Bowl cutting question (adding salt)
-
processhead thank you. I will let you know. Should be fun no matter what happens.
I don’t know the age or condition of your chopper, and maybe you know this already.
To perform at its best, the knives on your chopper need to be honed as sharp as you can possibly get them. -
smokinbubba there has been some posts about juicers that emulsion meat that you can use for small batches of bologna & hot dogs I forget the brand name
craigrice said in Bowl cutting question (adding salt):
smokinbubba there has been some posts about juicers that emulsion meat that you can use for small batches of bologna & hot dogs I forget the brand name
Yep, thats me. Its a champion juicer. Makes awesome bambi dogs and bambi bologna. Just takes a Loooong time to feed sticky meat into. Small throat. A bowl chopper with ice would make a superior emulsion in a fraction of the time.
-
twilliams I have found more than a few bowl cutting videos out there. Almost all involving meat emulsion are the huge commercial machines. The ones with my machine (hobart) are almost all vegtables, pulled pork etc. They are fun to watch though.
-
From what I gather, the big commercial choppers turn at much higher RPMs. These smaller bowl choppers have some limitations for sausage making. I don’t think mine could give the fine emulsion like you see in a commercial bologna or wiener.
Paul
-
From what I gather, the big commercial choppers turn at much higher RPMs. These smaller bowl choppers have some limitations for sausage making. I don’t think mine could give the fine emulsion like you see in a commercial bologna or wiener.
processhead from one video i seen i can understand why my dad does not eat hotdogs. He used to work at Oscar Meyer
-
twilliams I have found more than a few bowl cutting videos out there. Almost all involving meat emulsion are the huge commercial machines. The ones with my machine (hobart) are almost all vegtables, pulled pork etc. They are fun to watch though.
IVERYAN not sure why your posts keep getting deleted. That is 3 in a row now.
-
twilliams Yeah im trying to upload pics. It keeps giving an error message, so i have deleted. I wasn’t sure if everyone else could see my deleted posts. Obviously you can see them, im not sure if its my internet connection or what. Thanks for letting me know.
-
twilliams Yeah im trying to upload pics. It keeps giving an error message, so i have deleted. I wasn’t sure if everyone else could see my deleted posts. Obviously you can see them, im not sure if its my internet connection or what. Thanks for letting me know.
IVERYAN They are probably too large, screenshot them and try posting again.
Isaiah 5:22 Woe to those who are heroes at drinking wine and champions at mixing drinks
-
) -
-
-
IVERYAN wow that turned out nicely
-
Here is my batch i did today ranch and fajita, grind twice and mix by hand. As you can see i get shrinkage showing some casing wrinkle.
-
Those look great. You would never know they were mixed by hand.
-
IVERYAN
It looks like you are getting a pretty fine emulsion there. -
Here’s the process that I’ve been using for frankfurters
- Add Meat
2.Add Fat
3.Add Sure Gel & Salts - Add Ice
- Add Seasoning
Stop @58F
Pivodog Apologies for my delayed response. I was having problems logging in with the app.
Yes, the snack sticks turned out great. I have only had time to use the bowl cutter once for meat emulsion. I made a 25 lb block & tried to get it done with 2-12.5lb batches in the cutter. It was a little too much, so I plan to process 25 lbs in 3 batches in the future.
Jonathon shared a bowl cutter recipe from a meat cutting class he took at Wisconsin. I will post it on the board if he is ok with me doing that. It is very similar to what you posted, except it breaks it down a little further. It says to stop @58F like you do.
I stopped both of my batches at around 44F. For some reason the temp was rising very slowly & I had great protein extraction at that point. - Add Meat
-
Pivodog Apologies for my delayed response. I was having problems logging in with the app.
Yes, the snack sticks turned out great. I have only had time to use the bowl cutter once for meat emulsion. I made a 25 lb block & tried to get it done with 2-12.5lb batches in the cutter. It was a little too much, so I plan to process 25 lbs in 3 batches in the future.
Jonathon shared a bowl cutter recipe from a meat cutting class he took at Wisconsin. I will post it on the board if he is ok with me doing that. It is very similar to what you posted, except it breaks it down a little further. It says to stop @58F like you do.
I stopped both of my batches at around 44F. For some reason the temp was rising very slowly & I had great protein extraction at that point. -
IVERYAN I swear I responded to this…yes, it is fine if you post that recipe I sent you.
Get more help with your processing questions and learn more about processing meat by subscribing to our waltonsinc.com youtube page at https://wltns.link/waltonstv I am a Gorilla, love yourself
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register LoginSponsored By:
