Home meat processing shop
-
calldoctoday fair point. They will all be enclosed in waterproof/ outdoor covers and not exposed. They are also placed well above table tops. There is also no running water in the shop. Water will be brought in by the bucket and hot cleaning will be done with a steamer. We made need to make that change sometime, especially if/ when I add running water. We did leave plenty of wire for down the road. Not everything will be ideal right away for sure. For now I’ll have to exercise caution in some areas, including this one.
Deepwoodsbutcher I think you should still put in GFIs, even without running water, you will still use water for cleaning.
-
When wired in correctly, you need only one GFCI receptacle on each circuit. All the other regular receptacles are then protected by the first GFCI. It makes it much less work to bring everything up to code.
GFCI receptacles are also cheaper than GFCI breakers.
processhead thank you for this! Seems like an easy enough solution. I’m sure my husband can make that change. We are definitely not electricians lol. This is what makes this site so great. A lot of different experience and knowledge. Thank you all for the ideas! I definitely want things to be safe.
-
Deepwoodsbutcher I think you should still put in GFIs, even without running water, you will still use water for cleaning.
bocephus said in Home meat processing shop:
Deepwoodsbutcher I think you should still put in GFIs, even without running water, you will still use water for cleaning.
The code doesn’t only require GFCI protection for areas with running water. All kitchen counter receptacles are required to have them whether close to a sink or not.
As little expense and labor as it would take to add them, I would agree that they are a good idea.Paul
-
processhead thank you for this! Seems like an easy enough solution. I’m sure my husband can make that change. We are definitely not electricians lol. This is what makes this site so great. A lot of different experience and knowledge. Thank you all for the ideas! I definitely want things to be safe.
Deepwoodsbutcher I agree with you regarding the people in this site are wonderful on food prep and building whatever. They just want their food with taste and the materials to be safe. Yay for all.
-
Deepwoodsbutcher I think you should still put in GFIs, even without running water, you will still use water for cleaning.
bocephus said in Home meat processing shop:
Deepwoodsbutcher I think you should still put in GFIs, even without running water, you will still use water for cleaning.
I’ll bet if you check into your local codes you might be required to.
Also are your outlets wired so there will be no open neutrals? -
bocephus said in Home meat processing shop:
Deepwoodsbutcher I think you should still put in GFIs, even without running water, you will still use water for cleaning.
The code doesn’t only require GFCI protection for areas with running water. All kitchen counter receptacles are required to have them whether close to a sink or not.
As little expense and labor as it would take to add them, I would agree that they are a good idea.processhead Don’t get me quoting code, but I am with you.
-
You better consult your local inspectors!
-
processhead thank you for this! Seems like an easy enough solution. I’m sure my husband can make that change. We are definitely not electricians lol. This is what makes this site so great. A lot of different experience and knowledge. Thank you all for the ideas! I definitely want things to be safe.
Deepwoodsbutcher We want to save you & your family’s life if we can. Don 't let me scare you though, that is not the intent.
-
bocephus said in Home meat processing shop:
Deepwoodsbutcher I think you should still put in GFIs, even without running water, you will still use water for cleaning.
The code doesn’t only require GFCI protection for areas with running water. All kitchen counter receptacles are required to have them whether close to a sink or not.
As little expense and labor as it would take to add them, I would agree that they are a good idea.processhead I have no counters. Just tables. And only one outlet sits directly above a table top. Should be able to change it out no problem.
-
Don’t get me wrong, the electrical isn’t finished yet. I’m not the one doing it, so I’m not positive about the plan. The box might have the gfci breakers, I just don’t know myself. I’ll pass along some of your concerns. As it is, there is no power being run since the trailer is unplugged. It’s just a work in progress. We always err on the side of caution with these things as my husband and myself are both safety conscious people. In fact the shop is already equipped with a fire extinguisher and first aid kit. Everything will be checked and double checked before use.
-
A little bit of progress on the shop today. Hit a few snags recently, but we are back on track. I have a beef scheduled for next weekend so we are trying to wrap up the cooler. I think it looks pretty good so far.
-
A little bit of progress on the shop today. Hit a few snags recently, but we are back on track. I have a beef scheduled for next weekend so we are trying to wrap up the cooler. I think it looks pretty good so far.
Deepwoodsbutcher it’s looking great
. Are you using the cool bot? -
Deepwoodsbutcher it’s looking great
. Are you using the cool bot?cdavis yes, it’s a coolbot setup. It works great for me. Gets beef quarters below 40*f in less than 24 hrs. The cooler is about 7’x7’ inside, with 6" of foam insulation.
-
cdavis yes, it’s a coolbot setup. It works great for me. Gets beef quarters below 40*f in less than 24 hrs. The cooler is about 7’x7’ inside, with 6" of foam insulation.
Deepwoodsbutcher I really want to build a cooler. Seeing yours makes me want one even more. Thanks for sharing your venture. Can’t wait to see it with a beef in there.
-
Deepwoodsbutcher I really want to build a cooler. Seeing yours makes me want one even more. Thanks for sharing your venture. Can’t wait to see it with a beef in there.
cdavis said in Home meat processing shop:
Deepwoodsbutcher I really want to build a cooler. Seeing yours makes me want one even more. Thanks for sharing your venture. Can’t wait to see it with a beef in there.
Here’s one I did before the panels were in
-
cdavis yes, it’s a coolbot setup. It works great for me. Gets beef quarters below 40*f in less than 24 hrs. The cooler is about 7’x7’ inside, with 6" of foam insulation.
Deepwoodsbutcher One can only dream to have that type of space. Way to go.
-
cdavis said in Home meat processing shop:
Deepwoodsbutcher I really want to build a cooler. Seeing yours makes me want one even more. Thanks for sharing your venture. Can’t wait to see it with a beef in there.
Here’s one I did before the panels were in
Deepwoodsbutcher awesome I like your hanging racks. Thanks
-
Deepwoodsbutcher One can only dream to have that type of space. Way to go.
zbigjeff thanks. It is above and beyond what I had hoped for. My husband definitely has the mindset that if your going to do it, do it right. I’m really happy with the results.
-
Deepwoodsbutcher awesome I like your hanging racks. Thanks
cdavis said in Home meat processing shop:
Deepwoodsbutcher awesome I like your hanging racks. Thanks
Thank you. We built beam pockets into the wall and found these heavy duty pipes to use as railing. It works well.
-
zbigjeff thanks. It is above and beyond what I had hoped for. My husband definitely has the mindset that if your going to do it, do it right. I’m really happy with the results.
Deepwoodsbutcher When it’s 99% done, I would be standing there smiling widely. I know you will also.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register LoginSponsored By:
