Gardening, canning, pickling and everything related
-
I’ve always firm grip tighten the lids not loosely snuged down.
LOL Copy on the agreement! I do most of the cooking here.
-
Tex_77 we couldn’t find ball lids so had to use another kind. Do you know what caused this during the hot water bath. 7 out of the 36 did this.
cdavis have never encountered that
Isaiah 5:22 Woe to those who are heroes at drinking wine and champions at mixing drinks
-
Tex_77 thanks for the response
-
Surg interesting. I wonder if thats the tops that @DennyO uses. Have you used them before surg?
kyle @DennyO
Yeah looks very similar. Have used these for a while now. They work great in my opinion. There is a glass disc in there right on top of shredded cabbage. I like the idea of using a full leaf to keep it all submerged. Will try that next batch. -
Tex_77 we couldn’t find ball lids so had to use another kind. Do you know what caused this during the hot water bath. 7 out of the 36 did this.
cdavis Usually either too full or boiled too hard when processing, another thing could be rings were too tight initially.
-
cdavis Usually either too full or boiled too hard when processing, another thing could be rings were too tight initially.
bocephus the head space was good. It looks like a combination of cheaper lids than she is used to and rings a little too tight. Thanks for your response
-
I have bought the seals online and they did not preform as well as the name brand and were used in the same process as the others
-
Tex_77 we couldn’t find ball lids so had to use another kind. Do you know what caused this during the hot water bath. 7 out of the 36 did this.
cdavis I’ve been asking some folks who have been canning longer than I’ve been alive and none of them has seen a lid act like that. At first I was thinking there may not have been enough air gap at top and the tomatoes bubbled or expanded a little during the bath, but from your pics, there seems to be plenty of air on top. It sounds like a defective lid.
“You never really die until you end up on the wall at a Cracker Barrel”
-
cdavis I’ve been asking some folks who have been canning longer than I’ve been alive and none of them has seen a lid act like that. At first I was thinking there may not have been enough air gap at top and the tomatoes bubbled or expanded a little during the bath, but from your pics, there seems to be plenty of air on top. It sounds like a defective lid.
GWG8541 your right the head space was good. I think the lids are junk but that is all we could get. Maybe she had the rings a little tight. She was in the process of redoing them when I left for work this evening. I’ll know the verdict when I get home in the morning. Thanks for your input.
-
bocephus the head space was good. It looks like a combination of cheaper lids than she is used to and rings a little too tight. Thanks for your response
cdavis I have had the same problem this year with the off brand lids.I also had some that you can not get the bands off without popping the lids.I did notice with mine if I used the new lids with the real ball bands that I didnt have that problem.Maybe just luck
-
cdavis I have had the same problem this year with the off brand lids.I also had some that you can not get the bands off without popping the lids.I did notice with mine if I used the new lids with the real ball bands that I didnt have that problem.Maybe just luck
RON PARRISH well we found out that it is the lids. She had to redo 13 of the 36 quarts. Being careful not to put the rings on too tight still had 3 lids do the same thing. She’s frustrated but on the bright side I have 3 quarts of spicy v8 in the fridge that I have to consume before it goes bad.
-
cdavis I have had the same problem this year with the off brand lids.I also had some that you can not get the bands off without popping the lids.I did notice with mine if I used the new lids with the real ball bands that I didnt have that problem.Maybe just luck
RON PARRISH thanks for the tip about the ball bands. I’ll pass that on to her.
-
Does anyone here can potatoes? We had a good crop this year and was thinking about trying it. I found a recipe in the ball book, but would like to know if people do it and how they turn out.
-
cdavis over-pressure. The pressure didn’t bleed off through the seal. Were the bands to tight?
johnsbrewhouse Perhaps combined with not enough head space?
-
RON PARRISH well we found out that it is the lids. She had to redo 13 of the 36 quarts. Being careful not to put the rings on too tight still had 3 lids do the same thing. She’s frustrated but on the bright side I have 3 quarts of spicy v8 in the fridge that I have to consume before it goes bad.
cdavis What lid brand did you use? Same band brand? We have used the Walmart brand a lot when Ball or Kerr was not available, for the most part have not had a problem with just a few exceptions. Definitely not that, even when I made my King Creole Sauce & some other troublesome projects. King Creole actually never gave me a problem, but some other Marinara type sauces have. Mainly the leaking thing or band completely unscrewing & thus total blowout, but that was fairly rare.
-
the internet seals are of a thinner gauge than the standard
-
johnsbrewhouse Perhaps combined with not enough head space?
calldoctoday usually the headspace problem will blow out the excess, but if the seal won’t let it out then yes it could be part of the cause.
-
cdavis What lid brand did you use? Same band brand? We have used the Walmart brand a lot when Ball or Kerr was not available, for the most part have not had a problem with just a few exceptions. Definitely not that, even when I made my King Creole Sauce & some other troublesome projects. King Creole actually never gave me a problem, but some other Marinara type sauces have. Mainly the leaking thing or band completely unscrewing & thus total blowout, but that was fairly rare.
calldoctoday the only lids we could find shipped from China. They were really thin and didn’t have much for a seal on them. If we ever find the ball or Kerr lids again we’re going to stock up.
-
Found another problem with some off-brand lids.
I sometime shake my cold pack jars to stir up the seasonings, when I spun the jar while shaking I got a slice in my finger from the lids sharp edge
Edit to say In my finger not through it LOL -
Found another problem with some off-brand lids.
I sometime shake my cold pack jars to stir up the seasonings, when I spun the jar while shaking I got a slice in my finger from the lids sharp edge
Edit to say In my finger not through it LOLglen Whoa, that’s not good!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register LoginSponsored By:
