Need an adaptor
-
Clarko do you have a cabelas grinder? Old or new carnivore?
-
I found a website that makes adaptor to go from LEM grinder to Cabelas mixer but not the other way around. I sent email to them asking. The plastic adaptor is reasonable at 45.00 they make a metal one at 202.00. I like the LEM mixer and would be willing to pay the extra price. I have seen one in action but up to now the only way i can see to get one to work is to sell my Carnivore 1 hp and buy the LEM grinder to go with it. The hunt goes on.
-
For you guys experimenting with mounting different power sources to mechanical equipment, these guys have proven to be a good source for parts and they don’t charge an arm and a leg. I used one of their low speed gear motors to build a pellet auger feeder system for my electric smoker. [link text]https://www.surpluscenter.com/power-transmission/(link url)
-
I found a website that makes adaptor to go from LEM grinder to Cabelas mixer but not the other way around. I sent email to them asking. The plastic adaptor is reasonable at 45.00 they make a metal one at 202.00. I like the LEM mixer and would be willing to pay the extra price. I have seen one in action but up to now the only way i can see to get one to work is to sell my Carnivore 1 hp and buy the LEM grinder to go with it. The hunt goes on.
Ozzyno Stugots i found the cheapest way is to order the cabelas mixer. Ive put 2 15lb batches thru mine and it seems solid.
-
I found a website that makes adaptor to go from LEM grinder to Cabelas mixer but not the other way around. I sent email to them asking. The plastic adaptor is reasonable at 45.00 they make a metal one at 202.00. I like the LEM mixer and would be willing to pay the extra price. I have seen one in action but up to now the only way i can see to get one to work is to sell my Carnivore 1 hp and buy the LEM grinder to go with it. The hunt goes on.
Ozzyno Stugots i think the 44lb weston will fit also. Not 100% tho. I have a #12 cabelas pre carnivore grinder (weston butcher) and also a #22 1hp carnivore. My cabelas 50lb mixer fits both perfectly.
-
I found a website that makes adaptor to go from LEM grinder to Cabelas mixer but not the other way around. I sent email to them asking. The plastic adaptor is reasonable at 45.00 they make a metal one at 202.00. I like the LEM mixer and would be willing to pay the extra price. I have seen one in action but up to now the only way i can see to get one to work is to sell my Carnivore 1 hp and buy the LEM grinder to go with it. The hunt goes on.
Ozzyno Stugots you wont have reverse with the Lem. Thats why i stuck with the carnivore for my mixing. I grind with my #12 non carnivore
-
Ozzyno Stugots you wont have reverse with the Lem. Thats why i stuck with the carnivore for my mixing. I grind with my #12 non carnivore
smokinbubba It’s unfortunately a learning curve. Sometimes an expense one. Most of my processing equipment is one brand. At least i can hold them accountable for backward compatibility. I may not like, and wish i had reverse on my grinder but it is what it is… I feel your pain. Comes down to: want, vs, need, vs, like. Don’t buy for now, think about 5 years in the future. I would never pop $200 for an adapter. Money better spent on an upgrade. A permanent fix, not a patch
-
yeah your right, the LEM mixer is not really a need, more of a preferrence, guess i will wait until Cabelas comes out with a 25 pound mixer, until then i still have my old faithful hand crank mixer.
-
yeah your right, the LEM mixer is not really a need, more of a preferrence, guess i will wait until Cabelas comes out with a 25 pound mixer, until then i still have my old faithful hand crank mixer.
Ozzyno Stugots I have the cabelas 50lb and usually do 15lb batches. It works well just a little over kill. If they offered a 25lb, I would have jumped on it and will get one if they ever come out with one. I doubt that will ever happen. I think Cabelas does not care that much. LEM is a great company based in Cinci. I once met the owner Larry. He is like you and me, a lover of fine meat products. He isnt big corporate. He listens to his customers. If the LEM had a reverse and was priced more competitivly, I would have went with their products. I am very happy with my Cabelas equipment tho.
-
I think it’s time to put on my Engineering cap and come up with a hack for reverse on these mixers. Should take a couple dpdt switches and elective surgery.
-
I think it’s time to put on my Engineering cap and come up with a hack for reverse on these mixers. Should take a couple dpdt switches and elective surgery.
JoeB said in Need an adaptor:
I think it’s time to put on my Engineering cap and come up with a hack for reverse on these mixers. Should take a couple dpdt switches and elective surgery.
It’s been a while, but if it uses a split phase motor with a centrifugal switch in the start winding circuit, you can add the switch there to reverse the motor.
Paul
-
JoeB said in Need an adaptor:
I think it’s time to put on my Engineering cap and come up with a hack for reverse on these mixers. Should take a couple dpdt switches and elective surgery.
It’s been a while, but if it uses a split phase motor with a centrifugal switch in the start winding circuit, you can add the switch there to reverse the motor.
processhead all mixers are not created equal. Time to prepare the operating room🥲
-
processhead all mixers are not created equal. Time to prepare the operating room🥲
JoeB Time for exploratory surgery.
-
JoeB Time for exploratory surgery.
-
-
processhead they make a all in one motor reverse switch. But it would take a 6 conductors power cord
-
processhead The scope in the first vid is older than i am… And that’s old
-
JoeB said in Need an adaptor:
I think it’s time to put on my Engineering cap and come up with a hack for reverse on these mixers. Should take a couple dpdt switches and elective surgery.
It’s been a while, but if it uses a split phase motor with a centrifugal switch in the start winding circuit, you can add the switch there to reverse the motor.
processhead said in Need an adaptor:
JoeB said in Need an adaptor:
I think it’s time to put on my Engineering cap and come up with a hack for reverse on these mixers. Should take a couple dpdt switches and elective surgery.
It’s been a while, but if it uses a split phase motor with a centrifugal switch in the start winding circuit, you can add the switch there to reverse the motor.
All i know about electricity is you dont want to get it on you.
-
Been there and got the torn tee for it.
-
Old electricians words of wisdom " Don’t be the circuit"
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register LoginSponsored By:
