How to Make Homemade Roast Beef
-
How To Make Homemade Roast Beef
Learn how to make Roast Beef with Walton's and Meatgistics. Watch the video, read the guide, and then post your questions or comments below.
What Is Roast Beef?
Roast beef can be made from Eye of the Round, Sirloin or Tri-Tip. It is very popular as both a main meal and is also often made specifically for cold cuts. Eye of the round is not as tender a cut as either Sirloin or a Tri-Tip so unless we process and cook this carefully we could end up with tough roast beef.
Meat Block
Eye of the Round with fat cap attached.
Additives
Butter Flavored Seasoning
Prime Rib Rub
Or
Prime Rib Rub no MSGProcess
We are going to inject this with Butter Flavored soluble seasoning with the Walton’s Syringe Injector. This seasoning can be used on almost any cut of meat, it imparts a great flavor and it already has phosphates in it which will help increase the water holding capacity of the meat which will give us a juicier finished product.
My injection is 1 lb of water and 5 oz of seasoning. The directions say to use this as a 10% pump but since it does not contain any cure I am going to just pump this until it won’t hold anymore. I am going to rub the outside with Prime Rib Rub seasoning, I want to really coat the outside with this since I am going to be slicing it thin and I won’t be getting much of the outside on each slice.
Marinating
Next I am going to vacuum pack it and let it marinate overnight. Since it is so large I am using one of our Vacmaster suction sealers and a vac bag roll. I create the size bag I need by slicing the roll and then sealing one side of the bag, then I place my meat inside and seal the bag. Let this sit overnight and be ready to smoke it in the morning.
Note
If you cannot inject or vacuum pack you might want to let it sit in the marinade longer than 12 hours. If you can let it sit a full 24 hours it will pick up and retain more of the seasoning.
If you do not have a way to control humidity in your smoker then add a water pan and cook at 240° until internal temp is 140° for 12 minutes.
Thermal Processing & Smoking
Stage 1 - 120° - 30 Minutes RH 0
Stage 2 - 140° - 60 Minutes RH 60
Stage 3 - 160° - 30 Minutes RH 60
Stage 4 - 180° Until internal temp is 140° for 12 minutesCooling
Serve right away for traditional meal.
For cold cuts let it sit out at room temperature for an hour before moving to a cooler. For best results let it sit in cooler overnight before slicing for cold cuts.
Wrap up
All in all this was very easy to do and we were able to achieve very similar results with cooking it in our small smoker as we did with our professional smokehouse. The ability to accurately control humidity in the large smokehouse did allow us to cook quicker but the result was similar.
Additional Tips
- If I was making this just for myself I would have stopped at 130° because I like it extra bloody.
Watch WaltonsTV: How To Make Homemade Roast Beef
Shop waltonsinc.com for Dry Marinades
Shop waltonsinc.com for Dry Rubs
Shop waltonsinc.com for Vacuum Sealers
Shop waltonsinc.com for Walton’s Syringe Injector
-
esoriam .625 lb is 10 oz, so I am assuming you are trying to season 12.5 lb of meat, or around that amount? If that is correct then the 1 lb of water is correct as well. The solution will always taste a little stronger before it is injected and then cooked, but if you are turned off by the amount of salt taste you can always add 50% more water to dilute it!
-
esoriam .625 lb is 10 oz, so I am assuming you are trying to season 12.5 lb of meat, or around that amount? If that is correct then the 1 lb of water is correct as well. The solution will always taste a little stronger before it is injected and then cooked, but if you are turned off by the amount of salt taste you can always add 50% more water to dilute it!
-
esoriam Okay, then I would just make sure you aren’t injecting it to anymore than 10% of its weight, so that would be 1/2 lb or 8 oz of solution.
-
esoriam Okay, then I would just make sure you aren’t injecting it to anymore than 10% of its weight, so that would be 1/2 lb or 8 oz of solution.
-
esoriam Yes, since there is no cure there is no parts per million requirements but since you are concerned with saltiness I would keep it at 10% or lower.
-
Tbreak Yes, absolutely it will work in your oven as well. You probably won’t be able to do anything for humidity but you could add a small amount of liquid smoke if you wanted a smoky flavor.
Also, most ovens won’t start that low so you could try propping the door slightly to bleed some heat.
-
Tbreak Yes, absolutely it will work in your oven as well. You probably won’t be able to do anything for humidity but you could add a small amount of liquid smoke if you wanted a smoky flavor.
Also, most ovens won’t start that low so you could try propping the door slightly to bleed some heat.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register LoginSponsored By:
