Tender roast beef and roast pork?
-
Here is a sous vide chuck roast thst I did today. It was injected with Soluble Pa’s Black Bull, and rubbed with Butter Garlic rub.
-
Heres some pics cold after sliced. I’ll get some more pics once its warmed back up in the sous vide.
-
mikemikemike Vacuum tumbling would have been the most obvious “trick” I can think of but it seems like you’ve tried that one. I’m gonna talk to our application specialist tomorrow and see what he comes up with as far as additives. There are additives you can use to help but I am pretty sure it has more to do with cooking/processing when arby’s makes theirs. They obviously also use additives but I think it has moreto do with the cooking and I do think sous vide is the main thing they use for it. I know you’ve done it in the past but I’ve read accounts of Arbys employees getting the “grey blob” out of the vac bag. Ill let you know what I find out.
Jonathon said in Tender roast beef and roast pork?:
mikemikemike Vacuum tumbling would have been the most obvious “trick” I can think of but it seems like you’ve tried that one. I’m gonna talk to our application specialist tomorrow and see what he comes up with as far as additives. There are additives you can use to help but I am pretty sure it has more to do with cooking/processing when arby’s makes theirs. They obviously also use additives but I think it has moreto do with the cooking and I do think sous vide is the main thing they use for it. I know you’ve done it in the past but I’ve read accounts of Arbys employees getting the “grey blob” out of the vac bag. Ill let you know what I find out.
I really shouldn’t have used Arby’s as an example. They clearly use some sort of pressed meat chunks with additives to make it juicy and and tender. Reminds me of a Terrine. And yes sous vide would definitely benefit the end product since the flavors are already pressed/injected/vacuum’d into the meat.
But solid meats sous vide , if you perfect the time/temp could get that perfect tenderness/juicy ratio. But you sacrifice flavor. And we are talking about a long time at most likely a very specific temp. For example, the best pulled pork butt i have ever did sous vide was 30 hours at 155F. It just pulled from the bone and shredded with barely any effort. But in this experiment i need the meat to slice fairly thin and hold up on its own weight.
-
Well, I have to say, i don’t know how much improvement the Bromelain meat tenderizer made, but its clear the sodium phosphate really helped with moisture, and the MSG definitely helped on flavor. I think i need to experiment more with bromelain. I finally recieved a jar of pure bromelain that isn’t cut with salt and dextrose, so we will see if i can improve on the tenderness. I will run some smaller scale tests over the next week with other cuts of meat. I’ll probably use sous vide as a controlled temp/time cooking method. Less variables that way, but less flavor.
Anyway heres the final product warmed back up.
-
I spoke too soon about the bromelain. I tried it while it was sliced cold. After i warmed it up and added it to a sandwich, you could really tell how juicy and tender the meat really was. It was amazing.
-
You might try sous vide. I can sous vide a chuck rosst to almost prime rib tenderness. Another good cut to use is eye of round.
Tex_77 I’m with you on the sous vide. All of the seasoning within the vacuum pack gets distributed throughout the meat and gets almost any cut of meat way more tender. But, the ethnic women in the past have always sliced it thin, used a gravy (made with a decent portion of white jug wine at the end of the gravy making process) to keep the meat moist all the time. But, if you don’t want “gravy”, sous vide is the way to go.
-
Jonathon said in Tender roast beef and roast pork?:
mikemikemike Vacuum tumbling would have been the most obvious “trick” I can think of but it seems like you’ve tried that one. I’m gonna talk to our application specialist tomorrow and see what he comes up with as far as additives. There are additives you can use to help but I am pretty sure it has more to do with cooking/processing when arby’s makes theirs. They obviously also use additives but I think it has moreto do with the cooking and I do think sous vide is the main thing they use for it. I know you’ve done it in the past but I’ve read accounts of Arbys employees getting the “grey blob” out of the vac bag. Ill let you know what I find out.
I really shouldn’t have used Arby’s as an example. They clearly use some sort of pressed meat chunks with additives to make it juicy and and tender. Reminds me of a Terrine. And yes sous vide would definitely benefit the end product since the flavors are already pressed/injected/vacuum’d into the meat.
But solid meats sous vide , if you perfect the time/temp could get that perfect tenderness/juicy ratio. But you sacrifice flavor. And we are talking about a long time at most likely a very specific temp. For example, the best pulled pork butt i have ever did sous vide was 30 hours at 155F. It just pulled from the bone and shredded with barely any effort. But in this experiment i need the meat to slice fairly thin and hold up on its own weight.
mikemikemike Re: Slicing the meat. Sous vide it, less it cool, place it in the cooler and slice it in the morning. You will get proper slices. Just make sure it’s cold.
-
mikemikemike Re: Slicing the meat. Sous vide it, less it cool, place it in the cooler and slice it in the morning. You will get proper slices. Just make sure it’s cold.
Maybe you misunderstood my posts.This was a pre packaged boneless picnic roast that came trussed. I only injected it with a solution of Bromelain, MSG, and sodium phosphate, then vacuum tumbled it for 45 minutes just before i put it on the rotisserie.
I Rotisserie it low and slow (about 4 hours) till it reached 155F. I chilled it overnight. And sliced it #5 dial on my Hobart The following day. I only put a small portion in a bag and sous vide it at around 140F for 30 minutes to bring it back up to servering temp. Thats when i really noticed how tender and juicy it really was, as you can see in the pictures i provided. I couldn’t have asked for a better end result for a first attempt using bromelain and sodium phosphate. The flavor was outstanding, not salty at all, just perfect. -
As far as sous vide from beginning to end, that would only work if you already had an adundance of “gravy” made the traditional way from drippings. Especially with pork. Sure there are things like pork base you can buy for food service, but in my opinion, none of them are like the real thing. I make my pork stock from scratch with pork neck bones i get from a local butcher that slaughters their own pigs. Usually a $1/lb if i buy 30lbs or more.
-
As far as sous vide from beginning to end, that would only work if you already had an adundance of “gravy” made the traditional way from drippings. Especially with pork. Sure there are things like pork base you can buy for food service, but in my opinion, none of them are like the real thing. I make my pork stock from scratch with pork neck bones i get from a local butcher that slaughters their own pigs. Usually a $1/lb if i buy 30lbs or more.
mikemikemike I use the juice from the sous vide bag to make the gravy.
-
mikemikemike I use the juice from the sous vide bag to make the gravy.
I have done that in the past, and its not terrible, but its nothing like the drippings from a roast thats been on a spit all day. Or 5lbs of neck bones browned and in the pressure cooker for 2-4 hours.
-
Maybe you misunderstood my posts.This was a pre packaged boneless picnic roast that came trussed. I only injected it with a solution of Bromelain, MSG, and sodium phosphate, then vacuum tumbled it for 45 minutes just before i put it on the rotisserie.
I Rotisserie it low and slow (about 4 hours) till it reached 155F. I chilled it overnight. And sliced it #5 dial on my Hobart The following day. I only put a small portion in a bag and sous vide it at around 140F for 30 minutes to bring it back up to servering temp. Thats when i really noticed how tender and juicy it really was, as you can see in the pictures i provided. I couldn’t have asked for a better end result for a first attempt using bromelain and sodium phosphate. The flavor was outstanding, not salty at all, just perfect.mikemikemike Damn, I totally missed “the post” you mentioned. Sorry for not doing a thorough search of the discussion thread. Please accept my apologies.
-
As far as sous vide from beginning to end, that would only work if you already had an adundance of “gravy” made the traditional way from drippings. Especially with pork. Sure there are things like pork base you can buy for food service, but in my opinion, none of them are like the real thing. I make my pork stock from scratch with pork neck bones i get from a local butcher that slaughters their own pigs. Usually a $1/lb if i buy 30lbs or more.
mikemikemike Totally agree on the “drippings” with sous vide. Looks and sounds like you have it going. Keep it up. Again, see what happens when this person didn’t catch the “whole” thread. Please accept my apology AGAIN. Have another great day. P.S. Yes, I’m not the kind of person who goes and hides when they make a mistake. I learned long ago that I admit when I’m wrong straight up. That way, I can sleep better.
-
Maybe you misunderstood my posts.This was a pre packaged boneless picnic roast that came trussed. I only injected it with a solution of Bromelain, MSG, and sodium phosphate, then vacuum tumbled it for 45 minutes just before i put it on the rotisserie.
I Rotisserie it low and slow (about 4 hours) till it reached 155F. I chilled it overnight. And sliced it #5 dial on my Hobart The following day. I only put a small portion in a bag and sous vide it at around 140F for 30 minutes to bring it back up to servering temp. Thats when i really noticed how tender and juicy it really was, as you can see in the pictures i provided. I couldn’t have asked for a better end result for a first attempt using bromelain and sodium phosphate. The flavor was outstanding, not salty at all, just perfect.mikemikemike Don’t know why my reply to the “misunderstanding you indicated” was indicated as “Censored”. The post read: ( I totally missed “the post” you mentioned. Sorry for not doing a thorough search of the discussion thread. Please accept my apologies.)
-
mikemikemike Don’t know why my reply to the “misunderstanding you indicated” was indicated as “Censored”. The post read: ( I totally missed “the post” you mentioned. Sorry for not doing a thorough search of the discussion thread. Please accept my apologies.)
zbigjeff
No need to appologize. I skim read things too sometimes. Plus, i am new to using this type of forum. I am used to the old style forums without all the extra stuff like live chat, tags and notifications -
Here is a sous vide chuck roast thst I did today. It was injected with Soluble Pa’s Black Bull, and rubbed with Butter Garlic rub.
Tex_77 said in Tender roast beef and roast pork?:
Here is a sous vide chuck roast thst I did today. It was injected with Soluble Pa’s Black Bull, and rubbed with Butter Garlic rub.
What time and temp did you go with? I have had really good results with 24 hours @ 132.5F. Came out like prime rib.
-
Tex_77 said in Tender roast beef and roast pork?:
Here is a sous vide chuck roast thst I did today. It was injected with Soluble Pa’s Black Bull, and rubbed with Butter Garlic rub.
What time and temp did you go with? I have had really good results with 24 hours @ 132.5F. Came out like prime rib.
mikemikemike I usally try to do 24 hours at 130. So it looks like we are on the same page as far as sous vide chuck roast goes.
-
I generally use eye round for pit beef. I either do it on a infrared cooker or smoker. I like it just about walking so cook until 125 internal temp. I usually trim it up add salt, pepper, garlic powder and onion powder, If I smoke leave the seasoned eye round in the refrig for 24 hours (pellicle), toss in the smoker at 225degrees F until it reaches desired temp (125 for me). Take it off the smoker , let it rest and let the Hobart Slicer work it’s magic. I go real thin to just about chipping or shaving. Can’t imagine anything more tender. I have also made a marinade of lemons/oranges with a-1 but I really like it simple and let the meat speak for itself.
-
I generally use eye round for pit beef. I either do it on a infrared cooker or smoker. I like it just about walking so cook until 125 internal temp. I usually trim it up add salt, pepper, garlic powder and onion powder, If I smoke leave the seasoned eye round in the refrig for 24 hours (pellicle), toss in the smoker at 225degrees F until it reaches desired temp (125 for me). Take it off the smoker , let it rest and let the Hobart Slicer work it’s magic. I go real thin to just about chipping or shaving. Can’t imagine anything more tender. I have also made a marinade of lemons/oranges with a-1 but I really like it simple and let the meat speak for itself.
I reserve eye round for beef jerky. For pit beef I use either Tri Tip, or Sirloin Tip roast. I pull around 117F. There is a good 10F carry over with a large roast.
-
mikemikemike I agree that eye of round is pretty perfect for whole muscle jerky. I recently discovered that intramuscular fatty cuts seem to work really well for the “tender” jerky, I am just trying to find out some information/documentation on what (if anything) the extra sugar is doing to the fat to keep it from spoiling. If I can prove that it is doing that I am going to do a ton of stuff with fatty meats and jerky!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register LoginSponsored By:
