Knocked out 50lb of sausage today - Andouille and Sheboygan Brat
-
Local grocery had a $1.49/lb sale on butts and that is as good as it gets lately. They were bone-in cryo two packs so picked through to find what I thought would land me with enough for two 25lb batches. after deboning. Now I do have to mention with ZERO exaggeration: I literally landed at 50lb of meat block after deboning - ON THE NOSE. Pat myself on back right there.
For the Sheboygan Brats I did a single 4.5mm grind and stuffed into 32-35mm casings. This is a new recipe for me (both from Walton’s).
The Andouille I did maybe 5lb through the 4.5mm plate and the rest through a 10mm for a nice chunky texture. Made this Andouille once before but as a fresh brat and it is absolutely amazing… This time I added a pack of sure cure and will smoke them tomorrow. Planning to use the advice on smoke schedule twilliams s gave me in my Smoked Kielbasa thread and see how it goes:
- Do me a favor and next time try this smoke schedule
110* for 1 hour vents all open (drying phase)
125* for 2 hours (with smoke) close dampers to half on bottom 1/8th open on top
140* for 1 hour (with smoke)
155* for 2 hours (no smoke)
170* until IT reaches your desired finished temp. 157*-160*
Ice bath immediately
Also been trying to be more consistent on size so I cut a piece of tube the casings come on to size I want and use that as a guide (visible in pics). Went longer for Andouille.
Sheboygan Brats:
And the Andouille:
- Do me a favor and next time try this smoke schedule
-
Local grocery had a $1.49/lb sale on butts and that is as good as it gets lately. They were bone-in cryo two packs so picked through to find what I thought would land me with enough for two 25lb batches. after deboning. Now I do have to mention with ZERO exaggeration: I literally landed at 50lb of meat block after deboning - ON THE NOSE. Pat myself on back right there.
For the Sheboygan Brats I did a single 4.5mm grind and stuffed into 32-35mm casings. This is a new recipe for me (both from Walton’s).
The Andouille I did maybe 5lb through the 4.5mm plate and the rest through a 10mm for a nice chunky texture. Made this Andouille once before but as a fresh brat and it is absolutely amazing… This time I added a pack of sure cure and will smoke them tomorrow. Planning to use the advice on smoke schedule twilliams s gave me in my Smoked Kielbasa thread and see how it goes:
- Do me a favor and next time try this smoke schedule
110* for 1 hour vents all open (drying phase)
125* for 2 hours (with smoke) close dampers to half on bottom 1/8th open on top
140* for 1 hour (with smoke)
155* for 2 hours (no smoke)
170* until IT reaches your desired finished temp. 157*-160*
Ice bath immediately
Also been trying to be more consistent on size so I cut a piece of tube the casings come on to size I want and use that as a guide (visible in pics). Went longer for Andouille.
Sheboygan Brats:
And the Andouille:
Jamieson22 man that is alot of brats. They look great and what a job linking. Congrats
- Do me a favor and next time try this smoke schedule
-
Jamieson22 man that is alot of brats. They look great and what a job linking. Congrats
cdavis said in Knocked out 50lb of sausage today - Andouille and Sheboygan Brat:
Jamieson22 man that is alot of brats. They look great and what a job linking. Congrats
Yeah I bought the meat block without thinking it through much. Realized I am out of town next weekend so had an “Oh crap, guess I’m making 50lb this weekend” moment last week. Plan was to make Saturday and smoke Sunday but got lazy. So will work from home tomorrow to do the smoke.
-
Local grocery had a $1.49/lb sale on butts and that is as good as it gets lately. They were bone-in cryo two packs so picked through to find what I thought would land me with enough for two 25lb batches. after deboning. Now I do have to mention with ZERO exaggeration: I literally landed at 50lb of meat block after deboning - ON THE NOSE. Pat myself on back right there.
For the Sheboygan Brats I did a single 4.5mm grind and stuffed into 32-35mm casings. This is a new recipe for me (both from Walton’s).
The Andouille I did maybe 5lb through the 4.5mm plate and the rest through a 10mm for a nice chunky texture. Made this Andouille once before but as a fresh brat and it is absolutely amazing… This time I added a pack of sure cure and will smoke them tomorrow. Planning to use the advice on smoke schedule twilliams s gave me in my Smoked Kielbasa thread and see how it goes:
- Do me a favor and next time try this smoke schedule
110* for 1 hour vents all open (drying phase)
125* for 2 hours (with smoke) close dampers to half on bottom 1/8th open on top
140* for 1 hour (with smoke)
155* for 2 hours (no smoke)
170* until IT reaches your desired finished temp. 157*-160*
Ice bath immediately
Also been trying to be more consistent on size so I cut a piece of tube the casings come on to size I want and use that as a guide (visible in pics). Went longer for Andouille.
Sheboygan Brats:
And the Andouille:
Jamieson22 great looking batch. Let us know how the smoke goes.
- Do me a favor and next time try this smoke schedule
-
cdavis said in Knocked out 50lb of sausage today - Andouille and Sheboygan Brat:
Jamieson22 man that is alot of brats. They look great and what a job linking. Congrats
Yeah I bought the meat block without thinking it through much. Realized I am out of town next weekend so had an “Oh crap, guess I’m making 50lb this weekend” moment last week. Plan was to make Saturday and smoke Sunday but got lazy. So will work from home tomorrow to do the smoke.
Jamieson22 good luck on the smoke
-
Local grocery had a $1.49/lb sale on butts and that is as good as it gets lately. They were bone-in cryo two packs so picked through to find what I thought would land me with enough for two 25lb batches. after deboning. Now I do have to mention with ZERO exaggeration: I literally landed at 50lb of meat block after deboning - ON THE NOSE. Pat myself on back right there.
For the Sheboygan Brats I did a single 4.5mm grind and stuffed into 32-35mm casings. This is a new recipe for me (both from Walton’s).
The Andouille I did maybe 5lb through the 4.5mm plate and the rest through a 10mm for a nice chunky texture. Made this Andouille once before but as a fresh brat and it is absolutely amazing… This time I added a pack of sure cure and will smoke them tomorrow. Planning to use the advice on smoke schedule twilliams s gave me in my Smoked Kielbasa thread and see how it goes:
- Do me a favor and next time try this smoke schedule
110* for 1 hour vents all open (drying phase)
125* for 2 hours (with smoke) close dampers to half on bottom 1/8th open on top
140* for 1 hour (with smoke)
155* for 2 hours (no smoke)
170* until IT reaches your desired finished temp. 157*-160*
Ice bath immediately
Also been trying to be more consistent on size so I cut a piece of tube the casings come on to size I want and use that as a guide (visible in pics). Went longer for Andouille.
Sheboygan Brats:
And the Andouille:
Jamieson22 now ya got me nervous, all eyes are on deck….lol
- Do me a favor and next time try this smoke schedule
-
Jamieson22 now ya got me nervous, all eyes are on deck….lol
twilliams No need to be nervous. I appreciate the input/help! Generally I slay on the smokers but turning out nice smoked sausages has eluded me. I’ll happily take the experienced advice I get to learn this PK100!
-
Getting ready to start the smoke and got a chance to use my sawhorse setup for loading up the hanging rods. Nice and easy!
-
Local grocery had a $1.49/lb sale on butts and that is as good as it gets lately. They were bone-in cryo two packs so picked through to find what I thought would land me with enough for two 25lb batches. after deboning. Now I do have to mention with ZERO exaggeration: I literally landed at 50lb of meat block after deboning - ON THE NOSE. Pat myself on back right there.
For the Sheboygan Brats I did a single 4.5mm grind and stuffed into 32-35mm casings. This is a new recipe for me (both from Walton’s).
The Andouille I did maybe 5lb through the 4.5mm plate and the rest through a 10mm for a nice chunky texture. Made this Andouille once before but as a fresh brat and it is absolutely amazing… This time I added a pack of sure cure and will smoke them tomorrow. Planning to use the advice on smoke schedule twilliams s gave me in my Smoked Kielbasa thread and see how it goes:
- Do me a favor and next time try this smoke schedule
110* for 1 hour vents all open (drying phase)
125* for 2 hours (with smoke) close dampers to half on bottom 1/8th open on top
140* for 1 hour (with smoke)
155* for 2 hours (no smoke)
170* until IT reaches your desired finished temp. 157*-160*
Ice bath immediately
Also been trying to be more consistent on size so I cut a piece of tube the casings come on to size I want and use that as a guide (visible in pics). Went longer for Andouille.
Sheboygan Brats:
And the Andouille:
- Do me a favor and next time try this smoke schedule
-
Local grocery had a $1.49/lb sale on butts and that is as good as it gets lately. They were bone-in cryo two packs so picked through to find what I thought would land me with enough for two 25lb batches. after deboning. Now I do have to mention with ZERO exaggeration: I literally landed at 50lb of meat block after deboning - ON THE NOSE. Pat myself on back right there.
For the Sheboygan Brats I did a single 4.5mm grind and stuffed into 32-35mm casings. This is a new recipe for me (both from Walton’s).
The Andouille I did maybe 5lb through the 4.5mm plate and the rest through a 10mm for a nice chunky texture. Made this Andouille once before but as a fresh brat and it is absolutely amazing… This time I added a pack of sure cure and will smoke them tomorrow. Planning to use the advice on smoke schedule twilliams s gave me in my Smoked Kielbasa thread and see how it goes:
- Do me a favor and next time try this smoke schedule
110* for 1 hour vents all open (drying phase)
125* for 2 hours (with smoke) close dampers to half on bottom 1/8th open on top
140* for 1 hour (with smoke)
155* for 2 hours (no smoke)
170* until IT reaches your desired finished temp. 157*-160*
Ice bath immediately
Also been trying to be more consistent on size so I cut a piece of tube the casings come on to size I want and use that as a guide (visible in pics). Went longer for Andouille.
Sheboygan Brats:
And the Andouille:
- Do me a favor and next time try this smoke schedule
-
Nice! Leave a review of the taste of those Sheboygan brats! I have been eyeing that seasoning.
-
Nice! Leave a review of the taste of those Sheboygan brats! I have been eyeing that seasoning.
ND Mike said in Knocked out 50lb of sausage today - Andouille and Sheboygan Brat:
Nice! Leave a review of the taste of those Sheboygan brats! I have been eyeing that seasoning.
I’m curious as well.
-
Getting ready to start the smoke and got a chance to use my sawhorse setup for loading up the hanging rods. Nice and easy!
Jamieson22 wonderful outdoor kitchen
-
ND Mike said in Knocked out 50lb of sausage today - Andouille and Sheboygan Brat:
Nice! Leave a review of the taste of those Sheboygan brats! I have been eyeing that seasoning.
I’m curious as well.
-
So I am now 9+ hours in and sitting at 136F IT on the links. I opened it just once a bit ago to remove dust pan and checked temp on another link and read the same.
Color looked really nice which is a plus.This time I also hung an ambient probe that is kind floating in the middle of chamber as I wrapped it around a dowel. When I set smoker to 155F it read 142-148. To get to 170F I had to set smoker to 195F. Not sure if I am just way impatient or should I be planning for crazy long cooks? Any thoughts?
I fired up my P&S pellet smoker and may move them to it on 30 min or so if they don’t start moving up more.
-
Well ended up turning the PK100 up to 215F which gave me a temp reading of 195-198F on my Thermoworks Smoke ambient probe. That seemed to push them through as 125F to 135F took hours. Pulled them at 155F IT and did a cold water bath. Final cook time was 11h20m for 25lb in 42-45mm casings. Currently sitting on counter for a bit before going in fridge.
Color is fantastic so twilliams think your advice of less water in dust made a diff. Have a few pale spots but that was due to overlapping .I did get a lot more case wrinkle than I’d like and imagine the higher temps had a lot to do with it. Guessing I got some fat out on a few in hotter spots in smoker. Not sure what to change next time for a better batch.
-
Well ended up turning the PK100 up to 215F which gave me a temp reading of 195-198F on my Thermoworks Smoke ambient probe. That seemed to push them through as 125F to 135F took hours. Pulled them at 155F IT and did a cold water bath. Final cook time was 11h20m for 25lb in 42-45mm casings. Currently sitting on counter for a bit before going in fridge.
Color is fantastic so twilliams think your advice of less water in dust made a diff. Have a few pale spots but that was due to overlapping .I did get a lot more case wrinkle than I’d like and imagine the higher temps had a lot to do with it. Guessing I got some fat out on a few in hotter spots in smoker. Not sure what to change next time for a better batch.
Jamieson22 did you use the 1250watt setting from start? Maybe next time try your ambient probe trick at the beginning and adjust smoker temp to hit the desired cabin temps. I think 195* was a bit much and pushed a bit of fat out. When you cook them they may plump up and not be wrinkled
-
Well ended up turning the PK100 up to 215F which gave me a temp reading of 195-198F on my Thermoworks Smoke ambient probe. That seemed to push them through as 125F to 135F took hours. Pulled them at 155F IT and did a cold water bath. Final cook time was 11h20m for 25lb in 42-45mm casings. Currently sitting on counter for a bit before going in fridge.
Color is fantastic so twilliams think your advice of less water in dust made a diff. Have a few pale spots but that was due to overlapping .I did get a lot more case wrinkle than I’d like and imagine the higher temps had a lot to do with it. Guessing I got some fat out on a few in hotter spots in smoker. Not sure what to change next time for a better batch.
Jamieson22 good job by the way, practice and trying new things is good. I need to figure out my fresh bratwurst texture.
-
Jamieson22 did you use the 1250watt setting from start? Maybe next time try your ambient probe trick at the beginning and adjust smoker temp to hit the desired cabin temps. I think 195* was a bit much and pushed a bit of fat out. When you cook them they may plump up and not be wrinkled
twilliams said in Knocked out 50lb of sausage today - Andouille and Sheboygan Brat:
Jamieson22 did you use the 1250watt setting from start? Maybe next time try your ambient probe trick at the beginning and adjust smoker temp to hit the desired cabin temps. I think 195* was a bit much and pushed a bit of fat out. When you cook them they may plump up and not be wrinkled
Yep 1250w the whole way. I was watching temps and things were in line until I went to 155F though didn’t adjust for a bit as was working and didn’t notice.
Definitely a good idea for next time to shoot for actual vs what is on the display. Also curious if other PK100 owners notice a big difference. I generally never monitor pit temps. I also left my sawdust pan in until well after it burned out. Maybe next time will pull it per smoke schedule as not cure if it sitting on burner makes a big diff. Imagine it can’t help. I’ll figure this damn thing out.
I’ve been turning out really good brats with a 4.5mm or 6mm single grind. Comes pretty close to Johnsonville texture (6mm is better). I try to avoid over emulsified.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register LoginSponsored By:
