Looking for a new smoker
-
There are smokers that use pellets for heat and smoke, but for precise low range temperature control, it is hard to beat electric heat.
If I had a pellet smoker and wanted to make sausage in it, I would be looking hard at adding an electric element, either as a permanent retrofit or even adding a 1200 watt electric hot plate in the base, which is usually with in the abilities of a do-it-your-selfer.
processhead said in Looking for a new smoker:
There are smokers that use pellets for heat and smoke, but for precise low range temperature control, it is hard to beat electric heat.
If I had a pellet smoker and wanted to make sausage in it, I would be looking hard at adding an electric element, either as a permanent retrofit or even adding a 1200 watt electric hot plate in the base, which is usually with in the abilities of a do-it-your-selfer.
It does look like I am going to have to start over and look at electric smokers. If I end up with a Pk 100 I am blaming you all when my daughter has to go to juco
-
processhead said in Looking for a new smoker:
There are smokers that use pellets for heat and smoke, but for precise low range temperature control, it is hard to beat electric heat.
If I had a pellet smoker and wanted to make sausage in it, I would be looking hard at adding an electric element, either as a permanent retrofit or even adding a 1200 watt electric hot plate in the base, which is usually with in the abilities of a do-it-your-selfer.
It does look like I am going to have to start over and look at electric smokers. If I end up with a Pk 100 I am blaming you all when my daughter has to go to juco
Grimpuppy said in Looking for a new smoker:
If I end up with a Pk 100 I am blaming you all when my daughter has to go to juco
She’ll eat well, at least.
-
There are smokers that use pellets for heat and smoke, but for precise low range temperature control, it is hard to beat electric heat.
If I had a pellet smoker and wanted to make sausage in it, I would be looking hard at adding an electric element, either as a permanent retrofit or even adding a 1200 watt electric hot plate in the base, which is usually with in the abilities of a do-it-your-selfer.
processhead said in Looking for a new smoker:
There are smokers that use pellets for heat and smoke, but for precise low range temperature control, it is hard to beat electric heat.
If I had a pellet smoker and wanted to make sausage in it, I would be looking hard at adding an electric element, either as a permanent retrofit or even adding a 1200 watt electric hot plate in the base, which is usually with in the abilities of a do-it-your-selfer.
I have a P&S Maverick 1250 in stainless steel without the side box (killer smoker for anyone looking). I am new to sausage making (but have been making BBQ for 25+ years). I did snack sticks last week on my P&S at 180F as that is as low as it goes but would love to be able to start at 120F and ramp up as most recipes call for.
Any advice on a electric element that would work with my P&S? Can I just run the cord for it under my lid without issues from heat? Also would element have its own thermostat or would I need to wire a temp controller in to shut it off/on?
-
Jonathon - do you have a floor model Camp Chef XXL in the store?
-
Grimpuppy Yes they do have a floor model of it.
-
Grimpuppy
“I currently have a Masterbuilt XL propane smoker. The propane smoker has served me well for many years but I haven’t used it in at least 2 years. Just to finicky to keep temp constant, especially if there is wind.”First of all is your burner ok?
Second, have you ever thought of installing a needle valve in line? Simple and really inexpensive!
My GOSM is a similar smoker and I did the mod just last year. Man O Man, what a world of difference!! Why did I ever put off doing it???I can control temp down to approx 75 degrees F. @ a +/- of less than 5 degrees.
Look into Bayou Classic Brass Control Valve / Knurled Needle Valve
https://www.bayouclassicdepot.com/products/bayou-classic-brass-control-valve-nv108p
Then 2 fittings, before and after to hook it up and your in business!
It really worked for me, might you too. I should have done it 15 to 20 years ago. -
75 degrees is pretty impressive! Anything under about 170 on mine and a slight breeze will blow out the flame. I built a metal skirt that goes around the bottom to keep the wind off it. It helps but I never trust it to cook under 225 if I am not monitoring it. If the flame goes out, it just starts pumping propane into the smoker.
-
I turn the bottle on and the cooker on to full and dial in the temp from the needle valve. My result was in about last Dec/ Jan here in Iowa.
-
GWG8541 if your gonna spend the money on the Pitts spitts your better off buying the pk100
twilliams you are right and have some change left over. The smoke box does look small on the PS. Im still trying to figure out what I’ll be telling the wife if I buy a PK100. If she ask anyone here it was only 200 bucks.
-
I turn the bottle on and the cooker on to full and dial in the temp from the needle valve. My result was in about last Dec/ Jan here in Iowa.
@dennyo said in Looking for a new smoker:
I turn the bottle on and the cooker on to full and dial in the temp from the needle valve. My result was in about last Dec/ Jan here in Iowa.
For $9 it’s worth a shot! Going to give it a try.
-
Let me know what you think of your outcome uppy. I’m in hopes that you may be able to tame your gasses as I have mine. I’ve had the the Big Block GOSM for 15 +/- years now and had a smaller version for 6 years prior. Like I said I should have acted on this years ago. jmo.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register LoginSponsored By:
