How I do Brisket.
-
Snake River Farms is part of Agrabeef as is Double R Ranch and they are here in Idaho. The headquarters is in Boise, Idaho about 50 miles from me.
-
Snake River Farms is part of Agrabeef as is Double R Ranch and they are here in Idaho. The headquarters is in Boise, Idaho about 50 miles from me.
Idaho Smokey Yeah, Double R is their choice line, right? They are one of the suppliers for the new KCBS steak series along with Creekstone.
-
Midwest_kc I just checked Costco. The only Wagyu brisket they show are flats and they come in 2 to 3 pieces to total 10 pounds. Cost per pound is $59.99. Waygu brisket is something that I won’t be trying for a long time if ever.
Idaho Smokey Totally agree with the decision. I don’t think that most will appreciate the quality.
-
calldoctoday I am in the same boat on the Prime briskets, for me before everything went nuts, I was able to get Prime briskets for $2.99/lb at Costco. While at HEB(my local grocer) choice briskets were $1.99/lb. So just really for a few more dollars I could get a pretty good brisket. I haven’t bought a brisket since 2020 because of the prices being all over the place. Actually talking about it makes me want to smoke on sooner rather than later.
Yes the marbling is more throughout the brisket in a Prime than a choice. The fat seems also to be softer in a Prime than choice as well. A couple of years ago for Father’s Day I bought a wagyu brisket. BOY HOWDY! That thing didn’t have a single ounce of lean on it. The flat rivaled the point on a Prime brisket.
I guess I am more of closer to hot and fast liking to run the temp in the 250°-275°.
But anyone who has experience with brisket knows that sometimes you just get a really crappy one.
HerbcoFood Yeah Buddy & I am telling you. That must be something. I would love to try that some day. But first, things need to get back down to the way they should be.
-
I just finished my big brisket smoke for the year. This year getting good briskets in my area was difficult. No prime and the choice were small. I did 4 briskets that equaled 52 pounds. I usually have 3 briskets that go close to 60 pounds before trimming.
I trim my briskets out so that most of the hard fat is removed and the fat cap is trimmed to ¼ to ½ inch. I pay attention to the end of the flat when I buy the brisket and when I trim out the brisket. I will trim a thin end off rather than end up with this part of the brisket getting burnt to the point you can’t use it. This is a good video by Franklin BBQ on trimming brisket: https://www.youtube.com/watch?v=yaMgt1Altys .
I get my briskets rubbed at least 2 days before I put them in the smoker. I have used mustard or Worcestershire sauce to wet the surface of the briskets before I hit them with the dry rub but don’t do it this way any more. I will say that should you use the mustard or Worcestershire sauce use just enough to wet the surface You don’t want to end up with the brisket looking like it had been dunked in a vat of mustard. When I do my dry rub now I start with the fat cap down and hit the surfaces of the brisket that are exposed with a liberal coating of dry rub. I then go do something else for 20 or 30 minutes. This lets the salt in the rub work. The salt brings out the surface moisture in the brisket and this soaks into the rub and holds it in place when I turn the brisket fat cap up. I repeat the dry rub and wait on all of the new exposed surfaces and then put the brisket into large zip lock bags. They have 2 and 2 ½ gallon zip locks now. The bagged briskets now go back into the fridge until I am ready to smoke them.
I make the rub using a recipe from “Smoke and Spice” by Cheryl and Bill Jamison. I highly recommend this book. The rub is called Wild Willy’s Number One-derful Rub. This is good basic rub and can be easily modified to suit your taste. This is the recipe I use including notes and changes I have made over the years.
Wild Willy’s Number One-derful rub
¾ cup smoked paprika
¼ cup freshly ground black pepper
¼ cup course salt, either kosher or sea salt
¼ cup sugar (I use Turbanado, or brown sugar)
2 tbls. chili powder
2 tbls. garlic powder
2 tbls. Onion powder
2 tsp. Cayenne
2 tsp. Ground Rosemary
This is a great dry rub for steaks, ribs, brisket, and pork.
I have a CookShack SM066 smoker. I have been using these smokers for going on 20 years. I say this simply to make the point that the following is what works in my smoker and may not work the same way in whatever smoker you are using. These smokers were designed and built as Brisket ovens. They are wood stingy and cook very moist. I do 4 briskets using 8 to 10 oz. of wood. I use wood chunks and will do a mix of whatever I have on hand. Hickory or Pecan mixed with apple or cherry. I figure on a 24 hour smoke time and several hours extra to let the briskets “rest”. I do not worry about the stall and I do not wrap my briskets to get them over the stall. I start out with cold briskets and a cold smoker I want to get as much smoke on the briskets as I can before they hit 160 degrees internal temp. I do my briskets fat cap up. I use a leave in probe style thermometer and set the alarm temp for 190 degrees. I set the smoker temp at 175 degrees and come in the house. I will check the smoker several times over the next couple of hours and if the smoker is not producing good smoke after a couple of hours and I haven’t hit the 160 degrees internal temp I will add another chunk of wood and turn the smoker temp up to 225 degrees. I like my sleep so just before I go to bed I turn the smoker temp down to 195 degrees and go to bed. The next morning I turn the smoker temp back up to 225 degrees and wait for the thermometer alarm to go off. I do not cook brisket by time or internal temperature but by feel. When the alarm goes off I take a toothpick or skewer out to the smoker and probe the brisket. When the probe goes into the brisket and feels like you were probing a warm stick of butter the brisket is done. I have over the years had briskets that probed done at 190 degrees. Most of them probed done at 205 degrees and some big briskets went to 215 degrees before they were done. Since I am doing several briskets they usually get done at different times. I take them out as they get done and put them into disposable aluminum pans and cover them with foil. They then go into a warmed insulated cooler. I warm the cooler with hot water in a pan when I know the briskets are getting close. I will leave the briskets in the cooler for a minimum of 2 hours and they will stay hot up to 8 hours in the cooler. I can’t prove it by any scientific method but I think the time in the cooler actually makes the briskets better. Better flavor and more tender for sure and may enhance the moistness of the meat.
Idaho Smokey thx for the great writeup!
I had a 16lb prime packer from Costco. I decided to use your rub recipe and it is on the Traeger right now! I split it into the point, which I’m about to corn, and cut the flat in 2 for the smoker.
I decided to go 325, hot and fast, per Midwest_kc , since I have this prime brisket. Haven’t really tried that at start before. Well, I’m going to do 225 for an hour for better smoke from my Traeger, then go 325. Although I’m thinking about sous vide on the smaller part just to compare…
-
Idaho Smokey thx for the great writeup!
I had a 16lb prime packer from Costco. I decided to use your rub recipe and it is on the Traeger right now! I split it into the point, which I’m about to corn, and cut the flat in 2 for the smoker.I decided to go 325, hot and fast, per Midwest_kc , since I have this prime brisket. Haven’t really tried that at start before. Well, I’m going to do 225 for an hour for better smoke from my Traeger, then go 325. Although I’m thinking about sous vide on the smaller part just to compare…
Dave in AZ good luck
! Good call going lower for a short amount of time on the pellet grill. At high Temps they burn so clean that they don’t out much smoke flavor on it. A charcoal/wood smoker doesn’t have that specific problem. On my GMG I can run 275 and get good flavor still though, so don’t be afraid to ramp up a bit if you want.Remember: higher cooking Temps mean higher finishing Temps. Cook to tenderness (probing with your thermometer until it slides in and out like butter) vs temp. Don’t freak out if it gets to 207-208 or higher before it breaks.
Also,rest is important here. At least an hour, 2-3 if you ha e the time.
-
Dave in AZ good luck
! Good call going lower for a short amount of time on the pellet grill. At high Temps they burn so clean that they don’t out much smoke flavor on it. A charcoal/wood smoker doesn’t have that specific problem. On my GMG I can run 275 and get good flavor still though, so don’t be afraid to ramp up a bit if you want.Remember: higher cooking Temps mean higher finishing Temps. Cook to tenderness (probing with your thermometer until it slides in and out like butter) vs temp. Don’t freak out if it gets to 207-208 or higher before it breaks.
Also,rest is important here. At least an hour, 2-3 if you ha e the time.
Midwest_kc thx much! Somewhere between 1 and 1.5 hrs I ran out of pellets doh! Came out to 90f, so restarting, lots of pellets in bags luckily. Note to self: don’t do smoked brisket, dry cure pastrami, and dry cure corned beef all at once… something will be missed lol!
-
Idaho Smokey thx for the great writeup!
I had a 16lb prime packer from Costco. I decided to use your rub recipe and it is on the Traeger right now! I split it into the point, which I’m about to corn, and cut the flat in 2 for the smoker.I decided to go 325, hot and fast, per Midwest_kc , since I have this prime brisket. Haven’t really tried that at start before. Well, I’m going to do 225 for an hour for better smoke from my Traeger, then go 325. Although I’m thinking about sous vide on the smaller part just to compare…
Dave in AZ : I have never done just a brisket flat or a whole packer fast and hot. The smoker I do my briskets in is a Cookshack SMO66. This is a cabinet type smoker and it only goes to 300 degrees. The smoker does cook with a very moist environment. I do remember reading about people that cooked flats on the old Cookshack forum. I just remember that there were complaints about the flats turning out dry. You might want to have a plan ready if you notice that your flat is drying out. Something to spritz it with or a pan you can put it in with a little liquid. I am just guessing on this since I haven’t done brisket the way you are doing them. I can second Midwest-kc on the let it rest for a couple of hours. I use an old ice chest for this. I put a pan of hot water in the chest to get things warm and place the briskets in a pan that will fit into the chest. Cover the pan with foil and put it into the chest to get happy. You can use this method to hold meat in for 4 to 6 hours. Works great if you need to transport something from the smoker or grill to a gathering.
-
Thx! I’ve done briskets low and slow for 10 to 12 hrs, on smoker, on smoker then foil wrap, smoker foil wrap oven, etc. Like you mentioned, drying out is the issue. I usually pull the meat off smoker at 3 to 4 hrs, wrap in foil, and finish in oven-- plenty of smoke, stays moist. After 3 or 4 hrs on smoker I don’t feel I’m getting much smoke, just drier. In past I’ve finished in oven at 225 or so, but am going to try this faster 325.
Thx again! There were not that many brisket threads here, so I sure appreciate your comments, all! -
I promise this to work every single time and to make a spoon tender brisket without fail.
Apply some type of rub/coating, doesn’t matter whatever you like so it dries the surface, if not the wet meat and smoke can be bitter.
Smoke @ 230f until internal temp of 160-170f
Wrap in pink paper or if you do not mind losing your crispy bark then Texas crutch it.
Continue to cook or smoke in the smoker or oven it doesn’t matter at this point until the IT reaches 203-205f
Lower temp to 170 either in smoker or oven for at least 4 hours, 8 hours is better and you can go up to 12 hours doesn’t hurt. This resting period is so flexible that it allows you to do you brisket the day before and still have a better brisket that most have ever tasted.
Brisket is full of fat and collagen and the resting period continues the break down these components so the meat just keeps marinating.
Yes you can smoke/cook up to 275-300 to speed the cook, but the resting period still remains the same.
Injecting the brisket and then marinating does help the flavor, but it is by no means a deal breaker. -
I promise this to work every single time and to make a spoon tender brisket without fail.
Apply some type of rub/coating, doesn’t matter whatever you like so it dries the surface, if not the wet meat and smoke can be bitter.
Smoke @ 230f until internal temp of 160-170f
Wrap in pink paper or if you do not mind losing your crispy bark then Texas crutch it.
Continue to cook or smoke in the smoker or oven it doesn’t matter at this point until the IT reaches 203-205f
Lower temp to 170 either in smoker or oven for at least 4 hours, 8 hours is better and you can go up to 12 hours doesn’t hurt. This resting period is so flexible that it allows you to do you brisket the day before and still have a better brisket that most have ever tasted.
Brisket is full of fat and collagen and the resting period continues the break down these components so the meat just keeps marinating.
Yes you can smoke/cook up to 275-300 to speed the cook, but the resting period still remains the same.
Injecting the brisket and then marinating does help the flavor, but it is by no means a deal breaker.mrobisr Idaho Smokey Midwest_kc
Well, it turned out great!
Smoked at 225 for 3 hrs. Wrapped in foil, raised temp to 325. Hit 202 in 1.5 hrs, I probed it like said above, let it go to 208, softer and nice. Wrapped in towel, put in cooler. Rested for 3 hrs, temp was down to 168. That’s all my family could take, so sliced up and ate, vacuum sealed extra.Loved the rub, very texas flavor, my favorite. Thx everyone for great recipe, input and making an afternoon cook feel like a team project! Wish I could have stood you all a beverage!
-
mrobisr Idaho Smokey Midwest_kc
Well, it turned out great!
Smoked at 225 for 3 hrs. Wrapped in foil, raised temp to 325. Hit 202 in 1.5 hrs, I probed it like said above, let it go to 208, softer and nice. Wrapped in towel, put in cooler. Rested for 3 hrs, temp was down to 168. That’s all my family could take, so sliced up and ate, vacuum sealed extra.Loved the rub, very texas flavor, my favorite. Thx everyone for great recipe, input and making an afternoon cook feel like a team project! Wish I could have stood you all a beverage!
Dave in AZ came out looking good. Bet the fam was happy.
-
I am using my costco cash back to buy a brisket, hopefully sometime soon.
-
mrobisr Idaho Smokey Midwest_kc
Well, it turned out great!
Smoked at 225 for 3 hrs. Wrapped in foil, raised temp to 325. Hit 202 in 1.5 hrs, I probed it like said above, let it go to 208, softer and nice. Wrapped in towel, put in cooler. Rested for 3 hrs, temp was down to 168. That’s all my family could take, so sliced up and ate, vacuum sealed extra.Loved the rub, very texas flavor, my favorite. Thx everyone for great recipe, input and making an afternoon cook feel like a team project! Wish I could have stood you all a beverage!
-
Having all these super experienced guys who do a ton of briskets, giving advice… well, it is an amazing confidence booster when doing a cook uou don’t do so often! Like I sure didn’t want to make a silly mistake, having all these posts to let you know you’re on track is about the only thing that lets me spring for a prime piece of meat!
We had brisket on toasted corn tortilla tonight. I used the juice from the wrapped cook to add to beans for some great ranch style beans too.
-
Having all these super experienced guys who do a ton of briskets, giving advice… well, it is an amazing confidence booster when doing a cook uou don’t do so often! Like I sure didn’t want to make a silly mistake, having all these posts to let you know you’re on track is about the only thing that lets me spring for a prime piece of meat!
We had brisket on toasted corn tortilla tonight. I used the juice from the wrapped cook to add to beans for some great ranch style beans too.Dave in AZ I don’t know who’s more excited about the “process”. The guys that helped or YOU. That’s what this blog is all about. I would say: Great job all around the table. Yay for all.
-
Dave in AZ I don’t know who’s more excited about the “process”. The guys that helped or YOU. That’s what this blog is all about. I would say: Great job all around the table. Yay for all.
This post is deleted! -
Dave in AZ I don’t know who’s more excited about the “process”. The guys that helped or YOU. That’s what this blog is all about. I would say: Great job all around the table. Yay for all.
-
PapaSop Sorry that I used that bad word! Community is a much better term. Have a great rest of your day.
zbigjeff said in How I do Brisket.:
PapaSop Sorry that I used that bad word! Community is a much better term. Have a great rest of your day.
After I thought about it, was thinking that “F” word the whole time. Blog is fine, Such my delete. LOL
-
zbigjeff said in How I do Brisket.:
PapaSop Sorry that I used that bad word! Community is a much better term. Have a great rest of your day.
After I thought about it, was thinking that “F” word the whole time. Blog is fine, Such my delete. LOL
PapaSop I long to sit in your backyard watching a very slow smoke while sipping your pick and just solving the woes if the world. The sarcasm would be epic. Smile!!!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register LoginSponsored By:
