Labeling Vacuum Seal Bags?
-
HerbcoFood Ink-jet ink will definitely disappear, most is soy based and once it gets wet it starts to bleed.
johnsbrewhouse What’s awesome with the laser printer is the letters float around in the water.
-
My typical process for snack sticks and hotdogs is after slow cooking to vacuum seal the product and then sous vide to finish them. Would printing a business card size label, then hot laminate them, and place them inside the vacuum bag prior to sealing and sous vide’ing them work? Is it okay to have the laminate material touch the product? Would it hold up to the sous vide and ice bath process? Better ideas for labeling vacuum seal bags?
Thanks,
RyanGood N You I just use a permanent marker and write on the bag before putting material in, has always worked fine for me.
-
I write on the bag with a sharpie before I vacuum seal and it stays there just fine I use a little bigger bag so I have a spot where it seals that stays flat
gus4416 said in Labeling Vacuum Seal Bags?:
I write on the bag with a sharpie before I vacuum seal and it stays there just fine I use a little bigger bag so I have a spot where it seals that stays flat
Same here but usually after I vac the bag.
-
Thank you for the responses. I too am using a Sharpie, but every time I do I would think that there must be a better way to look more professional and take less time. Writing “Venison Sweet Maple Bacon - 10/2021”, “Venison Jalapeno Cheese - 10/2021” or “Wild Turkey Honey BBQ - 10/2021” on 25# worth of vacuum bags is time consuming, and not really the look I would like when sharing with others. I will try the Avery Labels, I had concern they would fall off in the freezer over time, but sounds like they don’t per HerbcoFood.
I have brought some of my venison to a processing shop in years past and their packages have a card inside the vacuum bag identifying the product. Wasn’t sure if anyone has seen the same before, and knew how to mimic this without having to order them.
-
Thank you for the responses. I too am using a Sharpie, but every time I do I would think that there must be a better way to look more professional and take less time. Writing “Venison Sweet Maple Bacon - 10/2021”, “Venison Jalapeno Cheese - 10/2021” or “Wild Turkey Honey BBQ - 10/2021” on 25# worth of vacuum bags is time consuming, and not really the look I would like when sharing with others. I will try the Avery Labels, I had concern they would fall off in the freezer over time, but sounds like they don’t per HerbcoFood.
I have brought some of my venison to a processing shop in years past and their packages have a card inside the vacuum bag identifying the product. Wasn’t sure if anyone has seen the same before, and knew how to mimic this without having to order them.
Good N You I have only been using the labels since March so I don’t have a good length of time to tell you if they stay on or not. I also only put them on flat surfaces.
-
My typical process for snack sticks and hotdogs is after slow cooking to vacuum seal the product and then sous vide to finish them. Would printing a business card size label, then hot laminate them, and place them inside the vacuum bag prior to sealing and sous vide’ing them work? Is it okay to have the laminate material touch the product? Would it hold up to the sous vide and ice bath process? Better ideas for labeling vacuum seal bags?
Thanks,
RyanGood N You I have been using a DYMO LabelWriter 450 Twin Turbo for years. I do get the waterproof labels that are a polyester base label.
They look professional, they stick very well under all conditions, and can peel off most surfaces fairly easy.
The labels come in many different sizes. I use small ones for personal use, larger ones for sale and gifts.
The one thing I have learned over the years is that it doesn’t go into the freezer or storage without a label and date. Saves me from issues as time goes by.
I place them on my vacuum bags prior to filling and canning jars after processing.
I have gotten two on eBay and can usually fine one with labels fairly cheap.
-
Good N You I have been using a DYMO LabelWriter 450 Twin Turbo for years. I do get the waterproof labels that are a polyester base label.
They look professional, they stick very well under all conditions, and can peel off most surfaces fairly easy.
The labels come in many different sizes. I use small ones for personal use, larger ones for sale and gifts.
The one thing I have learned over the years is that it doesn’t go into the freezer or storage without a label and date. Saves me from issues as time goes by.
I place them on my vacuum bags prior to filling and canning jars after processing.
I have gotten two on eBay and can usually fine one with labels fairly cheap.
Chef As a side note. Yesterday you were asking about the “users” icon. If you scroll to the bottom of any post where it shows who is on line at that time, there is in parenthesis, (See Full List) and if you click on that you can see all Meatigistics users by clicking on USERS. You can also use the search to find someone.
Improvise, Adapt and Overcome! Semper Fi
-
Chef As a side note. Yesterday you were asking about the “users” icon. If you scroll to the bottom of any post where it shows who is on line at that time, there is in parenthesis, (See Full List) and if you click on that you can see all Meatigistics users by clicking on USERS. You can also use the search to find someone.
-
Good N You I have been using a DYMO LabelWriter 450 Twin Turbo for years. I do get the waterproof labels that are a polyester base label.
They look professional, they stick very well under all conditions, and can peel off most surfaces fairly easy.
The labels come in many different sizes. I use small ones for personal use, larger ones for sale and gifts.
The one thing I have learned over the years is that it doesn’t go into the freezer or storage without a label and date. Saves me from issues as time goes by.
I place them on my vacuum bags prior to filling and canning jars after processing.
I have gotten two on eBay and can usually fine one with labels fairly cheap.
Chef They look really good, might have to look into one.
-
Good N You I have been using a DYMO LabelWriter 450 Twin Turbo for years. I do get the waterproof labels that are a polyester base label.
They look professional, they stick very well under all conditions, and can peel off most surfaces fairly easy.
The labels come in many different sizes. I use small ones for personal use, larger ones for sale and gifts.
The one thing I have learned over the years is that it doesn’t go into the freezer or storage without a label and date. Saves me from issues as time goes by.
I place them on my vacuum bags prior to filling and canning jars after processing.
I have gotten two on eBay and can usually fine one with labels fairly cheap.
Chef if you dont mind what did the setup cost
-
Good N You I have been using a DYMO LabelWriter 450 Twin Turbo for years. I do get the waterproof labels that are a polyester base label.
They look professional, they stick very well under all conditions, and can peel off most surfaces fairly easy.
The labels come in many different sizes. I use small ones for personal use, larger ones for sale and gifts.
The one thing I have learned over the years is that it doesn’t go into the freezer or storage without a label and date. Saves me from issues as time goes by.
I place them on my vacuum bags prior to filling and canning jars after processing.
I have gotten two on eBay and can usually fine one with labels fairly cheap.
Chef Thank you Chef! I was hoping someone had a nice setup they would share. I am going to push the limits with it though, and try to put a couple labels on a flat bag before the sous vide process, and then try some labels after the sous vide and ice bath cooling process. Will dry off the bags and stick the labels on. Ideally I would like to put them on when the bag is flat for best stick, just unsure how they would hold up through the rest of the process. Thanks again!
-
craigrice I got the printer for about $35.00, I get my labels from “Label Value” seem to have the best prices. The Dymo printer has software that runs from your PC, very easy to use.
There are a couple on eBay now for the $30 to $40 range. When I’m looking for something on eBay, I place a search and get a new listing each morning. Best when I’m looking for a deal.
-
Chef Thank you Chef! I was hoping someone had a nice setup they would share. I am going to push the limits with it though, and try to put a couple labels on a flat bag before the sous vide process, and then try some labels after the sous vide and ice bath cooling process. Will dry off the bags and stick the labels on. Ideally I would like to put them on when the bag is flat for best stick, just unsure how they would hold up through the rest of the process. Thanks again!
Good N You I’m not sure just at what temperature, but in a ultra hot dishwasher and heated drying, the print does come off. It does not at microwave temperatures, so the sous vide process just may work.
-
Chef Thank you Chef! I was hoping someone had a nice setup they would share. I am going to push the limits with it though, and try to put a couple labels on a flat bag before the sous vide process, and then try some labels after the sous vide and ice bath cooling process. Will dry off the bags and stick the labels on. Ideally I would like to put them on when the bag is flat for best stick, just unsure how they would hold up through the rest of the process. Thanks again!
Good N You Let us know the results of your experiments.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register LoginSponsored By:
