Hog dogs
-
@Jim-Nowak I used 5 lb of pork shoulder, 5 lb of chuck and one package of beef marrow bones. They were the short kind, about 1-2 inches long each and there are 10 or so in a package. This isnt the exact brand but it is a general idea https://bit.ly/2MiAbfh of what I used.
-
@Jim-Nowak I used 5 lb of pork shoulder, 5 lb of chuck and one package of beef marrow bones. They were the short kind, about 1-2 inches long each and there are 10 or so in a package. This isnt the exact brand but it is a general idea https://bit.ly/2MiAbfh of what I used.
-
Since I had a great experience with Waltonâs meat sticks and I have a surplus of pork sausage in the freezer, I am planning to make pork hot dogs in a few weeks. Our family butchers every year and I donât want all the sausage I get from half a hog. I would like to make 10 lb of it into hot dogs. Do you think 100% pork would be okay? I have no idea if I am going to leave skins on or not. Still have to do the research!
-
srg158 If you are looking to make all pork hot dogs Iâd recommend this. Rochester is known for making âwhite hotsâ just all pork with Weisswurst seasoning. Iâd recommend a 26mm casing, collagen if you want skin on-my preference, or cellulose if you want skin off. Iâve done both and smoked both. Adds a nice touch, maybe a quick 2 hour smoke. Here is the post from before. you can search white hot and the whole conversation will come up.
Jonathon I know you spent some quality time in the ROC, we were just talking about making some âwhite hotsâ. Iâm sure you know they are all white hot dogs, Zweigles are the locally made favorite. Just wondering if Excaliber could whip up some white hot spice mix? From my research they say they are based on Weisswurst.
-
srg158 If you donât have a juicer and want to triple grind, here are some tips.
Grind once large plate, put meat in freezer on a tray with parchment paper on the bottom, use a pizza cutter to cut into strips that will fit down your grinder.
Second grind on the small plate mix in spice, back into the freezer, same process.
Third grind on small plate then into the stuffer. If you stuff off a grinder Iâd do it as part of the third grind.
Many lessons learned after HOURS of shoving meat through the grinder. Having it slightly frozen allows the grinder to grab and push it through and cleaning cutting the meat. Oh, donât forget to put the grinder head in the freezer too-it DOES make a difference.
Good luck and we expect pics of a successful run!
And if you havenât tried the chili dog spice pack from Waltonâs its our favorite! -
-
-
-
srg158 If you are looking to make all pork hot dogs Iâd recommend this. Rochester is known for making âwhite hotsâ just all pork with Weisswurst seasoning. Iâd recommend a 26mm casing, collagen if you want skin on-my preference, or cellulose if you want skin off. Iâve done both and smoked both. Adds a nice touch, maybe a quick 2 hour smoke. Here is the post from before. you can search white hot and the whole conversation will come up.
Jonathon I know you spent some quality time in the ROC, we were just talking about making some âwhite hotsâ. Iâm sure you know they are all white hot dogs, Zweigles are the locally made favorite. Just wondering if Excaliber could whip up some white hot spice mix? From my research they say they are based on Weisswurst.
-
So the only way to make links is to use natural or cellulose casings, correct?
-
srg158 Collagen can work for a twist but the only way I have seen them hold it through cooking is with a commercial stuffer with a linker attachment
-
Well hot dogs are stuffed. Everything went well until I tried to stuff into 26 mm casing. Ground once on 3/8 then twice on 1/8 plate and mixes by hand twice in between. Left meat in tote outside between grindings and before stuffing to get cold. That old Enterprise stuffer would not push through the tiny stuffing tube.
So had to resort to hog casings. Guess I will have 1/4 lb hot dogs!! At least I got them in casings.
It was a learning experience. I need a better stuffer and a meat mixer.
-
Well hot dogs are stuffed. Everything went well until I tried to stuff into 26 mm casing. Ground once on 3/8 then twice on 1/8 plate and mixes by hand twice in between. Left meat in tote outside between grindings and before stuffing to get cold. That old Enterprise stuffer would not push through the tiny stuffing tube.
So had to resort to hog casings. Guess I will have 1/4 lb hot dogs!! At least I got them in casings.
It was a learning experience. I need a better stuffer and a meat mixer.
Half-a$$ hot dogs. Letâs just say it was a real learning experience. Meat sticks were easy compared to these suckers.
-
This post is deleted!
-
srg158 Dogs can be challenging to get the right consistency if you donât have an emulsifying plate or a bowl chopper. My recommendation would be to grind 3 times and mix like your life depended on it! What specifically caused you issues? Also, the cellulose casings are very good for hot dogs. We sell the 26mm in single tubes instead of entire cases so you can try them. Also, one piece of advice with the cellulose casings, when you are done cooking put them in an ice bath right away, trying to peel these before the ice bath is near impossible but after that, they will glide right out!
-
srg158 Dogs can be challenging to get the right consistency if you donât have an emulsifying plate or a bowl chopper. My recommendation would be to grind 3 times and mix like your life depended on it! What specifically caused you issues? Also, the cellulose casings are very good for hot dogs. We sell the 26mm in single tubes instead of entire cases so you can try them. Also, one piece of advice with the cellulose casings, when you are done cooking put them in an ice bath right away, trying to peel these before the ice bath is near impossible but after that, they will glide right out!
Jonathon the consistency was very good. My problem is the â100 yr oldâ stuffer and the really small stuffing tube just didnât work. The product would just push up around the plate. When I tried to add more water thinking it would help it just got worse. I think if I had better equipment in this case it would have made the difference. On a positive note the stuffer did the job to press lard and we had some nice cracklins to eat!!
-
srg158 Oh come oneâŠcracklinsâŠmy mouth is watering right now. The enterprise stuffer is a workhorse but not designed for dogs. You need a tall, small diameter stuffer. The 11# stuffers work well for this type of thing. I think the larger diameter has too much surface area and canât build pressure. I donât know why I got rid of mine. We sandblasted and powdered coated the exterior. It looked awesome and would have lasted another 100 years. But we got the vertical and then upgraded to the hydraulic.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better đ
Register LoginSponsored By:
