Walton’s 36 x 24 SS Table Item #: 253997
-
$149.00
18 gauge steel.
300 lbs for the table top
300 lbs for the adjustable shelf.
There are no casters available to fit these tables from WaltonsThe tables are perfect for our uses. We ordered two of them and I and my wife put them together and used vice grips temporarily for welding to hold them together to make a larger table top.
I contacted customer service about them and Raven , a young lady there, answered my questions super fast with follow up info. I have never had that quick of a response from any customer service division. Thumbs up to Raven and Walton’s. Raven said they will be updating the description to include the gauge of steel and the poundage that they will support.
The hardware is solid and will work. I am 6’ 1" at 210 lbs and I sat on the top and it was fine. I crawled onto the bottom shelf and it held. Now, remember that its only allen screws holding up the shelf, but they are large and take a good bite into the table leg. I used an electric drill to torque them down.
These are simple tables and perfect for a small processing set up and are light but strong. I will probably get one more.Thanks to Raven and Waltons. My first batch of sausage…ever…was made on February 5th, 2022. The eleven pound stuffer and tables were perfect.
-
$149.00
18 gauge steel.
300 lbs for the table top
300 lbs for the adjustable shelf.
There are no casters available to fit these tables from WaltonsThe tables are perfect for our uses. We ordered two of them and I and my wife put them together and used vice grips temporarily for welding to hold them together to make a larger table top.
I contacted customer service about them and Raven , a young lady there, answered my questions super fast with follow up info. I have never had that quick of a response from any customer service division. Thumbs up to Raven and Walton’s. Raven said they will be updating the description to include the gauge of steel and the poundage that they will support.
The hardware is solid and will work. I am 6’ 1" at 210 lbs and I sat on the top and it was fine. I crawled onto the bottom shelf and it held. Now, remember that its only allen screws holding up the shelf, but they are large and take a good bite into the table leg. I used an electric drill to torque them down.
These are simple tables and perfect for a small processing set up and are light but strong. I will probably get one more.Thanks to Raven and Waltons. My first batch of sausage…ever…was made on February 5th, 2022. The eleven pound stuffer and tables were perfect.
270WSM i have one of these tables and I really like it.
-
I need a portable table for a full size meat slicer. Is this unit stable enough to absorb the back and forth rocking as the slicer is running?
-
I need a portable table for a full size meat slicer. Is this unit stable enough to absorb the back and forth rocking as the slicer is running?
samspade my slicer is manual, and it has no problems. It’s pretty stable since the bottom anchors the legs. The leveling legs are plastic and may be an issue on a slippery surface when the slicer is operating.
-
$149.00
18 gauge steel.
300 lbs for the table top
300 lbs for the adjustable shelf.
There are no casters available to fit these tables from WaltonsThe tables are perfect for our uses. We ordered two of them and I and my wife put them together and used vice grips temporarily for welding to hold them together to make a larger table top.
I contacted customer service about them and Raven , a young lady there, answered my questions super fast with follow up info. I have never had that quick of a response from any customer service division. Thumbs up to Raven and Walton’s. Raven said they will be updating the description to include the gauge of steel and the poundage that they will support.
The hardware is solid and will work. I am 6’ 1" at 210 lbs and I sat on the top and it was fine. I crawled onto the bottom shelf and it held. Now, remember that its only allen screws holding up the shelf, but they are large and take a good bite into the table leg. I used an electric drill to torque them down.
These are simple tables and perfect for a small processing set up and are light but strong. I will probably get one more.Thanks to Raven and Waltons. My first batch of sausage…ever…was made on February 5th, 2022. The eleven pound stuffer and tables were perfect.
270WSM If the tubes are standard sized, you can probably find casters somewhere. Most all tables tube are 1", just depends on how the bottom tips are mounted
-
A good caster supplier will have the correct round socket inserts that go in the base of the hollow legs to adapt them to standard stem castors.
Saw several offerings on Amazon and ebay.
-
samspade my slicer is manual, and it has no problems. It’s pretty stable since the bottom anchors the legs. The leveling legs are plastic and may be an issue on a slippery surface when the slicer is operating.
GWG8541 thanks I have got to get the grinder, and slicer out of the kitchen soon. : )
-
These tables sound good for an outdoor kitchen. I need a few stainless tables for mine.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register LoginSponsored By:
