Cast iron cooking
-
processhead Thanks for posting this link. Had not thought of this method but think I’ll try it on my old Griswold.
-
RJ Adventures said in Cast iron cooking:
zbigjeff what did you do to clean them up? Only have a couple cast iron and both are lodge, one is a 10" skillet and I have a smaller griddle plate for camping to throw across the outdoor kitchen stove
For restoring really rusty dirty cast iron, I am definitely sold on the electrolysis method for cleaning cast iron. All you need is an automotive type battery charger, a container large enough for the item, and Arm and Hammer washing soda. When finished you just need to season the item.
processhead yes a lot easier than elbow grease. One of our daily pieces is a 10 " Japanese piece that we found on our property, days of daily scrubbing to get it cleaned up. With that operation we could have let chemistry do the work.
-
@ndmike There’s a following on this site for these gems. I have about 8-10 of them (12,11,10,8,6,4 skillets; 1 Dutch Oven-3 peg; 1 square-about 8 inches; 2 enamel coated Dutch Ovens and a 9-13 baking tray). There may be more. But those are the core. My fav all depends on what I’m preparing. They are the most versatile cooking instruments. The only item that I’m not fond of is when making in them is crepes. Most of mine were gifts from people or the Goodwill store that looked like OMG at the beginning. Glad you also enjoy these instruments of goodness.
zbigjeff that is a nice collection. I love cooking on cast iron. I have a stupid glass top stove right now that I want to switch out to gas. I like gas for the control of heat so much better.
-
RJ Adventures said in Cast iron cooking:
zbigjeff what did you do to clean them up? Only have a couple cast iron and both are lodge, one is a 10" skillet and I have a smaller griddle plate for camping to throw across the outdoor kitchen stove
For restoring really rusty dirty cast iron, I am definitely sold on the electrolysis method for cleaning cast iron. All you need is an automotive type battery charger, a container large enough for the item, and Arm and Hammer washing soda. When finished you just need to season the item.
processhead spot on for really nasty stuff when restoring.
-
Is there a certain brand you recommend for the enameled ci?
RJ Adventures I use Le Creuset. A little pricey but good up well. Great great distribution. Down side, my wife says it’s pretty heavy.
-
zbigjeff what did you do to clean them up? Only have a couple cast iron and both are lodge, one is a 10" skillet and I have a smaller griddle plate for camping to throw across the outdoor kitchen stove
RJ Adventures First, baking soda and water into semi loose paste and rub it in to remove most the rust. Then, add white vinegar, let it set for a couple minutes and continue wiping. Sometimes, it takes 2 applications. Then, use a metallic scrub pad to clean it up and remove all of the rust. Wash it off and dry it completely. Apply very light coating of mineral or canola oil to the complete item and place it in either a grill (mostly) upside down for around 15-20 mins. Take out and apply another light layer. Sometimes, the seasoning takes 3-4 applications. You can use the oven. But, you better have a good exhaust fan.
-
@ndmike There’s a following on this site for these gems. I have about 8-10 of them (12,11,10,8,6,4 skillets; 1 Dutch Oven-3 peg; 1 square-about 8 inches; 2 enamel coated Dutch Ovens and a 9-13 baking tray). There may be more. But those are the core. My fav all depends on what I’m preparing. They are the most versatile cooking instruments. The only item that I’m not fond of is when making in them is crepes. Most of mine were gifts from people or the Goodwill store that looked like OMG at the beginning. Glad you also enjoy these instruments of goodness.
zbigjeff I don’t think that I ever saw a 13 x 9 CI
-
craigrice It’s a cast iron ceramic glaze covered 9x13 pan just like some Dutch ovens. I went to look for it and I saw a note that I lent it to a friend to bake lasagna. Yep, have to get it back.
-
RJ Adventures said in Cast iron cooking:
zbigjeff what did you do to clean them up? Only have a couple cast iron and both are lodge, one is a 10" skillet and I have a smaller griddle plate for camping to throw across the outdoor kitchen stove
For restoring really rusty dirty cast iron, I am definitely sold on the electrolysis method for cleaning cast iron. All you need is an automotive type battery charger, a container large enough for the item, and Arm and Hammer washing soda. When finished you just need to season the item.
processhead That I never tried. Sounds like it will turn the trick. Yay for you. I just use baking soda/water. Then, vinegar and steel wool. Usually does a good job.
-
processhead That I never tried. Sounds like it will turn the trick. Yay for you. I just use baking soda/water. Then, vinegar and steel wool. Usually does a good job.
zbigjeff said in Cast iron cooking:
processhead That I never tried. Sounds like it will turn the trick. Yay for you. I just use baking soda/water. Then, vinegar and steel wool. Usually does a good job.
For day to day small jobs this sounds like a good method.
Here is a before and after picture I posted a couple months ago of a cast iron sausage stuffer that I redid using the electrolysis method.
https://meatgistics.waltonsinc.com/topic/1379/what-did-everyone-cook-today/2334?_=1619140893542
Paul
-
zbigjeff said in Cast iron cooking:
processhead That I never tried. Sounds like it will turn the trick. Yay for you. I just use baking soda/water. Then, vinegar and steel wool. Usually does a good job.
For day to day small jobs this sounds like a good method.
Here is a before and after picture I posted a couple months ago of a cast iron sausage stuffer that I redid using the electrolysis method.
https://meatgistics.waltonsinc.com/topic/1379/what-did-everyone-cook-today/2334?_=1619140893542
processhead Sausage Stuffer: Really nice job that you should be proud of for sure.
-
zbigjeff said in Cast iron cooking:
processhead That I never tried. Sounds like it will turn the trick. Yay for you. I just use baking soda/water. Then, vinegar and steel wool. Usually does a good job.
For day to day small jobs this sounds like a good method.
Here is a before and after picture I posted a couple months ago of a cast iron sausage stuffer that I redid using the electrolysis method.
https://meatgistics.waltonsinc.com/topic/1379/what-did-everyone-cook-today/2334?_=1619140893542
processhead that is a nice transformation on that old stuffer! My father-in-law has an old Enterprise stuffer that I am trying to convince him to give me!
-
zbigjeff @NDMike That is now my go to stuffer. I turned down a tight fitting poly disk from an old cutting board on my lathe to use as a gasket, so no more blow-by past the old cast iron piston.
Paul
-
zbigjeff @NDMike That is now my go to stuffer. I turned down a tight fitting poly disk from an old cutting board on my lathe to use as a gasket, so no more blow-by past the old cast iron piston.
processhead there is a guy making them here where I live. He sells them for under $10.
-
Hey guys, this post got me interested in cast iron. I do a lot of omelet bars, cooking in front of the customer. I’m discussed with the non stick pans.
Been looking on the internet to get a couple of 8 inch pans. That do you guys think of the Smithey NO. 8 CAST IRON CHEF SKILLET?
Is this a good one? should I be looking at some other brand?
Any suggestions welcomed. Thanks
-
Hey guys, this post got me interested in cast iron. I do a lot of omelet bars, cooking in front of the customer. I’m discussed with the non stick pans.
Been looking on the internet to get a couple of 8 inch pans. That do you guys think of the Smithey NO. 8 CAST IRON CHEF SKILLET?
Is this a good one? should I be looking at some other brand?
Any suggestions welcomed. Thanks
Chef I’ve heard good things about Field cast iron pans. They are not cheap but they get rave reviews. I’ve also heard good things about Finex.
-
Hey guys, this post got me interested in cast iron. I do a lot of omelet bars, cooking in front of the customer. I’m discussed with the non stick pans.
Been looking on the internet to get a couple of 8 inch pans. That do you guys think of the Smithey NO. 8 CAST IRON CHEF SKILLET?
Is this a good one? should I be looking at some other brand?
Any suggestions welcomed. Thanks
Chef i think you could buy old Griswold for what they want for fancy new ones.
-
Chef check out this review https://youtu.be/UXCGiRsUwLQ
-
Hey guys, this post got me interested in cast iron. I do a lot of omelet bars, cooking in front of the customer. I’m discussed with the non stick pans.
Been looking on the internet to get a couple of 8 inch pans. That do you guys think of the Smithey NO. 8 CAST IRON CHEF SKILLET?
Is this a good one? should I be looking at some other brand?
Any suggestions welcomed. Thanks
Chef I would have to agree with Tex_77 about going after some of the newer CI. Lodge would be less expensive but is going to be heavier than Wagner Ware or Griswold. There is even some okay Japanese and Taiwanese stuff sitting out there. I’d check out rummage sales and antique stores. Just need to ensure that the pans aren’t cracked or warped.
-
FYI, I started using this https://www.waltonsinc.com/camp-chef-cast-iron-conditioner on my cast iron pan at home and it has turned it from a so so pan into a main cooking utensil. This is the cast iron a intentionally destroyed a few years back to try the grape seed oild thing…or maybe it was something else…it was an oil that was supposed to give a much harder seasoning to it…I don’t remember but I do remember not being enamored of the results. This actually does a surprisingly good job.
Get more help with your processing questions and learn more about processing meat by subscribing to our waltonsinc.com youtube page at https://wltns.link/waltonstv I am a Gorilla, love yourself
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register LoginSponsored By:
