What did everyone cook today?
-
Tex_77 Also, that 1st photo with the glowing coals was bad [censored]! Oh come on! I shouldn’t be censored!
-
Tex_77 Cast Iron deep (as in Dutch Oven) or shallow (as in pan fried in skillet)?
-
Tex_77 Cast Iron deep (as in Dutch Oven) or shallow (as in pan fried in skillet)?
calldoctoday Deep as in dutch oven, less splatter all over.
-
calldoctoday Deep as in dutch oven, less splatter all over.
Tex_77 That is the way I do mine too. I tried some of the fancy deep fryers & indeed they are nice, pretty much splatter free, & do a basic oil filter & storage. However, too many digital components that go bad & cannot be repaired efficiently, apparently. So, I went back to the simple, high quality, & durable (had the Dutch Ovens for probably 30 years before I even bought the fancy fryers) & they are still running strong. My Mom used to make the best though it seemed & she would fry hers in the skillet, lower & slower, but perfectly amazing with very little mess. I apparently was not blessed with that great of a skill. Yours looks a world better than mine turned out last Sunday, although still delicious. I will try to post some photos as soon as I can.
-
Tex_77 That is the way I do mine too. I tried some of the fancy deep fryers & indeed they are nice, pretty much splatter free, & do a basic oil filter & storage. However, too many digital components that go bad & cannot be repaired efficiently, apparently. So, I went back to the simple, high quality, & durable (had the Dutch Ovens for probably 30 years before I even bought the fancy fryers) & they are still running strong. My Mom used to make the best though it seemed & she would fry hers in the skillet, lower & slower, but perfectly amazing with very little mess. I apparently was not blessed with that great of a skill. Yours looks a world better than mine turned out last Sunday, although still delicious. I will try to post some photos as soon as I can.
calldoctoday I shot for a 350 oil temp, just FYI.
-
calldoctoday I shot for a 350 oil temp, just FYI.
Tex_77 Yes, that is the exact same thing I do for both Fish & Chicken. At least if I can maintain that 325/350 area, I am good. I keep a short thermometer in the oil from initial poor until all is done. The nice thing about the iron though is once you get it slowly heated (I start out very low & build it up), It will sustain an even heat better than anything I know of & you can keep the heat much lower, but still maintain the close to 350.
-
calldoctoday I shot for a 350 oil temp, just FYI.
Tex_77 Which oil do you use? I still try to use Peanut or a Peanut blend, but I will have to admit, that has gotten much more difficult over the years, especially after about 10 years ago when all the bio diesel started up & peanut oil, that was already high & most folks did not see the value in it, probably doubled in price here locally. That is another story, like buying gas, stories I can tell from experience, because they grow & produce a lot of peanut oil right here locally.
-
Tex_77 Which oil do you use? I still try to use Peanut or a Peanut blend, but I will have to admit, that has gotten much more difficult over the years, especially after about 10 years ago when all the bio diesel started up & peanut oil, that was already high & most folks did not see the value in it, probably doubled in price here locally. That is another story, like buying gas, stories I can tell from experience, because they grow & produce a lot of peanut oil right here locally.
calldoctoday like you peanut for the most part.
Isaiah 5:22 Woe to those who are heroes at drinking wine and champions at mixing drinks
-
calldoctoday like you peanut for the most part.
Tex_77 calldoctoday Like both of you, I used to use peanut for most, some corn oil for a few things, but after taste testing with several hundred people at catering, I use frying canola oil now. It has a higher smoke point, and tends to oxidize slower, a big factor when I use 150 pounds in my fryers. Now use canola even in my kitchen. I also maintain my oil between 335 and 340. More controllable…
-
From a couple nights ago. Son and wife thought steak and shrimp was a good idea as well. Bacon wrapped mine… That’ll be done again.
They brought my four legged grandkids too.
Good times.
-
From a couple nights ago. Son and wife thought steak and shrimp was a good idea as well. Bacon wrapped mine… That’ll be done again.
They brought my four legged grandkids too.
Good times.
PapaSop How Bout Them Dogs, They need some shrimps & doggies too!
-
Tex_77 calldoctoday Like both of you, I used to use peanut for most, some corn oil for a few things, but after taste testing with several hundred people at catering, I use frying canola oil now. It has a higher smoke point, and tends to oxidize slower, a big factor when I use 150 pounds in my fryers. Now use canola even in my kitchen. I also maintain my oil between 335 and 340. More controllable…
Chef That is amazing. I would swear (because I checked them all out years ago) that Canola Oil how a much lower smoke point than peanut, by far. Maybe it is some of those blends that are getting a little more out of things now. At first I thought you were going to say Sunflower Oil for the nice flavor, so I was really surprised for you to say Canola was the new answer.
-
Chef That is amazing. I would swear (because I checked them all out years ago) that Canola Oil how a much lower smoke point than peanut, by far. Maybe it is some of those blends that are getting a little more out of things now. At first I thought you were going to say Sunflower Oil for the nice flavor, so I was really surprised for you to say Canola was the new answer.
calldoctoday You are correct. I read my chart wrong. Still, for the price, I use the canola oil, smoke point at 400, corn and peanut at 450. Didn’t have enough to drink when I stated that LOL. Do some taste test with friends and family. all three oils have a high enough smoke point to fry. To make a roux, that’s where I use corn if I want a really dark roux.
-
From a couple nights ago. Son and wife thought steak and shrimp was a good idea as well. Bacon wrapped mine… That’ll be done again.
They brought my four legged grandkids too.
Good times.
PapaSop I’m waiting Daddy. Poor dogs. They can smell the OMG going on.
-
PapaSop Lie to us and tell us the dogs got something!
Get more help with your processing questions and learn more about processing meat by subscribing to our waltonsinc.com youtube page at https://wltns.link/waltonstv I am a Gorilla, love yourself
-
Jonathon
Ok…they did
-
PapaSop Now, doesn’t that feel better coming clean?
-
calldoctoday You are correct. I read my chart wrong. Still, for the price, I use the canola oil, smoke point at 400, corn and peanut at 450. Didn’t have enough to drink when I stated that LOL. Do some taste test with friends and family. all three oils have a high enough smoke point to fry. To make a roux, that’s where I use corn if I want a really dark roux.
Chef No problem, I understand. However, things have changed at times & so I gave you the full benefit. I will say that I think some of the frying blends out there incorporate Peanut with Canola or something like that. On the Roux, I still use Peanut, again because of the extremely high heat (you know, blistering/Gotcha!). I will have to try the Canola some time. However, as I am sure has happened to you, it is a fine line between perfect Roux & Burned Roux, very fine. My Roux usually just about starts to smoke, just barely, before I bring it down or better yet, stir faster. Sunflower has a wonderful flavor, but I keep thinking the smoke point on it is too low for good Roux. I think I have experimented with some other stuff too, but don’t remember all the details right now. You are right though, pricewise, peanut was always high, but for about the past 10 years or so, it is has been downright ridiculous.
-
PapaSop God Boy, Good Boy Now!
You know they think you are their pets. -
PapaSop God Boy, Good Boy Now!
You know they think you are their pets.calldoctoday exactly… LOL
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register LoginSponsored By:
