Least favorite piece of equipment to clean
-
Gotta be the jerky slicer for me, I can have my 22qt. Mixer cleaned in no time!
-
Just cleaning up after doing some polish dogs and hot links. Was thinking how much better it would be if I didn’t have to clean up. Johnathan probably has an intern to do it for him
. My least favorite piece of equipment to clean by far is the mixer. No way to break it down so it fits in the sink like the grinder and stuffer. -
-
That’s the sink I need. I did upgrade to that style of faucet a while back though. Makes cleaning much easier.
-
I mentioned it in the cleaning thread, but having a cleaning area with a hose mounted sprayer really helps during equipment washdown on big kettles and equipment.
-
Stuffer for me. Mine does not have legs! (11lb cabelas made by trespade i think 15yers old) It flops around everywhere with only the neck, centered on the bottom. What a PITA. My mixers are way easier but the Queen does have a Huge sink in the kitchen. I’m thinking of moving my entire operation to a room in the pole barn, but for now, the mice have made me not pull the trigger on that. My “meat” room will have stainless sink and prep tables.
-
Mine is for sure my slicer. I have to remove the blade with 3 little screws and theres to way to hold the blade while you take it off the drive shaft. I always make sure I have my boots on that way if I was to drop the blade my toes wont fly all over the house…they’ll just be in the other half of the boot.
-
My slicer is not bad to clean. The carriage and the knife guard are removable. The knife is removable too, but it can be cleaned in place, and all the exposed parts can be reached pretty easily.
I had the knife off a couple of times in the past, and while handling it, I thought about whether my wife would be able to get the bleeding stopped before I bled out on the floor.
-
I remove and wash my slicer blade and behind it every use as particles can and do get behind it
-
I remove and wash my slicer blade and behind it every use as particles can and do get behind it
craigrice If I could get away with NOT cleaning behind my slicer blade I would for sure. Scares the crap out of me every time.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register LoginSponsored By:
