Pork butt stalled at 143
-
I agree that’s about the right temperature for a stall, but 200F is pretty low to set a pit at. I agree with Chef that 225F is more like it, and 250F isn’t way out of the question (but I wouldn’t go hotter than that). I also don’t have a problem with wrapping one.
Yes, times can vary from butt to butt.
-
Been at 250 for 4 hours and still not even close. That’ll do it. I am pretty good at the little stuff, not worth a damn on the bigger stuff. I better stick to snack sticks and cheese. I’m callin it. 4 am to 8pm is ridiculous… I’ll leave the butts and briskets to you experts.
-
Been at 250 for 4 hours and still not even close. That’ll do it. I am pretty good at the little stuff, not worth a damn on the bigger stuff. I better stick to snack sticks and cheese. I’m callin it. 4 am to 8pm is ridiculous… I’ll leave the butts and briskets to you experts.
lkrfletcher dont give up after first try. You can do it. What smoker you using?
-
PK100, then I switched it to the oven at 10 hour mark.
-
PK100, then I switched it to the oven at 10 hour mark.
lkrfletcher and im assuming you had it on the 1250 watt setting? What was the outside temp? Which that really shouldnt have had an influence a whole lot with the PK. How familiar are you with this machine, maybe just a setting error?
-
10 hours into my low and slow pork butt. Set to 200 . Internal is only 143. I’m gonna take it out of the smoker and into the oven and turn temp up to 250. If it burns, it burns. I am so over this. Ten hours for a 6lb butt is ridiculous at 143. I’m not gonna run this thing all night, if it ain’t ready in another 4 hours. Into the trash it goes.
This post is deleted! -
lkrfletcher and im assuming you had it on the 1250 watt setting? What was the outside temp? Which that really shouldnt have had an influence a whole lot with the PK. How familiar are you with this machine, maybe just a setting error?
twilliams
Yeah I had everything set correctly. Outside temp was around 40. It justs takes a very long time. Not sure the juice is worth the squeeze. -
twilliams
Yeah I had everything set correctly. Outside temp was around 40. It justs takes a very long time. Not sure the juice is worth the squeeze.lkrfletcher smoke at 225, wrap at 160, should easily be done in under 8 hours.
-
lkrfletcher smoke at 225, wrap at 160, should easily be done in under 8 hours.
Tex_77
That’s what I thought too. -
Tex_77
That’s what I thought too. -
lkrfletcher Lots of variables involved. Did you allow the meat to come to near or at room temperature before smoking? Might want to calibrate the thermometer 32’F in an water/ice bath and 212’F in boiling water ( or adjust for the boiling temperature depending on altitude.
Above all, don’t get discouraged. Good pork but is worth the learning curve. Some variable will show up.
-
lkrfletcher Lots of variables involved. Did you allow the meat to come to near or at room temperature before smoking? Might want to calibrate the thermometer 32’F in an water/ice bath and 212’F in boiling water ( or adjust for the boiling temperature depending on altitude.
Above all, don’t get discouraged. Good pork but is worth the learning curve. Some variable will show up.
Chef
https://meatgistics.waltonsinc.com/topic/577/how-to-make-pulled-pork-recipeThis is what I followed.
Had both a meater plus probe and a Weber i-grill in the meat and in ambient ( I wanter to compare them side by side) -
Chef
https://meatgistics.waltonsinc.com/topic/577/how-to-make-pulled-pork-recipeThis is what I followed.
Had both a meater plus probe and a Weber i-grill in the meat and in ambient ( I wanter to compare them side by side)lkrfletcher Maybe the pork gods were angry at something.
-
Moving onto 16 pounds of smoked colby jack.
-
Moving onto 16 pounds of smoked colby jack.
lkrfletcher you got a smoke tube for cold smoking cheese?
-
lkrfletcher you got a smoke tube for cold smoking cheese?
twilliams
Nope. I just use the PK100 on low temp. It’s looking good. Another hour and it will be done. I’ll send a post. -
10 hours into my low and slow pork butt. Set to 200 . Internal is only 143. I’m gonna take it out of the smoker and into the oven and turn temp up to 250. If it burns, it burns. I am so over this. Ten hours for a 6lb butt is ridiculous at 143. I’m not gonna run this thing all night, if it ain’t ready in another 4 hours. Into the trash it goes.
lkrfletcher I am by no means an expert. I would have bumped the temp on the pk100 to about 225. I’d spray the butts with apple juice after wrapping them in foil. I use the grill eye pro and set a target temp and drink beer or take a long nap. They should eventually be done and the closed foil with the apple juice will keep them from drying out.
-
I’ve done 100’s and they all stall at a difference place and get past at a different pace. I would have foiled it and bumped my smoer up to 250 or 275 degrees and that should help a lot.
KenfromMI That’s the method I use. I’ll put the butt in a pan with some beer or apple cider vinegar and cover with foil and bump the temp up 25-50 degrees and it will come out tender and moist in no time.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
