Smoker cleaning
-
I clean my grates with zep 505 and a pressure washer, takes longer to hookup the washer than to clean the grates!
-
After last smoke noticed I was getting some black flakes off the top. Time to clean… Going to order some of Walton’s smokehouse cleaner. Question is that is says to rinse with hot water. I have an LP smoker so not wanting to do that. Has anyone used this product for this type of smoker? I guess I could cover the burner unit. Thoughts?
Jonathan could be a topic for future podcast or livestream.
PapaSop I’ve used the smokehouse cleaner on my grates and doors. I dilute it 50/50 with water and spray on. I also do it in a $6.00 kiddie pool on a hot day and just rinse with the hose. For the inside I just scrape it down with a cheap plastic putty knife or old gift cards used as scrapers and then vacuum out the residue. By scrapping you won’t have to re-season. I do both of my Traegers this way and haven’t had any issues.
-
PapaSop I’ve used the smokehouse cleaner on my grates and doors. I dilute it 50/50 with water and spray on. I also do it in a $6.00 kiddie pool on a hot day and just rinse with the hose. For the inside I just scrape it down with a cheap plastic putty knife or old gift cards used as scrapers and then vacuum out the residue. By scrapping you won’t have to re-season. I do both of my Traegers this way and haven’t had any issues.
Bob Stehlik got to say a smoker is a smoker. IT’s A FIRE PIT. Knock off the loose stuff Chemicals in it, in my option not good. Clean the racks scrap off the sides but Don’t use chems On the walls. Chem’s will be there for a very long time. IT’S A FIRE PIT!!!
-
I have a cheap electric pressure washer that was given to me and I run a hose from hot water in the garage and use like a low pressure steam cleaner. No soap no chemicals. Works great.
-
After last smoke noticed I was getting some black flakes off the top. Time to clean… Going to order some of Walton’s smokehouse cleaner. Question is that is says to rinse with hot water. I have an LP smoker so not wanting to do that. Has anyone used this product for this type of smoker? I guess I could cover the burner unit. Thoughts?
Jonathan could be a topic for future podcast or livestream.
PapaSop I use 50/50 vinegar and water along with a Scotch Brite pad. Scrub the areas and fresh water wipe down. Plastic scraper any rough areas.
-
Bob Stehlik got to say a smoker is a smoker. IT’s A FIRE PIT. Knock off the loose stuff Chemicals in it, in my option not good. Clean the racks scrap off the sides but Don’t use chems On the walls. Chem’s will be there for a very long time. IT’S A FIRE PIT!!!
JoeB said in Smoker cleaning:
Bob Stehlik got to say a smoker is a smoker. IT’s A FIRE PIT. Knock off the loose stuff Chemicals in it, in my option not good. Clean the racks scrap off the sides but Don’t use chems On the walls. Chem’s will be there for a very long time. IT’S A FIRE PIT!!!
The following may not apply to the level of cleaning Papasop wants to do:
I would agree before you put food back in the smoker you want to remove any remaining cleaning residue.
If you are going to be using cleaners in a smoker, you need to be able to either rinse down or wipe down the loosened residue. You also want to make sure the smoker is designed so that it can be rinsed down in a way that doesn’t just flush the runoff into some enclosed area of the smoker that traps it.A smoker with a stainless interior is probably going to have electric or gas controls, sensors, and elements you will need to protect before applying cleaners or rinse water.
IMO, some smoker designs just were not really intended for heavy duty cleaners or spraying with water. Consult the manufacturers instructions before you attempt any aggressive cleaning methods on your smoker unless it is a really basic design like a stick burner.
A smoker with a smooth stainless interior design is going to be a lot easier to clean down to the bare metal which is one of the reason for using stainless steel. Contrast that with a black iron/ carbon steel pipe or box smoker interior where you probably don’t want to do much cleaning at all, just a little scraping or brushing of heavy residue and excess grease.
Cleaning the grates is a good idea for any smoker design. Normally you can remove the grates and clean them separately from the smoker, so you can use just about any method to get the grunge off them. Just make sure to thoroughly rinse any cleaners from them and maybe re-season with some food grade oil before putting food on them.
-
Last year a neighbor cleaned his almost new Masterbuilt 40” electric smoker. He used the dove spray on the inside walls and rinsed with hot water. After it dried he plugged it in and the GFI popped. Long story short. Grease/ cleaner migrated in back of the heater element. Had to take apart, clean and replaced element. Not a happy smoker! Any residue on the element terminals will look like a current leak and the GFI will pop. Time to replace. New element!!
-
JoeB said in Smoker cleaning:
Bob Stehlik got to say a smoker is a smoker. IT’s A FIRE PIT. Knock off the loose stuff Chemicals in it, in my option not good. Clean the racks scrap off the sides but Don’t use chems On the walls. Chem’s will be there for a very long time. IT’S A FIRE PIT!!!
The following may not apply to the level of cleaning Papasop wants to do:
I would agree before you put food back in the smoker you want to remove any remaining cleaning residue.
If you are going to be using cleaners in a smoker, you need to be able to either rinse down or wipe down the loosened residue. You also want to make sure the smoker is designed so that it can be rinsed down in a way that doesn’t just flush the runoff into some enclosed area of the smoker that traps it.A smoker with a stainless interior is probably going to have electric or gas controls, sensors, and elements you will need to protect before applying cleaners or rinse water.
IMO, some smoker designs just were not really intended for heavy duty cleaners or spraying with water. Consult the manufacturers instructions before you attempt any aggressive cleaning methods on your smoker unless it is a really basic design like a stick burner.
A smoker with a smooth stainless interior design is going to be a lot easier to clean down to the bare metal which is one of the reason for using stainless steel. Contrast that with a black iron/ carbon steel pipe or box smoker interior where you probably don’t want to do much cleaning at all, just a little scraping or brushing of heavy residue and excess grease.
Cleaning the grates is a good idea for any smoker design. Normally you can remove the grates and clean them separately from the smoker, so you can use just about any method to get the grunge off them. Just make sure to thoroughly rinse any cleaners from them and maybe re-season with some food grade oil before putting food on them.
processhead said in Smoker cleaning:
JoeB said in Smoker cleaning:
Bob Stehlik got to say a smoker is a smoker. IT’s A FIRE PIT. Knock off the loose stuff Chemicals in it, in my option not good. Clean the racks scrap off the sides but Don’t use chems On the walls. Chem’s will be there for a very long time. IT’S A FIRE PIT!!!
The following may not apply to the level of cleaning Papasop wants to do:
I would agree before you put food back in the smoker you want to remove any remaining cleaning residue.
If you are going to be using cleaners in a smoker, you need to be able to either rinse down or wipe down the loosened residue. You also want to make sure the smoker is designed so that it can be rinsed down in a way that doesn’t just flush the runoff into some enclosed area of the smoker that traps it.A smoker with a stainless interior is probably going to have electric or gas controls, sensors, and elements you will need to protect before applying cleaners or rinse water.
IMO, some smoker designs just were not really intended for heavy duty cleaners or spraying with water. Consult the manufacturers instructions before you attempt any aggressive cleaning methods on your smoker unless it is a really basic design like a stick burner.
A smoker with a smooth stainless interior design is going to be a lot easier to clean down to the bare metal which is one of the reason for using stainless steel. Contrast that with a black iron/ carbon steel pipe or box smoker interior where you probably don’t want to do much cleaning at all, just a little scraping or brushing of heavy residue and excess grease.
Cleaning the grates is a good idea for any smoker design. Normally you can remove the grates and clean them separately from the smoker, so you can use just about any method to get the grunge off them. Just make sure to thoroughly rinse any cleaners from them and maybe re-season with some food grade oil before putting food on them.
-
Thought I’d better take a look at the owners manual to see what they recommend ( yeah, one of those guys, still have manuals for stuff I no longer have ). So this is for the Masterbuilt Pro Temp XL, LP version.
Mild detergent on all removeable pieces. Interior just wipe down with damp cloth. " Do not use a cleaning agent ". Dry thoroughly.
Guess that says it all. Will have to scrape a little with a plastic putty knife. Some build up in a few places.
-
Yep that said it all.
-
Finally got to it with a high of 86 today. 40’s to 80’s is a bit of an adjustment. No chemicals used. Just used a plastic scraper and wiped down. Hate to lose that patina but it was time. Still don’t know why they feel the need to put glass in the door. Will be covered first smoke.
Miller time.
-
Finally got to it with a high of 86 today. 40’s to 80’s is a bit of an adjustment. No chemicals used. Just used a plastic scraper and wiped down. Hate to lose that patina but it was time. Still don’t know why they feel the need to put glass in the door. Will be covered first smoke.
Miller time.
PapaSop You got rid of all the good “flavor”!!! 84 here in Colorado today so yes it Miller Time here too!
Improvise, Adapt and Overcome! Semper Fi
-
Finally got to it with a high of 86 today. 40’s to 80’s is a bit of an adjustment. No chemicals used. Just used a plastic scraper and wiped down. Hate to lose that patina but it was time. Still don’t know why they feel the need to put glass in the door. Will be covered first smoke.
Miller time.
PapaSop IT’S A FIRE PIT!!! Knock off the loose stuff if it bothers you but to re-season or contaminate your smoker??? Why. . . . What was done 50-75yrs ago??? Did they scrub the bricks, the corrugated tin, cardboard, or 55gl barrel insides, I think not fellow sausage Warrior.
-
PapaSop You got rid of all the good “flavor”!!! 84 here in Colorado today so yes it Miller Time here too!
Bob Stehlik It’s always 1700hrs some where… Pick your time zone, Alfa thru Zulu
-
Finally got to it with a high of 86 today. 40’s to 80’s is a bit of an adjustment. No chemicals used. Just used a plastic scraper and wiped down. Hate to lose that patina but it was time. Still don’t know why they feel the need to put glass in the door. Will be covered first smoke.
Miller time.
PapaSop I agree totally, just a marketing gimic. I picked mine up at a show and the price was right, but I told the rep that is the most useless thing that you need on a smoker.
-
PapaSop You got rid of all the good “flavor”!!! 84 here in Colorado today so yes it Miller Time here too!
Bob Stehlik does the black creasote really give meat flavor? I know that people talk about seasoning it and such but I don’t quite understand where a creasote lined smoker gives off a flavor profile on meat. Im thinking when they talk about seasoning it is for new smokers to get any impurities burned off from the factory. I know it’s time to get mine cleaned up as I get creasote dripping on to my meat products which gives it a bitter taste. I will have to do some research on this but I’m sure it’s just gonna come to be opinion and not fact studied research and testing. I hope I’m wrong and will consider leaving it alone.
-
Finally got to it with a high of 86 today. 40’s to 80’s is a bit of an adjustment. No chemicals used. Just used a plastic scraper and wiped down. Hate to lose that patina but it was time. Still don’t know why they feel the need to put glass in the door. Will be covered first smoke.
Miller time.
PapaSop that wind was absolutely rediculous, doing a full front steering job and wheel bearings on the truck. It’s bad enough getting grease and dirt falling in your face but to have it blowing too…ugh. I lost a big 12” limb on my tree today, actually as bad that tree is I’m surprised it took this long. Will have to do one cut at the bottom sooner or later.
-
twilliams Are you trying to start a riot?! Some people insist it does some people say that is nonsense. I won’t add my .02 but I WILL say, I dont clean my PK100 unless I am forced too.
Get more help with your processing questions and learn more about processing meat by subscribing to our waltonsinc.com youtube page at https://wltns.link/waltonstv I am a Gorilla, love yourself
-
twilliams Are you trying to start a riot?! Some people insist it does some people say that is nonsense. I won’t add my .02 but I WILL say, I dont clean my PK100 unless I am forced too.
Jonathon no riot starting here, just a lack of understanding, knowledge and evidence proving the theory. As stated people saying one thing and others saying another, how can we test this theory accurately? My thoughts is the smoke generated in mid air is what adheres to the meat surface not remnants from the interior cabin.
-
twilliams Are you trying to start a riot?! Some people insist it does some people say that is nonsense. I won’t add my .02 but I WILL say, I dont clean my PK100 unless I am forced too.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register LoginSponsored By:
