New Groups to Help Everyone on Smokers
-
Yikes Joe, That is scary! The whole idea of the gas burners is ease of use & not having to watch them all the time like the stick burners, even the flavor is not exactly the same. Less work for when we want to feel lazy or have other stuff going on at the same time we want to cook good food. I have the one with the gauge up front too.
Looks like we had the same initial problem more or less, but the spiking part is real scary! -
smokin greg I also built a smoker from a commercial refrigerator. I used a large electric stove burner in the bottom. It heats it with ease and it would be easy to add other if necessary.
Kmucker I had an uncle & a friend that did something like that about 40 years ago. They used a water heater burner & a real old heavy duty refer. I did something once with an old range & the smoke box. It was OK. If I had the welding equipment & a little time to develop my skills I would probably do one on my own.
-
Yikes Joe, That is scary! The whole idea of the gas burners is ease of use & not having to watch them all the time like the stick burners, even the flavor is not exactly the same. Less work for when we want to feel lazy or have other stuff going on at the same time we want to cook good food. I have the one with the gauge up front too.
Looks like we had the same initial problem more or less, but the spiking part is real scary!calldoctoday Mine was the electric version so I didn’t have to worry about the flame up…just super intense heat. I’m looking forward to the stick burner in that it will keep me busy for hours. For some reason I like food projects that last hours and sometimes days. lol
-
I really like the stick burners too. I like the flavor better & swear there is a difference. It does take a lot more work though & a few good friends to spend the night or day with & a few good things to drink really help. That seems harder to come by these days for some strange reason.
-
Jonathon I just waited over 3 months for Masterbuilt to replace a warranty ridden MB40 only to have the replacement arrive damaged from FedEx. It took 3 months to get the first one fixed and a few months later it completely malfunctioned and fried about 8 racks of ribs in a matter of minutes. I even had the owner of the company’s son reach out and offer help and then he just quit communicating entirely. I am beyond fed up with Masterbuilt.
Joe Hell It is time to come over to the Smokin-It side Joe.
I used to have a couple of Masterbuilts and some others before finding the SI’s. Heck, I still have a propane Masterbuilt, but it hasn’t come out for several years. I probably should sell it.I have had my Smokin-It smoker since 2014 and haven’t had a single problem with it.
I use it in all kinds of weather and it never fails me. I smoked a pork butt on time in -20F weather and it maintained temp easily and I didn’t even have to check on anything until it was done.
Gregg - Fargo, ND
Smokin-It #3 Electric Smoker that replaced a Masterbuilt XL, Big Chief (still used for fish), and few others over the years, along with a variety of Weber Gas/Charcoal Grills, Anova Sous Vide, etc. devices. -
Joe Hell It is time to come over to the Smokin-It side Joe.
I used to have a couple of Masterbuilts and some others before finding the SI’s. Heck, I still have a propane Masterbuilt, but it hasn’t come out for several years. I probably should sell it.I have had my Smokin-It smoker since 2014 and haven’t had a single problem with it.
I use it in all kinds of weather and it never fails me. I smoked a pork butt on time in -20F weather and it maintained temp easily and I didn’t even have to check on anything until it was done.
-
calldoctoday Mine was the electric version so I didn’t have to worry about the flame up…just super intense heat. I’m looking forward to the stick burner in that it will keep me busy for hours. For some reason I like food projects that last hours and sometimes days. lol
Joe Hell I love the BBQ that comes off of a stick burner, but I hate having to manage them. I know to some people that is part of the fun, but I practice Lazy-Q. I prep my food, put it in the smoker set the temp, and then typically walk away until it is done, or if it is nice enough I’ll just sit next to the smoker with a beer and smell the wonderfulness.
Typically on long smokes like butts/briskets, I’ll start them at Midnight the night before and then go to bed knowing that everything will be good to go until the next day when they are done.
The one thing that I found different about the electric versus the propane and offset that I also have is that I can taste the nuances of the different woods that I use better than I can with my propane/offset. If I use cherry, I can really taste the cherry flavors, but when I use the propane and the offset it is more of a generic smoke smell although still really good.
-
Masterbuilt - Saturday I did my first smoke in the the new Pro model that I bought. Jalapeno snack sticks came out great! I’m glad I only did a half batch instead of the 25 pounds the spices would make. I didn’t realize my smoker box was quite as small as it is, until my 12 lbs of sticks were hanging inside (and filling it up), but that’s not a problem, as 12 lbs. at a time is plenty for me to work with. I really had to play with the lowest propane settings to get and hold the 125 degree starting temp, then making and holding the incremental step temperatures every hour or two (sometimes I opened the door a crack, so the temps didn’t rocket way too high), but I will figure it out. If I smoke large chunks of meat, the racks should be plenty big, so I really don’t need a larger smoker than I bought. The price was right!
-
Masterbuilt - Saturday I did my first smoke in the the new Pro model that I bought. Jalapeno snack sticks came out great! I’m glad I only did a half batch instead of the 25 pounds the spices would make. I didn’t realize my smoker box was quite as small as it is, until my 12 lbs of sticks were hanging inside (and filling it up), but that’s not a problem, as 12 lbs. at a time is plenty for me to work with. I really had to play with the lowest propane settings to get and hold the 125 degree starting temp, then making and holding the incremental step temperatures every hour or two (sometimes I opened the door a crack, so the temps didn’t rocket way too high), but I will figure it out. If I smoke large chunks of meat, the racks should be plenty big, so I really don’t need a larger smoker than I bought. The price was right!
IndianaJohn
Since there’s not many using LP as we are what unit do you have? I have the Pro Temp XL. This is thermostatically controlled and will hold whatever temp I set at +/- 2 deg. Does depend on outside air temp and wind. Great piece of equipment.
I don’t use the stock smoker tray. Went to the A Maze N Smoker Tube. Fantastic. -
IndianaJohn
Since there’s not many using LP as we are what unit do you have? I have the Pro Temp XL. This is thermostatically controlled and will hold whatever temp I set at +/- 2 deg. Does depend on outside air temp and wind. Great piece of equipment.
I don’t use the stock smoker tray. Went to the A Maze N Smoker Tube. Fantastic.PapaSop Hey Papa,I’m curious how you use the smoker tube with the Masterbuilt with out temperature runaway
By the way, mine is electricGive a man a fish and he eats for a day
Teach a man to fish and he drinks beer for a lifetime -
PapaSop Hey Papa,I’m curious how you use the smoker tube with the Masterbuilt with out temperature runaway
By the way, mine is electricglen
No temp variance with the tube. Just smoke. Put on lowest rack away from direct flame. I did have it flame up once but that was from raising temp above anything I’ve done before. Not sure how it’d work with electric but give it a try. Don’t test with meat inside…Just saying. -
glen
No temp variance with the tube. Just smoke. Put on lowest rack away from direct flame. I did have it flame up once but that was from raising temp above anything I’ve done before. Not sure how it’d work with electric but give it a try. Don’t test with meat inside…Just saying.PapaSop Thanks, I’ll try that. My 6" tube fit perfectly in the refill hole and I tried a trial run without meat, luckily I caught it as it was passing 500 deg!
-
IndianaJohn
Since there’s not many using LP as we are what unit do you have? I have the Pro Temp XL. This is thermostatically controlled and will hold whatever temp I set at +/- 2 deg. Does depend on outside air temp and wind. Great piece of equipment.
I don’t use the stock smoker tray. Went to the A Maze N Smoker Tube. Fantastic.PapaSop - I replaced a very old electric smoker that the chip tray was so far above the element, that chips wouldn’t start smoldering until it hit about 300 degrees (that, and the bottom was rusting out). Thought I’d try other than another electric, because of how poorly the old one worked (thermostat was like the one that plugs into the side of an electric skillet). I bought the Masterbuilt Pro Series MDS 230S Dual Fuel smoker (propane or charcoal). It’s a couple inches bigger in size than the old smoker was, but not much. The smoker box is about 16" wide, 14" deep, and the area where the 4 racks go is about 23" tall. That doesn’t count the lower area that has a separate door where the burner, chips, and water tray go (their chip pan really sucked, so as I saw others doing, I’m using a 10" cast iron skillet for my chips, and that works really well). I didn’t have a lot of cash to work with, and this one came in at less than 150 delivered, and with that, I’m smoking again.
-
PapaSop Thanks, I’ll try that. My 6" tube fit perfectly in the refill hole and I tried a trial run without meat, luckily I caught it as it was passing 500 deg!
glen
Wow. Did it flare up? What temp you have it set at? -
PapaSop Yes, flare up plus. The top air flow control does not close all the way and since the tube was directly in the intake cylinder I had a runaway. I’m going to see if I can modify the top air flow control.
Give a man a fish and he eats for a day
Teach a man to fish and he drinks beer for a lifetime -
PapaSop Yes, flare up plus. The top air flow control does not close all the way and since the tube was directly in the intake cylinder I had a runaway. I’m going to see if I can modify the top air flow control.
glen
Guess I’m not familiar with the intake cylinder part. Can you just lay it on a rack off to the side? Can you send a pic or model number. Curious what the smoker looks like. -
glen
Guess I’m not familiar with the intake cylinder part. Can you just lay it on a rack off to the side? Can you send a pic or model number. Curious what the smoker looks like.PapaSop I have the MES 130 P Bluetooth smoker. What I tried was inserting a 6" Amazin smoke tube into the chip loading tube. But yes, I can and will lay it on the rack from now on
-
smokin greg Some sort of extra insulation is probably the best thing as 2 1,000 watt plates in a 30 cubic foot smoker seems sufficient?
Jonathon said in New Groups to Help Everyone on Smokers:
smokin greg Some sort of extra insulation is probably the best thing as 2 1,000 watt plates in a 30 cubic foot smoker seems sufficient?
Go to U-Haul and steel some moving blankets. They work great when you need a little extra.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register LoginSponsored By:
