of overlap each other at the bottom - again not sure what I can do.
Also having to run it in the garage. We have had CRAZY storms this week and don’t want to be stuck in one. Figure if no rain I’ll open windows for cross-breeze, else rig a fan to blow smoke out.
Jamieson22 Off and running! Good luck
-
So my first run in the PK100 just kicked off. Currently drying at 110F.
The full batch (25lb butt/2.5lb cheese/5c water/seasoning in 35-38mm casings) fit. Had a few stray singles that I tried to hook - not sure if these will hold. Also since these are paired links they kind of overlap each other at the bottom - again not sure what I can do.
Also having to run it in the garage. We have had CRAZY storms this week and don’t want to be stuck in one. Figure if no rain I’ll open windows for cross-breeze, else rig a fan to blow smoke out.
Jamieson22 meat looks good, but I’m disappointed in ProSmokers caulk sealant job around the door seal and bottom of smoker. Sorry I’m just a little OCD. After 2 years of service of my smoker I am currently as I type this cutting out the loose caulk and resealing mine
-
Boy I know the OCD lol. My Masterbuild door leaks around one edge so I’m dealing the whole door. Not only so it does not leak but so the seal looks the same all the way around.
-
Jamieson22 meat looks good, but I’m disappointed in ProSmokers caulk sealant job around the door seal and bottom of smoker. Sorry I’m just a little OCD. After 2 years of service of my smoker I am currently as I type this cutting out the loose caulk and resealing mine
twilliams said in 25lb batch of Hot Links with Swiss Cheese:
Jamieson22 meat looks good, but I’m disappointed in ProSmokers caulk sealant job around the door seal and bottom of smoker. Sorry I’m just a little OCD. After 2 years of service of my smoker I am currently as I type this cutting out the loose caulk and resealing mine
Hopefully it is ugly but functional as there is little I hate more than redoing caulk.
Currently nearing 5 hours in the smokehouse and sitting at 170F with both dampers shut. Links seem to have hit a big stall at 138F as they have not budged in some time. I opened it up to remove the sawdust pan from the burner and took a quick pic. Not super pretty yet, that’s for sure!
-
Beautiful day to stay inside here in Chicagoland as we are getting DUMPED on with rain.
Did 25lbs of pork Hot Links and added high-temp Swiss cheese. Decided to try a 3mm plate grind vs my usual coarser preference. I am still only grinding once as I fear a 2nd grind on my LEM #8 would suck and I’ve been pretty happy with the single grind product.
I added cure so plan to break in my new PK100 smoker with them tomorrow.
Jamieson22
Links look great! Good luck with the smoke. -
Beautiful day to stay inside here in Chicagoland as we are getting DUMPED on with rain.
Did 25lbs of pork Hot Links and added high-temp Swiss cheese. Decided to try a 3mm plate grind vs my usual coarser preference. I am still only grinding once as I fear a 2nd grind on my LEM #8 would suck and I’ve been pretty happy with the single grind product.
I added cure so plan to break in my new PK100 smoker with them tomorrow.
Jamieson22 - Looks great
-
twilliams said in 25lb batch of Hot Links with Swiss Cheese:
Jamieson22 meat looks good, but I’m disappointed in ProSmokers caulk sealant job around the door seal and bottom of smoker. Sorry I’m just a little OCD. After 2 years of service of my smoker I am currently as I type this cutting out the loose caulk and resealing mine
Hopefully it is ugly but functional as there is little I hate more than redoing caulk.
Currently nearing 5 hours in the smokehouse and sitting at 170F with both dampers shut. Links seem to have hit a big stall at 138F as they have not budged in some time. I opened it up to remove the sawdust pan from the burner and took a quick pic. Not super pretty yet, that’s for sure!
Jamieson22 they are looking good. They will bloom a bit after they get pulled and rest.
-
Jamieson22 they are looking good. They will bloom a bit after they get pulled and rest.
So, interesting cook yesterday for sure. After 7+ hours the sausages did not get above 141F even with bumping up from 170F to 180F cook temp. In fact, at one point link temp dropped from 140F to 135F. Was odd as prior to that the temp seemed to be FLYING up to 130F or so. I had probed a sausage in the middle of top rack with my Thermoworks Smoke and verified some others with my Thermapen.
Running out of time for the night I fired up my P&S pellet smoker to 180F and transferred them over to it. This finished them up in a 90 minutes or so.
Not really sure if there was an issue with the cook or if I just needed to be more patient. Been doing BBQ a LONG time so know all about stalls, just not often I see temps drop like that. Worried the PK100 does not have enough power to do 25lbs. What would you all with more experience expect a 25lb batch of pork 35-38mm to take?
I did grill one up after the ice bath for dinner and they were fantastic in taste. Great kick and I really like this hi-temp swiss. It doesn’t really give a string swiss cheese flavor, but adds a great creamy/cheesy edge to the bite.
-
Jamieson22 First, how was the tornado? How odd to hear Chicago getting hit with a tornado! 2nd I am going to guess that you had what is known as case hardening. This is when the outside of the sausage cooks and or dries too quickly (you said it flew up to 130) and then it can no longer pass heat into the center of the sausage efficiently. This is the cause of most marathon smoking sessions on something like a sausage. My suggestion would be to do the automotive sponge trick in your PK. Having a lot of humidity in there should prevent this from happening and it should speed up your cook in the future.
Get more help with your processing questions and learn more about processing meat by subscribing to our waltonsinc.com youtube page at https://wltns.link/waltonstv I am a Gorilla, love yourself
-
Jamieson22 First, how was the tornado? How odd to hear Chicago getting hit with a tornado! 2nd I am going to guess that you had what is known as case hardening. This is when the outside of the sausage cooks and or dries too quickly (you said it flew up to 130) and then it can no longer pass heat into the center of the sausage efficiently. This is the cause of most marathon smoking sessions on something like a sausage. My suggestion would be to do the automotive sponge trick in your PK. Having a lot of humidity in there should prevent this from happening and it should speed up your cook in the future.
Jonathon said in 25lb batch of Hot Links with Swiss Cheese:
Jamieson22 First, how was the tornado? How odd to hear Chicago getting hit with a tornado! 2nd I am going to guess that you had what is known as case hardening. This is when the outside of the sausage cooks and or dries too quickly (you said it flew up to 130) and then it can no longer pass heat into the center of the sausage efficiently. This is the cause of most marathon smoking sessions on something like a sausage. My suggestion would be to do the automotive sponge trick in your PK. Having a lot of humidity in there should prevent this from happening and it should speed up your cook in the future.
The weather around here has been nuts. Can’t remember a time I’ve seen this much rain and crazy storms. Luckily no tornado in my immediate area though we did get a nice 1145pm wakeup call by a blaring tornado siren last week. Scary stuff.
Watched the video on wicking towel. In general I’d still do 1 hour at 120F to dry, then add the wet sawdust pan and put on burner. Should I also add the water at this point or after the smoke is done? Any advice on a good water pan to use? It does look like I’ll lose quite a bit of room in smoker with a water pan on drip tray and the towel on rack above. Could it be rigged with water pan on burner and towel on drip tray?
Also, after I make the sausage I usually clean the meat lug, add a plastic lug liner, toss all the sausage in, close up the liner and put lid on, and toss in fridge overnight. Next morning I add it to smoker right from the lug so it is usually fairly wet/cold - even if it has been on counter an hour or two. Should I dry it off a bit better and let it warm up at room temp or just extend drying phase a touch?
-
if you load your smoker with cold not room temp. meat it will increase the drying time and take longer to get up to Temp, and in the end affect your cook time
-
Jonathon said in 25lb batch of Hot Links with Swiss Cheese:
Jamieson22 First, how was the tornado? How odd to hear Chicago getting hit with a tornado! 2nd I am going to guess that you had what is known as case hardening. This is when the outside of the sausage cooks and or dries too quickly (you said it flew up to 130) and then it can no longer pass heat into the center of the sausage efficiently. This is the cause of most marathon smoking sessions on something like a sausage. My suggestion would be to do the automotive sponge trick in your PK. Having a lot of humidity in there should prevent this from happening and it should speed up your cook in the future.
The weather around here has been nuts. Can’t remember a time I’ve seen this much rain and crazy storms. Luckily no tornado in my immediate area though we did get a nice 1145pm wakeup call by a blaring tornado siren last week. Scary stuff.
Watched the video on wicking towel. In general I’d still do 1 hour at 120F to dry, then add the wet sawdust pan and put on burner. Should I also add the water at this point or after the smoke is done? Any advice on a good water pan to use? It does look like I’ll lose quite a bit of room in smoker with a water pan on drip tray and the towel on rack above. Could it be rigged with water pan on burner and towel on drip tray?
Also, after I make the sausage I usually clean the meat lug, add a plastic lug liner, toss all the sausage in, close up the liner and put lid on, and toss in fridge overnight. Next morning I add it to smoker right from the lug so it is usually fairly wet/cold - even if it has been on counter an hour or two. Should I dry it off a bit better and let it warm up at room temp or just extend drying phase a touch?
Jamieson22 maybe I missed it in the comments but I’m gonna ask, did you get the smoker cabinet up to temp before filling with sausage? I find it better to preheat to 250* before adding sausage so by the time you open the door, load the sausage and shut the door to start your drying phase the inside temp will be about 110* right away to start rather than having a cold cabinet and cold meat on top of it.
Also did you have it on the 1250 watt setting the entire time from start to finish?
My bigger unit takes about 7 hours for 25 lbs of product, maybe your single burner will take some time longer but I wouldn’t think much longer with how well insulated these units are
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register LoginSponsored By:
