Smoker cleaning
-
Finally got to it with a high of 86 today. 40’s to 80’s is a bit of an adjustment. No chemicals used. Just used a plastic scraper and wiped down. Hate to lose that patina but it was time. Still don’t know why they feel the need to put glass in the door. Will be covered first smoke.
Miller time.
PapaSop IT’S A FIRE PIT!!! Knock off the loose stuff if it bothers you but to re-season or contaminate your smoker??? Why. . . . What was done 50-75yrs ago??? Did they scrub the bricks, the corrugated tin, cardboard, or 55gl barrel insides, I think not fellow sausage Warrior.
-
PapaSop You got rid of all the good “flavor”!!! 84 here in Colorado today so yes it Miller Time here too!
Bob Stehlik It’s always 1700hrs some where… Pick your time zone, Alfa thru Zulu
-
Finally got to it with a high of 86 today. 40’s to 80’s is a bit of an adjustment. No chemicals used. Just used a plastic scraper and wiped down. Hate to lose that patina but it was time. Still don’t know why they feel the need to put glass in the door. Will be covered first smoke.
Miller time.
PapaSop I agree totally, just a marketing gimic. I picked mine up at a show and the price was right, but I told the rep that is the most useless thing that you need on a smoker.
-
PapaSop You got rid of all the good “flavor”!!! 84 here in Colorado today so yes it Miller Time here too!
Bob Stehlik does the black creasote really give meat flavor? I know that people talk about seasoning it and such but I don’t quite understand where a creasote lined smoker gives off a flavor profile on meat. Im thinking when they talk about seasoning it is for new smokers to get any impurities burned off from the factory. I know it’s time to get mine cleaned up as I get creasote dripping on to my meat products which gives it a bitter taste. I will have to do some research on this but I’m sure it’s just gonna come to be opinion and not fact studied research and testing. I hope I’m wrong and will consider leaving it alone.
-
Finally got to it with a high of 86 today. 40’s to 80’s is a bit of an adjustment. No chemicals used. Just used a plastic scraper and wiped down. Hate to lose that patina but it was time. Still don’t know why they feel the need to put glass in the door. Will be covered first smoke.
Miller time.
PapaSop that wind was absolutely rediculous, doing a full front steering job and wheel bearings on the truck. It’s bad enough getting grease and dirt falling in your face but to have it blowing too…ugh. I lost a big 12” limb on my tree today, actually as bad that tree is I’m surprised it took this long. Will have to do one cut at the bottom sooner or later.
-
twilliams Are you trying to start a riot?! Some people insist it does some people say that is nonsense. I won’t add my .02 but I WILL say, I dont clean my PK100 unless I am forced too.
Get more help with your processing questions and learn more about processing meat by subscribing to our waltonsinc.com youtube page at https://wltns.link/waltonstv I am a Gorilla, love yourself
-
twilliams Are you trying to start a riot?! Some people insist it does some people say that is nonsense. I won’t add my .02 but I WILL say, I dont clean my PK100 unless I am forced too.
Jonathon no riot starting here, just a lack of understanding, knowledge and evidence proving the theory. As stated people saying one thing and others saying another, how can we test this theory accurately? My thoughts is the smoke generated in mid air is what adheres to the meat surface not remnants from the interior cabin.
-
twilliams Are you trying to start a riot?! Some people insist it does some people say that is nonsense. I won’t add my .02 but I WILL say, I dont clean my PK100 unless I am forced too.
-
I think most folks who claim the mystical qualities of leaving the smoker residue alone actually leave it there for the same reason I do.
That reason being, its a dirty job and I am lazy.
On the rare occasion when I do clean my smokers, it is to avoid a potential grease fire or when creosote flakes start falling on to the meat.
-
I loved looking at this thread. It just shows the true experience and how different approaches to the same problem get er done. I just occasionally take a cheap wide grill brush and knock down the flakes as needed and wipe it down. I forget who pointed out that seasoning metal is not the same as seasoning meat, but that was dead on.
-
When I need to clean my Masterbuilt LP, I crank up the heat full blast for a couple hours and then scrape it down.
-
twilliams I clean my smokers when the residue on the top and sides ends up being little black flakes on my food; cheese, fish etc. I usually just scrape it down with an old gift card or plastic scraper and vacuum out. I do have a couple of Traegers so I vacuum out the ash after every 3-4 long smokes.
Improvise, Adapt and Overcome! Semper Fi
-
twilliams I clean my smokers when the residue on the top and sides ends up being little black flakes on my food; cheese, fish etc. I usually just scrape it down with an old gift card or plastic scraper and vacuum out. I do have a couple of Traegers so I vacuum out the ash after every 3-4 long smokes.
Bob Stehlik
Yep, exactly my reason for doing this. Those little black flakes are not very appealing on a nice chunk of meat. First time cleaning since getting this unit 2+ years ago. -
twilliams I clean my smokers when the residue on the top and sides ends up being little black flakes on my food; cheese, fish etc. I usually just scrape it down with an old gift card or plastic scraper and vacuum out. I do have a couple of Traegers so I vacuum out the ash after every 3-4 long smokes.
Bob Stehlik PapaSop i dont get dry flakes, mine is all gooey resins that liquify and drip when heated up
-
I clean my smoker every spring and the racks every time I use the smoker
-
I wipe down mine in the spring, focusing in the temp sensors/probe, seals and glass using some vinegar water. I clean the racks almost after every use. Only shiny metal are the racks and temp sensors/probe.
-
Bob Stehlik PapaSop i dont get dry flakes, mine is all gooey resins that liquify and drip when heated up
twilliams
Interesting. Perhaps the heat source? No idea. Need a chemical engineer here. -
PapaSop that would be Chef. He is one. Ask him your question
-
Bob Stehlik PapaSop i dont get dry flakes, mine is all gooey resins that liquify and drip when heated up
twilliams What is your fuel source?
-
Just guessing here, but I think temperature of the smoke and the smoker has a lot to do with whether you have dry residue or stickier smoke residue. Also how much grease vaporizes out of the product in the smoker during the cooking process.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register LoginSponsored By:
