Weston Pro Series #32
-
Does above model come with a “standalone” Auger Bearing? Instruction Manual addresses an array of different models and I might be looking for a part (Auger Bearing) not applicable to Pro Series Model # 10-3201-W. Religiously watch your videos on youtube. Thank you kindly.
-
jc4475 I’m trying to find out but if you mean a removable auger bearing that isn’t built into the motor then I don’t think it does. Again, trying to find a better answer on that.
-
Weston Pro Series Meat Grinder, “Model # 10-3201-W”. New purchaser wondering if it was shipped minus an “Auger Bearing”. Does this model come with a standalone “Auger Bearing”? Instruction Manual addresses an array of different models so answer not clear. Hesitant to use if I’m missing a part. Thank you.
-
jc4475 Okay, I think I have it. The first pic is of a #12 which has a removable auger bearing. The #22 which I have in my test kitchen is the 2nd and 3rd pics which isn’t removable and then I took a pic of the manual page that shows the auger bearing. So I think You are asking if it should have come with an auger bearing like what is in the pic for the #12?
-
jc4475 Okay, I think I have it. The first pic is of a #12 which has a removable auger bearing. The #22 which I have in my test kitchen is the 2nd and 3rd pics which isn’t removable and then I took a pic of the manual page that shows the auger bearing. So I think You are asking if it should have come with an auger bearing like what is in the pic for the #12?
-
jc4475 Okay, I think I have it. The first pic is of a #12 which has a removable auger bearing. The #22 which I have in my test kitchen is the 2nd and 3rd pics which isn’t removable and then I took a pic of the manual page that shows the auger bearing. So I think You are asking if it should have come with an auger bearing like what is in the pic for the #12?
-
jc4475 No, it appears to be attached or embedded into the back of the head assembly and doesn’t come out with the auger. Now, all I can say for sure is that is what my #22 pro series looks like, we don’t have a #32 in stock to check. And yes the manual seems odd to me, that pic of the flat washer where it says “Note:…” does NOT appear in the manuals for the #5 and #8 grinders, instead it just shows the same image for the bearing that is actually in the #22.
So, do you have a bearing like the one in the pic I sent of our 22?
-
jc4475 No, it appears to be attached or embedded into the back of the head assembly and doesn’t come out with the auger. Now, all I can say for sure is that is what my #22 pro series looks like, we don’t have a #32 in stock to check. And yes the manual seems odd to me, that pic of the flat washer where it says “Note:…” does NOT appear in the manuals for the #5 and #8 grinders, instead it just shows the same image for the bearing that is actually in the #22.
So, do you have a bearing like the one in the pic I sent of our 22?
-
jc4475 No, it appears to be attached or embedded into the back of the head assembly and doesn’t come out with the auger. Now, all I can say for sure is that is what my #22 pro series looks like, we don’t have a #32 in stock to check. And yes the manual seems odd to me, that pic of the flat washer where it says “Note:…” does NOT appear in the manuals for the #5 and #8 grinders, instead it just shows the same image for the bearing that is actually in the #22.
So, do you have a bearing like the one in the pic I sent of our 22?
-
jc4475 No, it appears to be attached or embedded into the back of the head assembly and doesn’t come out with the auger. Now, all I can say for sure is that is what my #22 pro series looks like, we don’t have a #32 in stock to check. And yes the manual seems odd to me, that pic of the flat washer where it says “Note:…” does NOT appear in the manuals for the #5 and #8 grinders, instead it just shows the same image for the bearing that is actually in the #22.
So, do you have a bearing like the one in the pic I sent of our 22?
-
jc4475 No, it appears to be attached or embedded into the back of the head assembly and doesn’t come out with the auger. Now, all I can say for sure is that is what my #22 pro series looks like, we don’t have a #32 in stock to check. And yes the manual seems odd to me, that pic of the flat washer where it says “Note:…” does NOT appear in the manuals for the #5 and #8 grinders, instead it just shows the same image for the bearing that is actually in the #22.
So, do you have a bearing like the one in the pic I sent of our 22?
-
Sir, I feel comfortable that the auger bearing on the #32 is “built-in” just like in the #22. Appreciate your help My Man! You guys are the BEST!
jc4475
After cleaning, I always use some field grade silicone spray on mine to help keep them in good shape for the next grind. -
jc4475
After cleaning, I always use some field grade silicone spray on mine to help keep them in good shape for the next grind.Sweet! Thank you.
-
jc4475
After cleaning, I always use some field grade silicone spray on mine to help keep them in good shape for the next grind.BTW, thank you for Your Service.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register LoginSponsored By:
