Fire Brick
-
Jonathon Where is the sensor? It’s good know that it’s not near the heating element (as that would be a bigger problem), but I also want to place my probe away from both the heating element and the native sensor.
Thanks!
-
-
With the bricks at the bottom they don’t appear to be as steep but it wasn’t the flattening of the curve I was hoping for.
-
This post is deleted!
-
If I am reading your graph right it looks like you are getting approximately 6 deg of swing, your first run looks to be approx. 20 or more
What am I getting wrong? -
TexLaw The sensor is on the back wall about 3/4th to 4/5th of the way up, right around where the second rack would go.
Jonathon Thanks!
-
-
Woo-hoo! I did something right! Maybe all those years of skoolin’ will finally pay off!
That is encouraging to see how much difference the fire bricks made. Just as aside (and with no graph to back it up), I noticed a significant difference when my water pan dried out, but nothing nearly as drastic.
-
TexLaw the water pan would slow down the cook but it wouldn’t necessarily let the measured temperature. By having more moisture in the air the thermal processing will go faster as the evaporation energy coming off of the meat will be lessened.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register LoginSponsored By:
