QUESTION: How do you handle the leftover mince in the stuffer???
-
As the title say, what do you guys do with the left over mince?
I normally keep a small batch for pH testing purposes and try to hand stuff the rest in the casing but I am sure that there might be a less labor intensive way to handle this problem? (I HATE wasting stuff!!)
Can you just take it, bag it and freeze it to combine with the next batch OR is it not possible to do that especially if you mix in ECA and or fermenting cultures like Bactoferm LHP etc…)
-
twilliams said in QUESTION: How do you handle the leftover mince in the stuffer???:
Dr_Pain i use my jerky shooter which is basically an oversized caulk gun made for ground meat formed jerky. Depending on what im making i will use a tube for bratwurst or a tube for summer sausage.
Now that is an interesting idea but then again you have mince in the tube (definitely not as much waste though)
Dr_Pain as others have suggested I use a tool to get the rest of the meat out the horn into the casing.
-
Dr_Pain as others have suggested I use a tool to get the rest of the meat out the horn into the casing.
-
I gotta jump on the Patty bandwagon. Not as a test so much as a snack. After spinning the stuffer, I wanna eat! I usually do a test right after I mix to adjust seasoning. I haven’t progressed to fermentation yet (other than wine) so it hasn’t affected me that way.
-
twilliams I wad up a piece of paper towel and push it through the horn with the handle on a wooden spoon. Then twist off the sausage in front of the paper wad. Perfecto
Brianzipperdog123 yep, thats what i do too
-
I also use the dowel method to push out the remainder of the horn. The leftover in the throat before it gets to the horn is the problem…either slowly feed it into the horn and push it out (trapped air becomes an issue though), make it as a patty, save it for eggs the next day or toss it.
-
All kinds of good ideas!!! The next area of deal with is the oversized elbow that is on the stuffer. If I would have done some research I could have seen how frustrating some of those designs are. I may have an idea based on some of your suggestions though. I will keep you posted
-
All kinds of good ideas!!! The next area of deal with is the oversized elbow that is on the stuffer. If I would have done some research I could have seen how frustrating some of those designs are. I may have an idea based on some of your suggestions though. I will keep you posted
Dr_Pain said in QUESTION: How do you handle the leftover mince in the stuffer???:
All kinds of good ideas!!! The next area of deal with is the oversized elbow that is on the stuffer. If I would have done some research I could have seen how frustrating some of those designs are. I may have an idea based on some of your suggestions though. I will keep you posted
My earlier post addresses this issue as well as meat left in the stuffer tube. I have only tried it once, and would like to hear from others whether it works for them.
-
Well, thinking about sending a “bolus” down the stuffer to clear the elbow (since clearing the horn is a lot easier), I decided to use my physical therapy background to my advantage. I will experiment with some tear resistant pliable/malleable stress ball (Non-Toxic, BPA/Phthalate/Latex-Free thermoplastic rubber) that we use with hand therapy and for sensory integration with our Down’s patient. Send one or 2 down the stuffer and press it to the horn. They clean up and can be sanitized easily. Should be an interesting experiment!!!
-
Well, thinking about sending a “bolus” down the stuffer to clear the elbow (since clearing the horn is a lot easier), I decided to use my physical therapy background to my advantage. I will experiment with some tear resistant pliable/malleable stress ball (Non-Toxic, BPA/Phthalate/Latex-Free thermoplastic rubber) that we use with hand therapy and for sensory integration with our Down’s patient. Send one or 2 down the stuffer and press it to the horn. They clean up and can be sanitized easily. Should be an interesting experiment!!!
Dr_Pain
Let us know how the stress ball works. I was trying to finds something to uses that was compressible, flexible, non toxic and cheap. Cooked rice was all I could come up with, but no doubt there are better options out there. -
I roll/flatten the left overs between some parchment paper cur with a pizza cutter and make reconstructed jerky sticks, zero wasted.
-
I roll/flatten the left overs between some parchment paper cur with a pizza cutter and make reconstructed jerky sticks, zero wasted.
JPAP said in QUESTION: How do you handle the leftover mince in the stuffer???:
I roll/flatten the left overs between some parchment paper cur with a pizza cutter and make reconstructed jerky sticks, zero wasted.
That is a great idea!!!
-
I roll/flatten the left overs between some parchment paper cur with a pizza cutter and make reconstructed jerky sticks, zero wasted.
JPAP that is a great idea! Perfect way to get some extra jerky!!!
-
Well my little experiment was a success!! The last pic shows how squishy. The amount of mince left over was little and was a breeze to stuff through the horn
-
Well my little experiment was a success!! The last pic shows how squishy. The amount of mince left over was little and was a breeze to stuff through the horn
Dr_Pain congrats, Looks like you may have nailed it.
I see squishy balls are non toxic and besides they will not contact the mince for long -
Well my little experiment was a success!! The last pic shows how squishy. The amount of mince left over was little and was a breeze to stuff through the horn
Dr_Pain great job Dr. Scientist
-
Well my little experiment was a success!! The last pic shows how squishy. The amount of mince left over was little and was a breeze to stuff through the horn
Dr_Pain that looks like the best option so far. Looks like I need to visit the PT folks where I work. Thanks for sharing.
“You never really die until you end up on the wall at a Cracker Barrel”
-
Dr_Pain Squishy for the win! From now on I will be saving my rice for the gumbo .
-
Well my little experiment was a success!! The last pic shows how squishy. The amount of mince left over was little and was a breeze to stuff through the horn
Dr_Pain Looks like a good process, how do you clean it when done?
-
Dr_Pain congrats, Looks like you may have nailed it.
I see squishy balls are non toxic and besides they will not contact the mince for longglen said in QUESTION: How do you handle the leftover mince in the stuffer???:
Dr_Pain congrats, Looks like you may have nailed it.
I see squishy [censored] are non toxic and besides they will not contact the mince for longI did clean them and sanitize them with iodophor before using them so since they are thermoplastic the likelihood of a cross contamination is small. They are Non-Toxic, BPA/Phthalate/Latex-Free so… worse case scenario and the get pinched or split and I lose a small chunk into the mince I can fish it out and all is well.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register LoginSponsored By:
